Search results for "peak"
Peak Peak Atlas DCA55 Semiconductor Analyser
The DCA55 is great for automatically identifying the type of semiconductor on the test leads as well as the pinout and many other parameters. Supports transistors MOSFETs, JFETs (gate pin only can be identified), diodes, LEDs and lots more. Automatically identifies type of component, pinout and other important parameters. Now features transistor leakage measurement and Germanium/Silicon identification. Component Support Bipolar transistors (NPN/PNP inc Silicon/Germanium) Darlington transistors (NPN/PNP) Enhancement mode MOSFETs (N-Ch and P-Ch) Depletion mode MOSFETs (N-Ch and P-Ch) Junction FETs (N-Ch and P-Ch). Only gate lead identified. Diodes and diode networks (2 and 3 lead types). LEDs and bi-colour LEDs (2 lead and 3 lead types). Low power sensitive Triacs and Thyristors (<5 mA trigger and hold) Measurements Part type identification Pinout identification BJT current gain (hFE) BJT base emitter voltage (Vbe) BJT collector leakage current MOSFET gate threshold voltage Diode forward voltage drop (Vf) Specifications Analyser type Transistors, Diodes, LEDs, MOSFETs, JFETs Pinout detection Full pinout (only Gate on JFETs) Pinout configuration Connect any way round Transistor measurements Vbe, hFE, Iceo MOSFET measurements Vgs(on) Diode measurements Vf Probe type Universal grabber type Battery Single AAA cell (supplied). Life typically 1300 ops Test conditions Typically 5 mA, 5 V peak Display type Alphanumeric LCD (with backlight) Included DCA55 Semiconductor Component Analyser instrument Comprehensive illustrated user guide Fitted universal hook probes AAA Alkaline battery Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (DE) User Guide (IT)
€ 59,95
Members € 53,96
Peak Peak Atlas ZEN50 Zener Diode Analyser
The Atlas ZEN is ideal for testing Zener diodes (including avalanche diodes), transient suppressors, LEDs and LED strings. It generates constant current pulses (selectable from 2 mA, 5 mA, 10 mA and 15 mA) at voltages from 0V to 50V. So even high voltage Zeners or high voltage LED strings can be tested. Test currents are supplied in narrow pulses to ensure that the component under test remains at a constant temperature. The voltage of the part is displayed on the screen together with the test current and also a measure of the component's slope resistance (also known as dynamic impedance). Specifications Analyser type Zeners, LEDs, TVS etc Test currents 2 mA, 5 mA, 10 mA, 15 mA Voltage range 0.00 to 50.00 V Slope resistance range 0 to 8000 Ohms Battery type Single AAA (supplied). Life typically 1400 ops Test method Triple pulse burst @ 10pps (typ) Test current duty cycle 3% Display type Alphanumeric LCD (with backlight) Included ZEN50 Instrument Fitted flexible test leads with gold plated crocs Comprehensive illustrated user guide AAA Alkaline battery Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (DE) User Guide (IT)
€ 69,95
Members € 62,96
Peak Peak Atlas DCA75 Pro Advanced Semiconductor Analyser
The DCA75 Pro is a great instrument that combines ease-of-use with amazing features. It can automatically identify a huge range of semiconductors, automatically identify pinouts and measure detailed parameters. Features Built-in graphics display (now backlit) to show detailed schematic of the component you're testing as well as pinout and measurement data. USB connectivity to allow curve tracing, data storage/retrieval and device matching on your Windows PC (Windows 7 and higher). Single internal AAA alkaline cell for standalone operation. Component Support Bipolar transistors (NPN/PNP inc Silicon/Germanium) Darlington transistors (NPN/PNP) Enhancement mode MOSFETs (N-Ch and P-Ch) Depletion mode MOSFETs (N-Ch and P-Ch) Junction FETs (N-Ch and P-Ch). Both symmetrical and asymmetrical types Enhancement IGBTs (N-Ch and P-Ch) Diodes and diode networks (2 and 3 lead types) Zener diodes (up to about 9 V) Voltage regulators (up to about 8 V) LEDs and bi-colour LEDs (2 lead and 3 lead types) Low power sensitive Triacs and Thyristors (<10 mA trigger and hold) Measurements BJT current gain (hFE) BJT base emitter voltage (Vbe) BJT collector leakage current MOSFET on and off gate threshold voltages MOSFET transconductance JFET pinch-off voltage JFET transconductance JFET IDSS (drain current for Vgs=0) IGBT on and off gate threshold voltages IGBT transconductance Voltage regulator output voltage Voltage regulator quiescent current consumption Voltage regulator drop-out voltage Zener voltage Diode forward voltage drop Specifications Analyser type Semiconductor components Component detection Automatic Pinout detection Automatic, connect any way round Display type Graphic LCD (now backlit) Interface type USB for optional PC connection PC functions Curve tracing (Windows 7 and higher) Software Included on USB drive for Windows 7 and higher Battery Single AAA cell (supplied) Included DCA75 Semiconductor Component Analyser PC software on a USB Flash Drive for Windows 11, 10, 8, 7, XP Micro USB cable Fitted universal premium hook probes AAA Alkaline battery Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (DE) User Guide (IT) Software Installation Guide (EN) Software and Firmware Package
€ 169,95
Members € 152,96
Peak Peak UTP05E Network Cable Analyser - Ultimate Atlas IT Kit
Peak UTP05E is a comprehensive CAT 5/5e/6 network cable analyser with superb accessories. Easy to use and very fast. Automatically identifies cable type (Straight through, cross-over, token ring etc) and verifies all the connections. Faults are clearly displayed and explained on screen. The Atlas IT will even instruct you on making up standard and special cables, complete with wire colors. Display type is alphanumeric LCD (not backlit). Features Automatic connection pattern recognition. Rapid assessment of all 8 wires within your cable. Identifies missing connections, shorted connections or incorrect connections. Will display the identity number of the 'identified' terminators to allow for easy testing and identification of multiple cable runs. Can display common cable colour codes to help you make up cables. Included UTP05 instrument. 2 miniature terminators to plug into another end of the cable run. 4 short patch cables to enable testing of patch panels and wall sockets. 24 miniature identified terminators, great for testing and identifying multiple cable runs. Pair of RJ11-to-RJ45 adapters to allow for easy testing of RJ11 based cabling. RJ45 to 8 x gold plated crocodile adapter for testing unterminated cables. Detailed printed user guide, complete with full-colour Ethernet wiring chart for common cable configurations. Alkaline battery installed and a spare alkaline battery. All supplied in a durable padded carry case. Specifications Category Cat 5, 5e, 6 (UTP) Connection type RJ45 plug or socket (RJ11 using supplied adapter set) Lines tested 8 lines (shielding not tested) Max. cable length 150 metres (500 feet) Test voltage ±5 V Test current ±2.5 mA Temperature range 10°C to 50°C (50°F to 122°F) Battery operating range 7 V to 13 V Battery type GP23, L1128, MN21, V23 (12 V Alkaline) Instrument dimensions 103 x 70 x 20 mm (4.1' x 2.8' x 0.8') Terminator dimensions 18 x 15 x 14 mm (0.7' x 0.6' x 0.6') Downloads Datasheet (EN) User Guide (EN) User Guide (DE) User Guide (FR) Common Ethernet Wiring Diagrams Avoid socket damage
€ 259,00€ 239,00
Members identical
Peak Peak Atlas ESR70 Gold - Low Resistance and Capacitance Meter
