Search results for "red-pitaya and 1>1"
Red Pitaya STEMlab 125-14 (Starter Kit)
STEMlab 125-14 (originally Red Pitaya V1.1) is an open source measurement and control tool in size of a credit card (dimensions: 107 x 60 x 21 mm). It can replace many expensive laboratory measurement instruments. The STEMlab 125-14 unit is a network attached device based on Linux operating system. It includes Radio Frequency signal acquisition and generation technologies, FPGA, Digital Signal Processing and CPU processing. The STEMlab 125-14 unit is equipped with a Micro USB socket used for console connection, a microSD slot for microSD memory card, a RJ45 socket for Ethernet connection and a USB socket used for standard USB devices.Features:• High performance hardware at a surprising price tag.• Replaces most essential instruments: (Oscilloscope, Spectrum analyser, Signal generator, LCR meter)• LAN or wireless access from any WEB browser via tablet or a PC regardless of the OS (MAC, Linux, Windows, Android, iOS).• LabView and MATLAB® interface.• Possibility to make your own application and share it with others.• Open source software.RF inputs:• Number of channels: 2• Bandwidth: 50 MHz (3 dB)• Sample rate: 125 Msps• Input impedance: 1 MΩ / 10 pF• Connector: SMA-FRF outputs:• Number of channels: 2• Bandwidth: 50 MHz• Sample rate: 125 Msps• Load impedance: 50 Ω• Connector: SMA-FAuxiliary analog input channels:• Number of channels: 4• Nominal sampling rate: 100 ksps• ADC resolution: 14 bit• Input voltage range: 0 to +3.5 V• Input coupling: DC• Connector: IDC connectorAuxiliary analog output channels:• Number of channels: 4• Output type: Low pass filtered PWM• PWM time resolution: 4ns (1/250 MHz)• Output voltage range: 0 to +1.8 VDimensions: 107 x 60 x 21 mmKit contents:• 1x STEMlab 125-14 board• 1x micro USB power supply adaptor• 1x microSD card (4 GB) with pre-installed OS• 1x Ethernet cable (1 m)
€ 569,00€ 489,00
Members identical
Red Pitaya STEMlab 125-14 (Diagnostic Kit)
STEMlab 125-14 (originally Red Pitaya V1.1) is an open source measurement and control tool in size of a credit card (dimensions: 107 x 60 x 21 mm). It can replace many expensive laboratory measurement instruments. The STEMlab 125-14 unit is a network attached device based on Linux operating system. It includes Radio Frequency signal acquisition and generation technologies, FPGA, Digital Signal Processing and CPU processing. The STEMlab 125-14 unit is equipped with a Micro USB socket used for console connection, a microSD slot for microSD memory card, a RJ45 socket for Ethernet connection and a USB socket used for standard USB devices.Features High performance hardware at a surprising price tag. Replaces most essential instruments: (Oscilloscope, Spectrum analyser, Signal generator, LCR meter) LAN or wireless access from any WEB browser via tablet or a PC regardless of the OS (MAC, Linux, Windows, Android, iOS). LabView and MATLAB® interface. Possibility to make your own application and share it with others. Open source software. RF inputs Number of channels: 2 Bandwidth: 50 MHz (3 dB) Sample rate: 125 Msps Input impedance: 1 MΩ / 10 pF Connector: SMA-F RF outputs Number of channels: 2 Bandwidth: 50 MHz Sample rate: 125 Msps Load impedance: 50 Ω Connector: SMA-F Auxiliary analog input channels Number of channels: 4 Nominal sampling rate: 100 ksps ADC resolution: 14 bit Input voltage range: 0 to +3.5 V Input coupling: DC Connector: IDC connector Auxiliary analog output channels Number of channels: 4 Output type: Low pass filtered PWM PWM time resolution: 4ns (1/250 MHz) Output voltage range: 0 to +1.8 V Dimensions: 107 x 60 x 21 mmKit contents 1x STEMlab 125-14 board 1x Aluminium case 1x micro USB power supply adaptor 1x microSD card (4 GB) with pre-installed OS 1x Ethernet cable (1 m) 2x Osciloscope probes 2x SMA to BCN adapter 2x 50 ohm termination 2x SMA T adapter 1x WIFI dongle
€ 849,00€ 729,00
Members identical
Red Pitaya STEMlab 125-14 (Calibrated Diagnostic Kit)
