Search results for "usb l"
LabNation LabNation SmartScope USB Oscilloscope
Smartscope is the only scope in the world that runs on all major platforms: Windows, macOS, Linux, Android and iOS (with WiFi bridge). Connect the SmartScope to pretty much any device! Even more, you can get mobile with it: take the SmartScope on the road, thanks to the single-cable connectivity. Everything is going to be intuitive: pointing, pinching and swiping finally replaces the clunky interfaces of old scopes. With the SmartScope you develop your digital interfaces using the 100 MS/s logic analyzer. With this tool you can design any signal you want using Excel, then upload it to the built-in Arbitrary Waveform Generator (AWG). At the end capture the voltage at any point of your design at 100 million times each second. The Software for the support of Windows / macOS) / Linux / Android and Export formats (Excel .csv / Matlab .mat) are given. Features Channel sampled at 100 MHz/s each AC/DC coupling on analog inputs 100% silent 64 Mbit RAM: x10000 zoom Arbitrary Waveform Generator 8 digital inputs at 100 MS/s each 4 digital outputs at 100 MS/s each Externally power your scope in case your mobile can't supply the juice. Specifications Oscilloscope Bandwidth 30 MHz (-3 dB point) Sample rate 2x 100 MS/s Channels 2 Max pre-trigger position 16x full scale Max post-trigger position Full scale Max full voltage scale 10 V/div (±35 V input range) Min full voltage scale 20 mV/div Analog input range -35 V, +35 V Max input peak-to-peak 40 V Signal coupling AC / DC Precision 8 bit Input impedance 1 MΩ // 10 pF Waverforms 200 waveforms/s Data delay to host < 10 ms Sample depth Up to 4 million samples per channel External trigger Yes Logic Analyzer Input channels 8 Input impedance 100 kOhm // 2 pF to GND Sample rate 100 MS/s Logic level 1.8 V to 5.0 V Diode protection Bidirectional Input data buffer 4 million samples Waverforms 200 waveforms/s Data delay to host < 10 ms Protocol decoders I²C, SPI, UART, I²S integrated User extensible Wave Generator (Analog Output) Output channels 1 Data rate Up to 50 MS/s Output level 0-3.3 V (Opamp driven) Output buffer Up to 2048 samples Max slew rate 30 ns/V Step 13 mV Wave Generator (Digital Output) Channels 4 Data rate Up to 100 MS/s Output level 3.3 V or 5 V (selectable) Output buffer Up to 2048 samples Diode protected Yes Programmable Logic USB controller MicroChip PIC18F14K50 USB interface PicKit3 or USB flashable FPGA Xilinx Spartan 6 FPGA interface JTAG and USB flashable Size & Weight Dimensions (L x W x D) 4.33 x 2.52 x 0.95' (110 x 64 x 24.2 mm) Weight 158 g Case Aluminium Connectivity Device/Host mini USB included Record waveforms Store Matlab (.mat) or Excel (.csv) files through Dropbox Analog BNC 2 probes included Digital 8x 0.1' pitch, probes (included) Sync USB micro B-B Power USB micro B (optional) Included 1x SmartScope USB Oscilloscope 2x Analog probes 1x Digital probe cable 1x Mini-B USB cable Downloads User manual Software GitHub Wiki
€ 239,00€ 149,95
Members identical
Andonstar Andonstar A1 USB Digital Microscope
Specifications DSP: High power Digital Image Monarch Processor Sensor: high-quality CMOS sensor, 2M pixel (hardware, no Interpolation) Resolution: 640x480,1600x1200 Interface: USB 1.1 / USB 2.0 Frame rate: 30 frames/sec (When resolution at 640x480), 1600x1200 5 frames/sec Focal distance: 5-30 mm (when Focal distance infinity, the microscope as a webcam, can not magnify) Magnification: Please refer to the sample photos and video Diameter: 12 mm USB cable length: about 165 cm USB cable color: black or transparent color (random) Lighting: 8x LED around the camera lens Included 1x Digital Microscope Camera 1x Software CD (User manual included) 1x Metal big base Stand
€ 79,95€ 54,95
Members € 49,46
Elektor Labs USB-RS232 Converter (FT231X BoB)
