Search results for "peak level"
Peak Peak Atlas ESR70 Gold - Low Resistance and Capacitance Meter
The Peak Atlas ESR70 Gold is an enhanced version of the previous Peak Atlas ESR70 Plus. It does everything that the ESR70 Plus did but better. It now measures capacitance up to 10x faster, and over a wider range, thanks to new test algorithms. The capacitance measurement is also much less influenced by parallel resistances or leakage current thanks to our new Triple-Slope measurement system. Using the supplied gold plated probes (removable), the Atlas ESR70 Gold can measure ESR down to a resolution of 0.01 ohms, up to 40 ohms. It can even measure ESR for capacitors that are in-circuit. Probes are removable, allowing 2 mm compatible probes to be fitted. Audible alerts are produced for various ESR levels allowing you to perform many tests in succession without having to look at the display. The ESR70 automatically takes capacitive reactance into account, so even low value capacitors (down to 0.3 uF) can have the ESR measured accurately. Features Uses a single AAA Alkaline cell (included). Alphanumeric LCD with backlight. Automatic analysis-start when you apply the probes. Automatic capacitor discharge using controlled discharge function. ESR (and low DC resistance) measurement (even in-circuit). Capacitive reactance automatically taken into account to ensure accurate ESR. Capacitance measurement (if testing out-of-circuit). Audible alerts for various ESR levels. Extended ESR measurement range up to 40 Ohms. Optional probe alternatives easily fitted. New Gold Features Improved LCD with better backlight. 10x faster capacitance measurement for large capacitors. Enhanced user options system. New triple-slope measurement system to vastly reduce the influence of parallel resistance and/or leakage current on capacitance measurements. Much wider capacitance measurement range now 0.3 uF to 90,000 uF (was 1uF to 22,000uF). Specifications Analyser type ESR and Capacitance Component types Capacitors (>0.3 uF) ESR range 0.00 Ohms to 40.0 Ohms ESR resolution From 0.01 Ohms In-circuit use ESR only Capacitance range 0.3 uF to 90000 uF Battery type 1.5 V Alkaline AAA Cell (supplied). Life typically 1500 ops Display type Alphanumeric LCD (with backlight) Included ESR70 Equivalent Series Resistance Meter Extra-long and extra-flexible test cables (450 mm of Silicone covered cable) 2 mm gold plated plugs and sockets with removeable gold plated crocodile clips Comprehensive illustrated user guide AAA Alkaline cell Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (IT)
€ 99,95
Members € 89,96
OWON OWON XSA810 Spectrum Analyser (9 kHz - 1 GHz)
The OWON XSA810-TG 9 kHz-1 GHz is a cost-effective spectrum analyzer with a tracking generator included and a frequency resolution of 1 Hz. Specifications Frequency Frequency Range 9 kHz to 1 GHz Frequency Resolution 1 Hz Frequency Span Range 0 Hz, 100 Hz to the max. frequency range Aging Rate Frequency Counter Resolution 1 Hz, 10 Hz, 100 Hz, 1 kHz Resolution Bandwidth (-3 dB) 1 Hz to 1 MHz @ 1 - 10 step, 1 MHz, 3 MHz Video Bandwidth (-3 dB) 1 Hz to 1 MHz Phase Noise (20 ℃ to 30 ℃, c = 1 GHz) Phase noise Level Unit dBm, dBuW, dBpW, dBmV, dBuV, W, V Trace Detectors positive-peak, negative-peak, sample, normal, RMS, average, quasi-peak Trace Functions clear write, max hold, min hold, view, blank, average, trace math VSWR 300 kHz to 1.5 GHz when input > 10 dB nominal when input Display 9" 1280x800 pixels TFT LCD Communication Interface USB host, USB device, LAN, earphone port, HDMI
€ 899,00
Members € 809,10
OWON OWON XSA1015-TG Spectrum Analyser (9 kHz - 1.5 GHz)