STEMlab 125-14 (originally Red Pitaya V1.1) is an open source measurement and control tool in size of a credit card (dimensions: 107 x 60 x 21 mm). It can replace many expensive laboratory measurement instruments. The STEMlab 125-14 unit is a network attached device based on Linux operating system. It includes Radio Frequency signal acquisition and generation technologies, FPGA, Digital Signal Processing and CPU processing. The STEMlab 125-14 unit is equipped with a Micro USB socket used for console connection, a microSD slot for microSD memory card, a RJ45 socket for Ethernet connection and a USB socket used for standard USB devices.Features:• High performance hardware at a surprising price tag.• Replaces most essential instruments: (Oscilloscope, Spectrum analyser, Signal generator, LCR meter)• LAN or wireless access from any WEB browser via tablet or a PC regardless of the OS (MAC, Linux, Windows, Android, iOS).• LabView and MATLAB® interface.• Possibility to make your own application and share it with others.• Open source software.RF inputs:• Number of channels: 2• Bandwidth: 50 MHz (3 dB)• Sample rate: 125 Msps• Input impedance: 1 MΩ / 10 pF• Connector: SMA-FRF outputs:• Number of channels: 2• Bandwidth: 50 MHz• Sample rate: 125 Msps• Load impedance: 50 Ω• Connector: SMA-FAuxiliary analog input channels:• Number of channels: 4• Nominal sampling rate: 100 ksps• ADC resolution: 14 bit• Input voltage range: 0 to +3.5 V• Input coupling: DC• Connector: IDC connectorAuxiliary analog output channels:• Number of channels: 4• Output type: Low pass filtered PWM• PWM time resolution: 4ns (1/250 MHz)• Output voltage range: 0 to +1.8 VDimensions: 107 x 60 x 21 mmCalibration:Calibration is performed in noise controlled environment. Inputs and outputs gains are calibrated with 0.02 % and 0.003 % DC reference voltage standards. Input gains calibration is performed in medium size timebase range. STEMlab 125-14 is non-shielded device and its inputs/outputs ground is not connected to the earth grounding as it is in case of classical Oscilloscopes. To achieve calibration results given below, STEMlab 125-14 must be grounded and shielded. Inputs LV settings (+/- 1 V range) LV settings (+/- 1 V range) DC gain accuracy @ 122 kS/s DC offset @ 122 kS/s DC gain accuracy @ 122 kS/s DC offset @ 122 kS/s 0.2 % +/- 0.5 mV 0.4 % +/- 2 mV Outputs DC offset DC gain accuracy Ripple @ 0.5V DC +/- 4 mV 0.4 % 0.4 mVpp Kit contents:• 1x STEMlab 125-14 board with calibrated Inputs and Outputs• 1x Aluminium case• 1x micro USB power supply adaptor• 1x microSD card (4 GB) with pre-installed OS• 1x Ethernet cable (1 m)• 2x Osciloscope probes• 2x SMA to BCN adapter• 2x 50 ohm termination• 2x SMA T adapter• 1x WIFI dongle
€ 999,00€ 899,00
Members identical
JOY-iT StromPi 3 - Power Solution for Single Board Computers
With the StromPi 3, JOY-iT has now released the next expansion board that's going to meet your power requirements. With a voltage range of 6-61 V and a current of up to 3 A, even larger projects can be supplied with sufficient current. The individual inputs can now be prioritised in various ways, allowing the StromPi 3 to be perfectly customised to your project. In addition to the voltage inputs already available, the new StromPi 3 can now be supplemented with an optional plug-in battery unit that adds a rechargeable emergency power source to your Raspberry Pi with a LiFePO4 battery. As a result, unexpected power outages are in the past! Along with that, the StromPi 3 now has its own configurable and autonomously acting microsystem unit, which can be used for a programmable start-stop behaviour. Let your system run up and down at preset times to perform measurements or to switch devices on and off (also ideal for digital signage or machine control). The RTC (real-time clock) contained in the microsystem can also be used to synchronize the operating Raspberry Pi without Internet access. With the new StromPi 3 you are perfectly equipped for all kinds of projects! Specifications Voltage Input Micro-USB, Wide-Range: 6-61 V Voltage Output 5 V, 3 A / RPi-PinHeader + USB Compatible to Raspberry Pi (A+, B+, 2B, 3, 3B, 3B+, 4B), Banana Pi M2, via USB output: many more single board computers like Arduino, pcDuino, Red Pitaya and many more Optional Extensions Plug-in battery pack (sold separately) with a 1000 mAh LiFePO4 battery unit Microcontroller Control Programming option by prioritizing the individual inputs in an emergency (Power Path) Addional Features RTC real-time clock (programmable start/stop behaviour), control via serial interface (data output, control), optional rechargeable battery is charged immediately during operation Dimensions 55 x 54 x 20 mm Downloads Manuals, scripts and firmware
€ 69,95
Members € 62,96