In 2011 we published a small PCB, FT232R USB/Serial Bridge/BOB (110553) with a USB-UART IC from FTDI, the FT232RQ. Here we present its successor with a cheaper version, an FT231XQ. But there are some other changes too. Instead of connectors, alongside the PCB, normal pin headers are used that are mounted on the bottom side and make the PCB a little smaller when mounted, compared to the old BoB. An ESD protection device (D1) is added in the USB data signal lines for extra safety. Despite less room for all parts to fit on the PCB, it is only a little over 2 mm longer. The FT231 has four configurable CBUS I/O pins, one less now. More importantly, however, the power supply for the I/O's VCCIO is only specified for +1.8 V to +3.3 but is 5 V tolerant for external UART logic running on +5 V. The +3.3 V internal regulator of the FT231 can deliver 50 mA to external circuitry. The manufacturer FTDI has a utility to configure several settings, FTPROG. Such as the function of the CBUS pins. By default, CBUS1 and CBUS 2 are low-level outputs to drive receive and transmit LEDs, indicating data transfer on the USB bus. So, when receiving data through the UART, the TX LED lights up. If you prefer this the other way around, FTPROG can be used to change this. But be careful the chip can become unresponsive when wrong settings are programmed. Some of the more important properties of the new BoB: Micro-USB connector USB 2.0 Full Speed capable VCCIO +1.8...+3.3 V (max. 4 V, 5 V input from UART logic tolerant) +3.3 V regulator output, max. 50 mA Data transfer 300 baud to 3 Mbaud UART Compatible with RS232, RS485, and RS422 I/O pin output drive 4 mA - 16 mA 4 configurable CBUS pins Here you can find information regarding the EEPROM Programming Utility, the VCP Drivers and the D2XX Drivers.
€ 19,95
Members € 17,96
SB Components USB-C to LoRa Dongle (EU868)
USB-C to LoRa Dongle is a powerful and versatile LoRa device that lets you connect beyond boundaries. With its exceptional range and easy connectivity, it allows you to seamlessly communicate with devices up to 5 km away. LoRa Dongle is the perfect solution for anyone looking to establish long-range wireless communication in a variety of applications. This dongle provides direct USB interface control, eliminating the need for a deep understanding of LoRa transmission concepts. They seamlessly connect with devices like Raspberry Pi, SBCs, PCs, and laptops, simplifying the creation of IoT LoRa gateways. The USB LoRa Dongles function as transmitters and receivers, accommodating various message formats, including text, hexadecimal, and decimal. Features Device with the most recent LoRa module, offering up to a 5-kilometer data transmission range and higher speeds. Use new generation LoRa spread spectrum to ensure stable communication Type C interface for LoRa configuration/Power Status LED for power and data transmission Serial TX/RX pin breakout in Header and Screw terminal form Onboard jumper for operating mode selection Specifications Carrier Frequency (License Free ISM): 868 MHz Chip: Based on SX1262 RF chip Range: 5Km Transmitting Power: 22 dBm Receiving Sensitivity: -147 dbm Data Rate: Up to 62.5 kbps Interface: Type C Communication Port: UART serial Supply Voltage: 5 V Operating Voltage: 3.3 V Operating Temperature: -20 to 70°C Included 1x USB-C to LoRa Dongle 1x Antenna (868 MHz)
€ 24,95
Members € 22,46
USB Logic Analyzer (8-ch, 24 MHz)
This USB Logic Analyzer is an 8-channel logic analyzer with each input dual purposed for analog data recording. It is perfect for debugging and analyzing signals like I²C, UART, SPI, CAN and 1-Wire. It operates by sampling a digital input connected to a device under test (DUT) at a high sample rate. The connection to the PC is via USB. Specifications Channels 8 digital channels Maximum sampling rate 24 MHz Maximum input voltage 0 V ~ 5 V Operating temperature 0°C ~ 70°C Input impedance 1 MΩ || 10 pF Supported protocols I²C, SPI, UART, CAN, 1-Wire, etc. PC connection USB Dimensions 55 x 28 x 14 mm Included USB Logic Analyzer (8-ch, 24 MHz) USB Cable Jumper Wire Ribbon Cable Downloads Software
€ 12,95
Members € 11,66
JOY-iT JOY-iT HD35 USB Load Resistor (35 W)
The HD35 offers you a compact electronic USB-load-resistor with a performance capability up to 35 Watt. The present current can be easily read on the LCD-Display. Moreover, the device has an adjustable trimmer and is because of this capable of simulating different charging electronics like QC2.0, QC3.0, FCP and AFC 9V. The maximal voltage is up tp 25 V and the maximal current is up to 5 A. This is the reason that it is suitable for nearly every area of application. The built-in cooling component in connection with the temperature controlled fan unit is very effective in cooling down the complete device. With the help of the integrated button it is possible to activate or deactivate the configurated load very fast. Features USB Load Resistor up to 35 W Adjustable via built-in trimmer LCD display of actual current strength Buttons for switching the load on/off Simulation of different charging electronics: QC2.0 (5 V, 9 V, 20 V), QC3.0, FCP, AFC 9V Technical Details Operating Voltage 4 V - 25 V Operating Current 0.25 A - 5 A Power 35 W Measuring Temperature Range -10 °C - 40 °C Display 4 Digit Segment Display Display Color Red Fan Speed 8000 RPM ± 10% | Temperature-controlled Connections USB 2.0, MicroUSB, USB Type-C Dimensions 84 mm x 41 mm x 28 mm Weight 52 g