The OWON XSA1015-TG Spectrum Analyzer offers a variety of features that will make it an indispensable part of your lab. Features Frequency Range from 9 kHz up to 1.5 GHz 150 dBm Displayed Average Noise Level Phase Noise -82dBc/Hz @1 Gz and offset at 10 KHz Total Amplitude Accuracy <1.5dB 10 Hz Minimum Resolution Bandwidth (RBW) EMI Pre-compliance Test Kit 1.5 GHz Tracking Generator Kit 10.4 inches display Specifications Frequency Specification Frequency Range 9kHz - 1.5 GHz Resolution 1Hz Frequency span Range 0 Hz, 100 Hz to maximum frequency of device Accuracy ± span /(swept points -1) Internal reference Reference frequency 10.000000 MHz Temperature stability < 2.5 ppm (15 ℃ to 35 ℃) Aging rate < 1 ppm / year Bandwidth Resolution bandwidth (-3 dB) 10 Hz to 500 kHz (in 1 to 10 sequence), 1 MHz, 3 MHz Video bandwidth (-3 dB) 10 Hz to 3 MHz Amplitude Specification Displayed average noise level(DANL) Input attenuation 0 dB,1Hz resolution bandwidth Preamp off 1 MHz ~ 10 MHz - 140 dBm(nominated)10 MHz ~ 1GHz - 140 dBm(nominated)1 GHz ~ 1.5 GHz - 138 dBm (nominated) Preamp on <-82 dBc / Hz @ 10 kHz offset<-100 dBc / Hz @ 100 kHz offset<-110 dBc / Hz @ 1 MHz offset Level display range Log scale coordinate 1 dB ~ 255 dB Linear scale coordinate 0 to reference level level unit dBm, dBuW, dBpW, dBmV, dBuV, W, V Points 201 ~ 1001 Number of traces 5 Detectors Positive-peak, negative-peak, sample, normal, RMS Trace functions Clear write, Max Hold, Min Hold, View, Blank, Average Accuracy Input Attenuation Switching Uncertainty 20℃ ~ 30℃, fc=50 MHz, Preamplifier Off, 20dB RF attenuation, input signal 0~39 dB±0.5 dB Absolute Amplitude Uncertainty 20℃ ~ 30℃, fc=50 MHz, RBW=1 kHz, VBW=1 kHz, peak detector, 20 dB RF attenuationPreamplifier Off ±0.4 dB, input signal= -20 dBmPreamplifier On ±0.5 dB, input signal= -40 dBm Uncertainty input signal range 0 dbm ~ -50 dbm±1.5 dB VSWR input 10 dB RF attenuation,1 MHz ~ 1.5GHz<1.5, nominal Tracking generator Output frequency range 100 kHz ~ 1.5 GHz Output power level range -30 dBm ~ 0 dBm Output power level resolution 1dB Output flatness +/-3 dB Maximum safe reverse level Average total power: 30 dBm, DC: ±50 VDC Inputs and Outputs Front panel RF input connector 50 Ω,N-type female Front panel track generator output 50 Ω,N-type female 10 M reference input 50 Ω,N-type female Communication port USB Host, USB Device, LAN, earphone port, and VGA General technical specification Display TFT LCD, 10.4 inches Weight 5.0 kg Dimension (W x H x D) 421 x 221 x 115 mm Downloads User manual Quick guide Datasheet PC software
€ 1.349,00
Members € 1.214,10
LabNation LabNation SmartScope USB Oscilloscope
Smartscope is the only scope in the world that runs on all major platforms: Windows, macOS, Linux, Android and iOS (with WiFi bridge). Connect the SmartScope to pretty much any device! Even more, you can get mobile with it: take the SmartScope on the road, thanks to the single-cable connectivity. Everything is going to be intuitive: pointing, pinching and swiping finally replaces the clunky interfaces of old scopes. With the SmartScope you develop your digital interfaces using the 100 MS/s logic analyzer. With this tool you can design any signal you want using Excel, then upload it to the built-in Arbitrary Waveform Generator (AWG). At the end capture the voltage at any point of your design at 100 million times each second. The Software for the support of Windows / macOS) / Linux / Android and Export formats (Excel .csv / Matlab .mat) are given. Features Channel sampled at 100 MHz/s each AC/DC coupling on analog inputs 100% silent 64 Mbit RAM: x10000 zoom Arbitrary Waveform Generator 8 digital inputs at 100 MS/s each 4 digital outputs at 100 MS/s each Externally power your scope in case your mobile can't supply the juice. Specifications Oscilloscope Bandwidth 30 MHz (-3 dB point) Sample rate 2x 100 MS/s Channels 2 Max pre-trigger position 16x full scale Max post-trigger position Full scale Max full voltage scale 10 V/div (±35 V input range) Min full voltage scale 20 mV/div Analog input range -35 V, +35 V Max input peak-to-peak 40 V Signal coupling AC / DC Precision 8 bit Input impedance 1 MΩ // 10 pF Waverforms 200 waveforms/s Data delay to host