Search results for "protection a"
PeakTech PeakTech 6225 A DC Power Supply (30 V, 5 A)
This switching mode power supply is ideal of its very handy shape and low weight for applications in the development and education area. The high visibility of the display, the easy operation and low weight, as well as the slim design are excellent conditions for use in education and service area. Blue LED display to show the output voltage – and current values High effiency >85% Low ripple & noise Protection against short circuit, overload and over-temperature Adjustable voltage range: 0 ~ 30 V Safety: EN 61010-1 Accessories: Power cable and manual Technical Specifications Output voltage (fixed) 0 ~ 30 V DC Output current 0 ~ 5 A DC Ripple & noise ≤ 3 mV RMS; ; ≤ 3 mA RMS Load regulation ≤ 0.01% + 5 mV Line regulation ≤ 0.01% + 1 mV Display accuracy +/- 0,1% + 2 dgt. Protection Overload, overtemperature, short circuit protections by constant current circuitry and output overvoltage Operating voltage 110 ~ 240 V AC; 50/60 Hz Dimensions (WxHxD) 78 x 160 x 255 mm Weight 2.6 kg
€ 89,95
Members € 80,96
PeakTech PeakTech 6080 A DC Power Supply (15 V, 3 A)
Due to the linear technology used, this model does not generate any high-frequency interference, and a safety transformer, according to EN-61558-2-6, was also used, which outputs a safety extra-low voltage (SELV) to ensure maximum user safety. This power supply, with its modern design, was specially designed for the service and education sector and convinced with its excellent price/performance ratio. Linear regulated DC laboratory power supply unit Overload protection and short-circuit proof 4-digit blue digital display for current and voltage 4 mm safety sockets Passive cooling / fanless housing design Safety transformer for SELV according to EN-61558-2-6 Safety: EN-61010-1 Accessories: Power cord and operating instructions
€ 84,95
Members € 76,46
PCWork PCW07D Laboratory Switching Power Supply (DC 0-50 V, 0-6 A)
The PCW07D laboratory power supply is a high quality DC switching power supply designed specifically for laboratory applications. With an output voltage of 0-50 V and an output current of 0-6 A, it offers a maximum power of 150 W to handle even the most demanding tasks. Whether you are a student working on projects or a professional user who needs precise results, this power supply will meet your needs. Stable and accurate output for precise measurements and experiments The PCW07D laboratory power supply features stable and precise output. Thanks to innovative technology, it delivers a constant voltage or current regardless of load changes or fluctuating input voltages. This stability ensures accurate measurements and precise experiments. The power supply has high setting accuracy, so you can target your desired values. Intuitive operation and convenient functions The PCW07D laboratory power supply offers you intuitive operation and practical functions. The large, 4-digit LED display makes it easy to read the set values. The 3 memory buttons allow you to save your favorite settings and recall them at any time. The ability to set over-voltage and over-current protection functions provides additional safety. The innovative design of the laboratory power supply is not only visually impressive, but also offers practical advantages. The compact dimensions allow space-saving installation in the laboratory. The USB interface allows you to connect to other devices and the lock function provides additional protection against unauthorized operation. In addition, the power supply features short-circuit, overload, overheat and current-limit protection to keep your equipment and applications safe. Specifications Regulated output voltage 0-50 V Regulated output current 0-6 A (max output 150 W) Input voltage 104~127 V AC (60 Hz)207~253 V AC (50 Hz) Line regulation CV ≤0.1% +3 mV CC ≤0.2% +3 mA Load regulation CV ≤0.1% +3 mV CC ≤0.5% +10 mA Ripple and noise CV ≤5 mVr.m.s CC ≤20 mAr.m.s Protection Current limiting and short-circuit protection, over current protection, over voltage protection Voltage indication accuracy LED ±0.5% +5 digits Current indication accuracy LED ±0.5% +5 digits Environment 0~+40°C relative humidity <90%
€ 124,95€ 104,95
Members identical
PeakTech PeakTech 6226 Laboratory Switching Mode Power Supply DC (0-30 V, 0-10 A)
Blue LED display to show the output voltage - and current values Adjustable voltage range: 0 ~ 30 V; Current range: 0 ~ 10 A Voltage and current pre-selection with switchable output C.C. (Constant Current) and C.V. (Constant Voltage) mode with connected load Protection against short circuit, overload and overtemperature Automatic shutdown at short circuit as protection Safety: EN 61010-1 Accessories: Power cable and manual Output Voltage 0 V ~ 30 V DC Output Current 0 A ~ 10 A DC Output Power 300 W Display Voltage 10 mV (0 to 30V) Display Current 1 mA (0 A to 9.9 A) ; 10 mA (from 10 A) Ripple & noise ≤ 10 mV RMS; ; ≤ 10 mA RMS Load regulation ≤ 0.02% + 5 mV Line regulation ≤ 0.02% + 10 mV Display accuracy +/- 0.5% + 5 dgt. Protection Overload, overtemperature, short circuit protections by constant current circuitry and output overvoltage Operating voltage 115 / 240 V AC; 50 / 60 Hz Dimensions 80 x 160 x 260 mm Weight 1.6 kg For more information, check out the User Manual here.