€ 24,95
Members € 22,46
FNIRSI 65 W USB-C PD GaN Power Supply
With this 65 W USB-C PD power supply (with GaN technology) and the included USB-C cable you can start using the FNIRSI HS-01 soldering iron straight away. Of course, you can also use this charger to fast charge your tablets and smartphones via USB-C and USB-A. Included 65 W USB-C PD GaN Power Supply (EU) USB-C cable (1.2 m)
€ 24,95
Members € 22,46
SB Components RangePi - LoRa USB Dongle based on RP2040 (EU868)
The RangePi – LoRa USB Dongle uses the Semtech SX1262 that allows communications up to 5 km. The RangePi can be used with any device that utilizes a USB connection, eliminating the need for extra equipment just to connect to the LoRa network. Specifications 1.14” LCD RP2040 MCU Up to 5 km distance UART Included 1x RangePi 1x Antenna Downloads STEP File Product Dimension 3D PDF File Schematic File GitHub
€ 54,95
Members € 49,46
Elektor Classics The Complete Linear Audio Library (USB Stick)
Jan Didden created Linear Audio in 2010 and published 14 Volumes between 2010 and 2017. Each 200-page Volume contains on average 10 articles by expert authors in the field of audio, acoustics, and instrumentation. Whether you are interested in tube amplifiers, solid-state equipment, loudspeaker design, capacitor and resistor distortion or distortion measurement, you are certain to find helpful advice and interesting discussions. From beginner to advanced level, for the audio professional or the serious hobbyist, this ExpertCollection will advance your understanding and offer new perspectives on common issues. Bonus material included with this collection is a 5-part YouTube series on negative feedback as applied to audio by renowned author Jan Didden, and nine additional landmark audio articles and presentations. If you are seriously interested in audio, acoustics, and instrumentation, you can’t afford to miss this! The published material is indexed and fully searchable and will provide an almost limitless resource for many years to come. You can read about Linear Audio’s authors, and the Table of Contents of each Volume, at linearaudio.net.
€ 149,95€ 79,95
Members identical
PeakTech PeakTech 5615 Thermal Imaging Camera (160x120) with USB and Software
The PeakTech 5615 is a full-fledged thermal imaging camera with a thermal resolution of 160x120 thermal image points and a high-quality sensor, which makes even the smallest temperature differences visible.All thermal images can be opened and evaluated using the enclosed software, with subsequent changes, e.g. can be done on the pallet selection.Use this new development e.g. to find thermal bridges in thermography, leaks in systems and pipe systems or track heating pipes in walls and floors.In electrical engineering, this thermal imager offers the possibility of contact problems and contact resistances e.g. to be found in sub-distributions and thus to prevent a fire risk in good time. Modern IR thermal imaging technology 2.4 'LCD color display and graphic menu navigation Thermal image resolution of 160 x 120 pixels High temperature measuring range up to + 550 °C High quality thermal image sensor with high temperature sensitivity Fast thermal imaging with 25 Hz Four color palettes (Iron, Rainbow, White, Black) Crosshairs, as well as cold and hot spot display Minimum and maximum value display Photo record with internal memory Records with time and date documentation USB interface for data transfer Also suitable for longer ranges (e.g. building thermography) IP 54 protected against dust and splash water Accessories: USB cable, software, charger and user manual Thermal Resolution 160 x 120 Pixel Temperature Range -20°C … 550°C / -4°F … 1022°F; 0,1° Resolution Accuracy +/- 2% +/- 2°C Display 2,4“ Color TFT Thermal Sensivity < 40 mK Field of View (FOV) 37,2° x 50° Wave Length 8 ... 14 µm Emissivity 0.01 ~ 1.0 Image Frequency 25 Hz Storage Micro SD - 8 GByte Data Interface USB Operation voltage 3350 mAh / 3.6 V Li-Ion Dimensions (WxHxD) 59 x 196 x 78 mm Weight approx. 350 g
€ 549,00