Sample depth Up to 4 million samples per channel External trigger Yes Logic Analyzer Input channels 8 Input impedance 100 kOhm // 2 pF to GND Sample rate 100 MS/s Logic level 1.8 V to 5.0 V Diode protection Bidirectional Input data buffer 4 million samples Waverforms 200 waveforms/s Data delay to host Protocol decoders I²C, SPI, UART, I²S integrated User extensible Wave Generator (Analog Output) Output channels 1 Data rate Up to 50 MS/s Output level 0-3.3 V (Opamp driven) Output buffer Up to 2048 samples Max slew rate 30 ns/V Step 13 mV Wave Generator (Digital Output) Channels 4 Data rate Up to 100 MS/s Output level 3.3 V or 5 V (selectable) Output buffer Up to 2048 samples Diode protected Yes Programmable Logic USB controller MicroChip PIC18F14K50 USB interface PicKit3 or USB flashable FPGA Xilinx Spartan 6 FPGA interface JTAG and USB flashable Size & Weight Dimensions (L x W x D) 4.33 x 2.52 x 0.95" (110 x 64 x 24.2 mm) Weight 158 g Case Aluminium Connectivity Device/Host mini USB included Record waveforms Store Matlab (.mat) or Excel (.csv) files through Dropbox Analog BNC 2 probes included Digital 8x 0.1" pitch, probes (included) Sync USB micro B-B Power USB micro B (optional) Included 1x SmartScope USB Oscilloscope 2x Analog probes 1x Digital probe cable 1x Mini-B USB cable Downloads User manual Software GitHub Wiki
€ 239,00€ 149,95
Members identical
Siglent Siglent SSA3032X Plus Spectrum Analyzer (9 kHz - 3.2 GHz)
The Siglent SSA3032X Plus spectrum analyzer is a powerful and flexible tool for RF signal and network analysis. With a frequency range of 3.2 GHz, the analyzer delivers reliable automatic measurements and multiple modes of operation: spectrum analyzer the base, optional functions include RF power measurement, vector signal modulation analysis, reflection measurement, and EMI test. Applications include broadcast monitoring/evaluation, site surveying, S-parameter measurement, analog/digital modulation analysis, EMI pre-compliance test, research and development, education, production, and maintenance. Features Spectrum Analyzer Frequency Range from 9 kHz to 3.2 GHz –161 dBm/Hz Displayed Average Noise Level (Typ.) –98 dBc/Hz. @ 10 kHz Offset Phase Noise (1 GHz, Typ.) Level Measurement Uncertainty 1 Hz Minimum Resolution Bandwidth (RBW) Preamplifier (Std.) Tracking Generator (incl. free of charge) Analog and Digital Signal Modulation Analysis Mode (opt.) Reflection Measurement Kit (opt.) EMI Filter and Quasi-Peak Detector Kit (opt.) Advanced Measurement Kit (opt.) 10.1-inch Multi-Touch Screen , Mouse and Keyboard supported Web Browser Remote Control on PC and Mobile Terminals and File Operation Specifications SSA3015X Plus SSA3021X Plus SSA3032X Plus SSA3075X Plus Frequency Range 9 kHz ~ 1.5 GHz 9 kHz ~ 2.1 GHz 9 kHz ~ 3.2 GHz 9 kHz ~ 7.5 GHz Resolution Bandwidth 1 Hz ~ 1 MHz 1 Hz ~ 1 MHz 1 Hz ~ 1 MHz 1 Hz ~ 3 MHz Phase Noise Total Amplitude Accuracy Display Average Noise Level –156 dBm/Hz –161 dBm/Hz –161 dBm/Hz –165 dBm/Hz Included Siglent SSA3032X Plus spectrum analyzer USB cable Power cord Quick start guide Downloads Datasheet Manual Documentation Firmware
€ 2.949,00
Members identical
Siglent Siglent SSA3015X Plus Spectrum Analyzer (9 kHz - 1.5 GHz)
The Siglent SSA3015X Plus spectrum analyzer is a powerful and flexible tool for RF signal and network analysis. With a frequency range of 1.5 GHz, the analyzer delivers reliable automatic measurements and multiple modes of operation: spectrum analyzer the base, optional functions include RF power measurement, vector signal modulation analysis, reflection measurement, and EMI test. Applications include broadcast monitoring/evaluation, site surveying, S-parameter measurement, analog/digital modulation analysis, EMI pre-compliance test, research and development, education, production, and maintenance. Features Spectrum Analyzer Frequency Range from 9 kHz to 1.5 GHz –156 dBm/Hz Displayed Average Noise Level (Typ.) –99 dBc/Hz. @ 10 kHz Offset Phase Noise (1 GHz, Typ.) Level Measurement Uncertainty 1 Hz Minimum Resolution Bandwidth (RBW) Preamplifier (Std.) Tracking Generator (incl. free of charge) Analog and Digital Signal Modulation Analysis Mode (opt.) Reflection Measurement Kit (opt.) EMI Filter and Quasi-Peak Detector Kit (opt.) Advanced Measurement Kit (opt.) 10.1-inch Multi-Touch Screen , Mouse and Keyboard supported Web Browser Remote Control on PC and Mobile Terminals and File Operation Specifications SSA3015X Plus SSA3021X Plus SSA3032X Plus SSA3075X Plus Frequency Range 9 kHz ~ 1.5 GHz 9 kHz ~ 2.1 GHz 9 kHz ~ 3.2 GHz 9 kHz ~ 7.5 GHz Resolution Bandwidth 1 Hz ~ 1 MHz 1 Hz ~ 1 MHz 1 Hz ~ 1 MHz 1 Hz ~ 3 MHz Phase Noise Total Amplitude Accuracy Display Average Noise Level –156 dBm/Hz –161 dBm/Hz –161 dBm/Hz –165 dBm/Hz Included Siglent SSA3015X Plus spectrum analyzer USB cable Power cord Quick start guide Downloads Datasheet Manual Documentation Firmware
€ 1.399,00
Members identical
JOY-iT JOY-iT R301T Fingerprint Sensor
The R301T fingerprint sensor module is capable of image collection and algorithm calculation due to this integrated chip. Another remarkable function of the sensor is, that it can recognize the fingerprint in different conditions, for example humidity, light texture or changes of the skin. This offers a very wide range of possible applications to secure locks and doors among others. The chip can send data via UART, TTL serial and USB to the connected controller. Specifications Model JP2000 sensor Chip 32 Bit ARM Cortex-M3 Chip storage 96 kB RAM, 1 MB Flash Power supply 4.2 - 6.0 V Working current Typical: 40 mAPeak: 50 mA Logic level 3,3 / 5 V TTL Logic Fingerprint storage capacity 3000 Prints Matching mode 1:N Identification1:1 Verification Adjustable security level 1 - 5 levels(default security level: 3) False acceptance rate (on security level 3) False acceptance rate (on security level 3) Response time Pre-treatment: Match: Baud rate support 9600 - 921600 UART communication No parity, Stop Bit: 1 Dimensions 42 x 19 x 8 mm Included 1x Fingerprint sensor COM-FP-R301T 1x Cable Downloads • Datasheet Manual
€ 39,95
Members € 35,96
Seeed Studio Seeed Studio RF Explorer WSUB1G+ Slim
Features Internal LNA amplifier and selectable attenuator Low frequency support from 50KHz covering LF, MF, HF, VHF and UHF up to 960Mhz New HELP and SET buttons to improve user interface and configuration selection with 2-clicks Wide band coverage to all popular sub-1Ghz bands, including FM, TV and DTV, ISM, RFID, GSM, etc. Ideal choice for HAM bands from 160meters to 33cm Pocket size and light weight Solid metal case Spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes High capacity internal Lithium battery for 20hs+ of continuous run, rechargeable by USB Multi-platform Windows/Linux/MacOS Open Source software and API libraries Can be extended with internal Expansion Modules for additional band and functionality Specification Frequency band: 0.05 MHz - 960 MHz Frequency span: 0.1 MHz - 960 MHz Internal selectable LNA 25 dB gain Internal selectable Attenuator 30 dB Graphics LCD 128 x 64 pixels, great visibility outdoors Support included for Windows, Linux and MacOS X Backlight for great visibility indoor Internal Lithium Ion 1800mA/h rechargeable battery Standard SMA 50 Ω connector Wideband 144/433MHz dual band telescopic antenna included UHF 400-900 MHz rubber duck articulated antenna included Amplitude resolution: 0.5dBm Dynamic range: -125 dBm to 10 dBm Absolute Max input power: +30dBm Average noise level (typical LNA): -125 dBm Frequency stability and accuracy (typical): +-10 ppm Amplitude stability and accuracy (typical): +-2d Bm Frequency resolution: 1kHz Resolution bandwidth (RBW): automatic 2.6 kHz to 600 kHz Part List 1x Spectrum Analyzer 1x Mini USB cable 1x Dual band 144/430MHz Telescopic antenna 1x UHF 400-900Mhz antenna 1x EVA case
€ 194,95