€ 149,95
Members € 134,96
PeakTech PeakTech 1525 DC Power Supply (16 V, 40 A)
This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit designs allow units to have small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The dual action (coarse and fine set) control knobs make tuning the voltage and current level ever so smooth, precise and fast, due to the rotary encoder and microprocessor control. Setting the CC current limiting can be done in open circuit at output poles. The three user defined presets of voltage and current limiting levels facilitate quick access to frequently used Volt/Ampere settings. The full remote control functionality offer a wide range of operation possibilities for the industrial and more sophisticated users. High RFI immunity and excellent EMI Over load, Over Temperature and Tracking Over Voltage protections 3 user defined, recallable settings for voltage and current values Full Remote control of voltage and current and output control on and off Isolated ground, Active PFC and high power efficiency, Intelligent fans control from zero to full speed Rotary Encoder Control Knob with coarse and fine tuning Safety: EN 61010-1, EN 60950-1 Accessories: power cable and manual Display 3-digit 15 mm green LED-display Output voltage 1 ~ 16 V DC adjustable Output current 40 A / 5 A (main output (rear panel) / front output) Output power 640 W Residual ripple 5 mV rms Efficiency > 85,5 % Operation voltage 200 ~ 240 V AC; 50/60 Hz Dimension (WxHxD) 200 x 90 x 255 mm Weight 2.6 kg
€ 349,00
Members € 314,10
PeakTech PeakTech 6227 DC Switching Power Supply (0-60 V, 0-6 A) with colour LCD & 2x USB
This laboratory power supply offers a controllable 0...60 V or 0...6 A DC main output with a maximum continuous power of 150 W. For developers, this laboratory power supply offers two switchable USB outputs with their own LCD display with voltage and current values.If you use a load up to 2.5 A, you can set the output voltage up to 60 V. If you want to use a higher current up to 6 A, set the load to a maximum of 25 V. Of course, all stages are also adjustable in between, e.g. 30 V/5 A, 40 V/3.7 A or 50 V/3 A.The current and voltage setting also can be done when the output is switched off. By pressing the knob for current or voltage, the setting resolution can be fine/coarse switched from 1 mA to 100 mA or 10 mV to 1 V.Due to the high range of functions and the simple operation with the best price-performance ratio, this laboratory power supply is ideal for the education, hobby, development and service sector. Blue LCD display showing the output voltage and current values Green LCD display showing the USB output voltage and current values 150 W constant output power Adjustable voltage range: 0~60 V at 0~2.5 A and 0~25 V at 2.5~6 A Voltage and current pre-selection with switchable output C.C. (Constant Current) and C.V. (Constant Voltage) mode with connected load Protection against short circuit, overload and overtemperature Accessories: Power cable, Connection Leads and Manual Output Voltage 0 ~ 60 V DC (@2,5 A) Output Current 0 ~ 6 A DC (@ 25 V) Output Power 150 W Display Resolution (V) 10 mV Display Resolution (A) 1 mA Setting Resolution (V) 10 mV / 1 V switchable Setting Resolution (A) 1 mA / 100 mA switchable Ripple & noise ≤ 5 mV RMS; ≤ 20 mA RMS Load regulation ≤ 0.05% + 5 mV, ≤ 0.5% + 5 mA Line regulation ≤ 0.1% + 3 mV, ≤ 0.2% + 3 mA Display accuracy +/- 0,5% + 5 dgt. Protection Overload, overtemperature, short circuit Operating voltage 115 / 240 V AC; 50/60 Hz Dimensions (WxHxD) 80 x 160 x 260 mm Weight 1.6 kg
€ 129,95
Members € 116,96
SK Pang Electronics PiCAN 3 - CAN-Bus Board for Raspberry Pi 4 with 3 A SMPS & RTC
Features CAN v2.0B at 1 Mb/s High speed SPI Interface (10 MHz) Standard and extended data and remote frames CAN connection via standard 9-way sub-D connector or screw terminal Compatible with OBDII cable Solder bridge to set different configuration for DB9 connector 120 Ω terminator ready Serial LCD ready LED indicator Foot print for two mini push buttons Four fixing holes, comply with Pi Hat standard SocketCAN driver, appears as can0 to application Interrupt RX on GPIO25 5 V/3 A SMPS to power Raspberr Pi and accessories from DB9 or screw terminalo Reverse polarity protectiono High efficiency switch mode designo 6 V to 20 V input range RTC with battery backup (battery not included, requires CR1225 cell) Downloads User guide Schematic Driver installation Writing your own program in Python Python3 examples