Members € 494,10
PeakTech PeakTech 5620 Thermal Imaging Camera (384x288) with USB, WiFi, Bluetooth and Software
The PeakTech 5620 is a professional thermal imaging camera with a high thermal resolution of 384x288 thermal image points and a variety of excellent features for work in building thermography or industrial use.In addition to the pure thermal image display, this new development also offers a PIP (picture-in-picture) display, a real image camera or a fusion function in which the contours of the real image recording are combined with the thermal image in order to ensure an even better display.All of the image modes mentioned can also be used for video recording, which also enables audio recordings for the respective video.The many functions are controlled via push buttons on the device, but also via the touch screen function of the color TFT display.All thermal images can be opened and evaluated using the enclosed software, with subsequent changes, e.g. can be done on the pallet selection. Professional thermal imaging technology 3.5 “touchscreen and graphic menu navigation Thermal image resolution of 384 x 288 pixels High temperature measuring range up to + 550 °C High quality thermal image sensor with high temperature sensitivity Fast thermal imaging with 25 Hz Seven color palettes (Iron, Rainbow, White, Black ...) Photo and video recordings with audio commentary WiFi, USB and Bluetooth interfaces IP 54 protected against dust and splash water Accessories: Hard case, 2 x Li-Po battery, charger, carrying strap, connection cable, software and instructions Thermal Resolution 384 x 288 Pixel Temperature Range -20°C … 550°C / -4°F … 1022°F; 0,1° Auflösung Accuracy +/- 2% +/- 2°C Display 3.5“ Touchscreen TFT Thermal Sensivity < 40 mK Field of View (FOV) 37,2°x 28,5° Pixel Pitch 17 µm IFOV 1.7 mrad Wave Length 8 ... 14 µm Emissivity 0.01 ~ 1.0 Image Frequency 25 Hz Storage Micro SD (64 GB) Data Interface USB, WiFI, Bluetooth Operation voltage 5000 mAh / 3.7V Li-Ion Dimensions (WxHxD) 100 x 244 x 104 mm Weight approx. 660 g
€ 3.495,00
Members € 3.145,50
Elektor Bundles Bundle: Logic Analyzers in Practice (Book) + USB Logic Analyzer (8-ch, 24 MHz)
PC USB Logic Analyzers with Arduino, Raspberry Pi, and Co. Step-by-step instructions guide you through the analysis of modern protocols such as I²C, SPI, UART, RS-232, NeoPixel, WS28xx, HD44780 and 1-Wire protocols. With the help of numerous experimental circuits based on the Raspberry Pi Pico, Arduino Uno and the Bus Pirate, you will learn the practical application of popular USB logic analyzers. All the experimental circuits presented in this book have been fully tested and are fully functional. The necessary program listings are included – no special programming or electronics knowledge is required for these circuits. The programming languages used are MicroPython and C along with the development environments Thonny and Arduino IDE. This book uses several models of flexible and widely available USB logic analyzers and shows the strengths and weaknesses of each price range. You will learn about the criteria that matter for your work and be able to find the right device for you. Whether Arduino, Raspberry Pi or Raspberry Pi Pico, the example circuits shown allow you to get started quickly with protocol analysis and can also serve as a basis for your own experiments. After reading this book, you will be familiar with all the important terms and contexts, conduct your own experiments, analyze protocols independently, culminating in a comprehensive knowledge set of digital signals and protocols. USB Logic Analyzer (8-ch, 24 MHz) This USB Logic Analyzer is an 8-channel logic analyzer with each input dual purposed for analog data recording. It is perfect for debugging and analyzing signals like I²C, UART, SPI, CAN and 1-Wire. It operates by sampling a digital input connected to a device under test (DUT) at a high sample rate. The connection to the PC is via USB. Specifications Channels 8 digital channels Maximum sampling rate 24 MHz Maximum input voltage 0 V ~ 5 V Operating temperature 0°C ~ 70°C Input impedance 1 MΩ || 10 pF Supported protocols I²C, SPI, UART, CAN, 1-Wire, etc. PC connection USB Dimensions 55 x 28 x 14 mm Downloads Software This bundle contains: New book 'Logic Analyzers in Practice' (normal price: €29.95) USB Logic Analyzer (8-ch, 24 MHz) (normal price: €12.95) USB Cable Jumper Wire Ribbon Cable
€ 42,95€ 34,95
Members identical