Members € 175,46
Cytron Cytron 10Amp 5-30 V DC Motor Driver
DC brushed motors are the most commonly used and widely available motors in the market. The Cytron 10 Amp 5-30 V DC Motor Driver will help you add functionality to your DC motor. It supports both sign-magnitude PWM signal and locked-antiphase. It is compatible with full solid-state components resulting in higher response time and eliminates the wear and tear of the mechanical relay. Features Supports motor voltage from 5 V to 30 V DC Current up to 13 A continuous and 30 A peak 3.3 V and 5 V logic level input Compatible with Arduino and Raspberry Pi Speed control PWM frequency up to 20 kHz Fully NMOS H-Bridge for better efficiency No heat sink is required Bi-directional control for one Brushed DC motor Regenerative Braking Downloads User Manual Arduino Library
€ 17,95
Members € 16,16
JOY-iT JOY-iT Mega 2560 Pro
This JOY-iT microcontroller board opens the world of programming to you and offers you the same computing power as the Mega 2560, but with a smaller foot-print. It also has many more connectors than comparable boards (Arduino Uno). It is powered by the Arduino IDE and power can be supplied either via the USB port or the VIN pins. This allows you to use it safely with many other devices, e.g. desktop PC. Therefore the Mega 2560 Pro is highly integrable. Features Microcontroller ATmega2560 - 16AU Storage Flash 256 KB, SRAM 8 KB, EEPRom 4 KB Amount of Pins:Digital I/OPWM OutputAnalog Input 541516 Compatible with Arduino, Desktop PCs, etc. Special features USB Port or Power Pins for power supply Interface converter Micro USB to USB UART Size 55 x 38 mm Items delivered JOY-iT Mega 2560 Pro with Pins Further Specifications Input Voltage 7 - 9 Volt on Vin, 5 Volt on mUSB Logic level 5 Volt Output current 800 mA Voltage regulator LDO (for up to 12 V peak) Frequency 16 MHz (12 MHz are possible for data exchange) Download Manual
€ 29,95
Members € 26,96
Qoitech Otii Arc - Power Supply, Power Meter and Data Acquisition
Otii Arc is the ultimate developer tool for designing highly energy-efficient devices. It is an easy-to-use, all-in-one, featured-packed tool for every developer's table.It records currents and voltages and displays them in real-time as charts and interactive measurements for analysis and comparisons. Recordings can be synchronized with UART debug logs, giving insights into what drains the energy.Otii Arc is compact, portable, and powered via USB from your laptop (DC supply is optional). It comes with a lifetime subscription of Otii software (standard version), a powerful and easy-to-use desktop application for Ubuntu, Windows & macOS, download here. Channels 10 Sampling Rate 4 kSa/s Main Current (<19.5mA) 1 kSa/s other channels Power Supply Voltage 5 V USB optional 7 V - 9 V DC, up to 5 A Power Consumption < 1 W Operating Temperature 15 °C – 25 °C Storage Temperature -20 °C - 60 °C Cooling Method Convection Dimensions 145 mm x 110 mm x 50 mm Weight 500 g Maximum Measurement Length No limits Testing Modes Main Voltage, Main Current, ADC Voltage, ADC Current, Sense+ Voltage, Sense- Voltage, GPI1 level, GPI2 level, UART RX, UART TX Maximum Output Voltage 3.75 V (USB supply, auto range) 4.20 V (USB supply, high range) 4.55 V (DC supply, auto range) 5.00 V (DC supply, high range) Maximum Output Current 5.0 A peak 2.5 A continuous Maximum Input Voltage 5 V on any pin Maximum Input Current 2.5 A sink capability Range Accuracy Resolution Voltage 5 V ±(0.1% + 1.5 mV) 1 mV Current ±19.5 mA±2.7 A2.7 A - 5.0 A ±(0.1% + 50 nA)±(0.1% + 150 uA)±(1%) 5 nA82 uA1.5 mA For more information, click here.Included Qoitech OTii ARC USB to micro-USB cable
€ 995,00€ 899,00
Members identical
-
, by Clemens Valens FNIRSI DPOX180H 2-in-1 Digital Phosphor Oscilloscope (Review)
The Fnirsi DPOX180H 2-channel handheld 180 MHz digital sampling oscilloscope fits in the pocket of your coat, weighs 285 g and retails for less than...