€ 89,95
Members € 80,96
SK Pang Electronics PiCAN 2 Duo - CAN-Bus Board for Raspberry Pi 4 with 3 A SMPS
This PiCAN2 Duo board provide two independent CAN-Bus channels for the Raspberry Pi 4. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. Connections are made via 4 way screw terminal. This board has a 5 V, 3 A SMPS that can power the RPi is well via the screw terminal. Easy to install SocketCAN driver. Programming can be done in C or Python. Features CAN v2.0B at 1 Mb/s High speed SPI Interface (10 MHz) Standard and extended data and remote frames CAN connection screw terminal 120Ω terminator ready Serial LCD ready LED indicator Four fixing holes, comply with Pi Hat standard SocketCAN driver, appears as can0 and can1 to application Interrupt RX on GPIO25 and GPIO24 5 V, 3 A SMPS to power Raspberry Pi and accessories from screw terminal Reverse polarity protection High efficiency switch mode design 7 V to 24 V input range Downloads User guide Schematic Rev D Writing your own program in Python Python3 examples in Github
€ 99,95
Members € 89,96
iFixit iFixit Pro Tech Toolkit
High-Performance Toolkit for DIY Repairs The perfect toolkit for pros to average joes. Contains all the poking, prying, gripping, lifting, ESD safety, and screw driving tools needed to service consumer electronics. Completely re-engineered to provide all the tools that you need, and none that you don't. Kit Contents Anti-Static Wrist Strap - protection for circuits against static electricity Small Suction Handle - suction handle for holding onto things lacking handles 3x iFixit Opening Tool - soft plastic prying tools 6x iFixit Opening Picks - thin prying tool for opening electronic devices Nylon Tipped Reverse Tweezers - to elevate and hold your work Angled ESD Tweezers - ESD-safe, feature teeth for tougher grip Blunt ESD Tweezers - ESD-safe, feature teeth for tougher grip Standard Spudger - tough antistatic tool for a variety of purposes Halberd Spudger - features a hook for scooping, scraping, pulling, and guiding.ESD-safe. Metal Spudger - for more powerful prying, scraping, probing, and poking action Jimmy - handy tool for 'Jimmy'ing open electronics. Magnetic Pad - Holds tiny screws and parts during repairs Tool Roll - Durable and compact Mako Precision Bit Set - all the bits needed for repairs on small electronics Mako Precision Bit Set Includes 64 Bit Driver 150 mm Flex Extension 4 mm Screwdriver Bits Phillips - 000, 00, 0, 1, 2 Flathead - 1, 1.5, 2, 2.5, 3, 4 mm Torx - T2, T3, T4, T5 Torx Security - TR6, TR7, TR8, TR9, TR10, TR15, TR20, TR25 Pentalobe - P2, P5, P6 JIS - J000, J00, J0, J1 Hex - 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5 mm Tri-point - Y000, Y00, Y0, Y1 Nut Driver - 2.5, 3, 3.5, 4, 4.5, 5, 5.5 mm Square - 1, 2 Gamebit - 3.8, 4.5 mm Spanner - 6, 8 Triangle - 2, 3 mm Standoff Bit for iPhone Oval Bit Magnetic Pickup Bit SIM Eject Bit 1/4' to 4 mm Driver Adapter
€ 69,95
Members € 62,96
Upgraded T-962 Infrared Reflow Oven (Elektor Version)
This upgraded version (available exclusively from Elektor) contains the following improvements: Enhanced protective earthing (PE) for furnace chassis Extra thermal insulation layer around furnace to reduce odors The infrared IC heater T-962 is a microprocessor-controlled reflow oven that you can use for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed. A windowed drawer is designed to hold the work-piece, and allows safe soldering techniques and the manipulation of SMDBGA and other small electronic parts mounted on a PCB assembly. The T-962 may be used to automatically rework solder to correct bad solder joints, remove / replace bad components and complete small engineering models or prototypes. Features Large infrared soldering area Effective soldering area: 180 x 235 mm; this increases the usage range of this machine drastically and makes it an economical investment. Choice of different soldering cycles Parameters of eight soldering cycles are pre defined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down. Special heat up and temperature equalization with all designs Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder. Ergonomic design, practical and easily operated Good build quality but at the same time light weight and a small footprint allows the T-962 to be easily bench positioned transported or stored. Large number of available funtions The T-962 can solder most small parts of PCB boards, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production. Specifications Max. soldering area 180 x 235 mm (7.1 x 9.3') Rated power 800 W Processing time 1~8 minutes Power supply 220 V AC/60 Hz Dimensions 31 x 29 x 17 cm (12.2 x 11.4 x 6.7') Weight 6.2 kg Downloads Manual GitHub
€ 279,00€ 239,00
Members identical
Quick 861DW Hot Air Rework Station (1000 W)
The Quick 861DW is an advanced Hot Air Rework Station with a 1000 W heating power. It is designed for professional soldering electronic SMD components using lead-free solders. Features Three programmable channels CH1, CH2 and CH3 (for air volume and temperature parameters). Password protection and button lock function available. Magnetic switch in a stand can automatically puts the station into sleep mode when not in use. Easy real-time operation, auto sleeping function available, parameters can be set in sleeping mode. Closed loop sensor, temperature controlled by micro-computer zero trigger, large power, rapid temperature rising, temperature can be easily and accurately adjusted, not affected by airflow. Brushless vortex fan, wide range of airflow adjustable, suitable for many applications. Auto cooling function available, long lifetime ceramic heater. Specifications Power 1000 W Operating voltage AC 200~240 V Temperature range 100-500°C Air volume 1-120 class Air flow 50 l/min (Max) Dimensions 188 x 245 x 135 mm Weight 3.65 kg Downloads Manual
€ 349,00
Members € 314,10
FNIRSI FNIRSI DPOX180H (2-in-1) 2-ch Digital Phosphor Oscilloscope (180 MHz) & Signal Generator
The FNIRSI DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500 MS/s and an analog bandwidth of 180 MHz. The measurement results are displayed on the high-contrast 2.8-inch IPS full-view LCD screen with digital fluorescence technology. Features 2-ch handheld oscilloscope & DDS signal generator 180 MHz bandwidth 500 MS/s sampling rate 20 MHz signal generator Innovative digital trigger system Cursor measurement function 5 mV sensitivity 50000 wfm/s waveform refresh rate 2.8' IPS full-vision high-definition display Built-in 4.2 V/3000 mAh lithium battery Automatic shutdown setting High-voltage anti-burning protection Specifications Nummer of channels 2 Analog bandwidth 180 MHz Maximum sampling rate 500 MS/s Input coupling DC/AC Rise time 2.5s Storage depth 120 Kpts Input impedance 1 MQ-18 PF Vertical sensitivity 5 mV-10 V (1X) Time base range 5 nS~50 S DC accuracy ±2% Time accuracy +0.01% Trigger detection Digital trigger Trigger mode Auto/Single/Normal Trigger edge Rising/Falling Measurement range 40 mV~80 V (1X) Screenshot storage 90 Capture signal 500 Screen size 2.8 inch Screen resolution 320 x 240 Display technology IPS full view Expansion interface USB transmission interface Auto power off 5 minutes - 2 hours Firmware upgrade Supported iso image upgrade Charging requirements 5 V/2 A Battery capacity 3000 mAh Standby time 3.5 hours at full charge Signal Generator 14 standard function signals Waveform storage 250 groups Parameter measurement 12 kinds Dimensions 135 x 90 x 40 mm Digital Phosphor Oscilloscope FNIRSI DPOX180H Oscilloscope uses the latest digital phosphor technology to overcome the traditional oscilloscope due to noise caused by the waveform burr feeling. Color temperature display function can more clearly see the distribution of the signal, probability characteristics and the rise and fall time of the step signal fast and slow. X-Y mode with digital phosphor technology for comparison of amplitude, frequency and phase of two groups of signals. DDS Function Signal Generator Built-in 20 MHz DDS function signal generator, with 14 kinds of standard function signals, output amplitude fixed at 1 VPP, sine wave frequency of 20 MHz, other waveform frequency of 10 MHz, adjustable frequency step of 1 Hz. Contains the original chopping technology, intercept part of the oscilloscope measurement of complex signals as the output signal of the signal generator, than the traditional signal generator hand-drawn signal more objective and realistic. Included 1x FNIRSI DPOX180H phosphor oscilloscope 2x Probes (200 MHz) 1x USB power supply 1x USB cable 1x Manual Downloads Manual Firmware V40
€ 159,95
Members € 143,96