The Peak Atlas ESR70 Gold is an enhanced version of the previous Peak Atlas ESR70 Plus. It does everything that the ESR70 Plus did but better. It now measures capacitance up to 10x faster, and over a wider range, thanks to new test algorithms. The capacitance measurement is also much less influenced by parallel resistances or leakage current thanks to our new Triple-Slope measurement system. Using the supplied gold plated probes (removable), the Atlas ESR70 Gold can measure ESR down to a resolution of 0.01 ohms, up to 40 ohms. It can even measure ESR for capacitors that are in-circuit. Probes are removable, allowing 2 mm compatible probes to be fitted. Audible alerts are produced for various ESR levels allowing you to perform many tests in succession without having to look at the display. The ESR70 automatically takes capacitive reactance into account, so even low value capacitors (down to 0.3 uF) can have the ESR measured accurately. Features Uses a single AAA Alkaline cell (included). Alphanumeric LCD with backlight. Automatic analysis-start when you apply the probes. Automatic capacitor discharge using controlled discharge function. ESR (and low DC resistance) measurement (even in-circuit). Capacitive reactance automatically taken into account to ensure accurate ESR. Capacitance measurement (if testing out-of-circuit). Audible alerts for various ESR levels. Extended ESR measurement range up to 40 Ohms. Optional probe alternatives easily fitted. New Gold Features Improved LCD with better backlight. 10x faster capacitance measurement for large capacitors. Enhanced user options system. New triple-slope measurement system to vastly reduce the influence of parallel resistance and/or leakage current on capacitance measurements. Much wider capacitance measurement range now 0.3 uF to 90,000 uF (was 1uF to 22,000uF). Specifications Analyser type ESR and Capacitance Component types Capacitors (>0.3 uF) ESR range 0.00 Ohms to 40.0 Ohms ESR resolution From 0.01 Ohms In-circuit use ESR only Capacitance range 0.3 uF to 90000 uF Battery type 1.5 V Alkaline AAA Cell (supplied). Life typically 1500 ops Display type Alphanumeric LCD (with backlight) Included ESR70 Equivalent Series Resistance Meter Extra-long and extra-flexible test cables (450 mm of Silicone covered cable) 2 mm gold plated plugs and sockets with removeable gold plated crocodile clips Comprehensive illustrated user guide AAA Alkaline cell Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (IT)
€ 99,95
Members € 89,96
Peak Peak Atlas LCR45 - LCR Meter with LCR Impedance Measurement
The LCR45 does everything that the popular LCR40 does, but it has some significant enhancements. The LCR45 features a new high capacity micro and high resolution ADCs. LCR45 incorporates advanced maths, based on Complex Impedance analysis. This allows for enhanced component value measurement as well as a comprehensive and detailed impedance display. Features Supplied with gold plated removable hook probes. Fluid measurements with hold function. Automatic or manual component type. Automatic or manual test frequency, DC, 1 kHz, 15 kHz or 200 kHz. Enhanced measurement resolution: 0.2 µH, 0.2 pF and 0.2 Ohms. Easy menu system for user settings. Enhanced compensation for component parasitics and losses (such as core losses etc). Automatic or manual power-off. Specifications Analyser type LCR and component impedance Component types Auto/Manual for L,C & R Measurement types Inductance, Capacitance and Resistance Other measurements Complex impedance/admittance More measurements Magnitude and Phase of impedance Inductance range 0uH to 2H Capacitance range 0 pF to 10000 uF Resistance range 0R to 2MR Test frequency Auto and manual: DC, 1 kHz, 15 kHz, 200 kHz Display type Alphanumeric LCD (not backlit) Measurement scheme Continuous (with optional hold) Battery GP23 (12 V/55 mAH type), ~700 ops Included LCR45 Passive Component Impedance Meter 2 mm plugs and sockets and removeable hook probes Comprehensive illustrated user guide 2 Batteries, one installed and one spare. GP23 Alkaline battery. (12 V/55 mAH) Downloads Datasheet (EN) User Guide (EN) User Guide (FR) User Guide (IT)
€ 109,95
Members € 98,96
Peak Peak Atlas Star Pack (LCR40 & DCA55)
A fantastic dual instrument pack featuring the Atlas DCA Semiconductor Analyser and the Atlas LCR Passive Component Analyser. Housed in a robust padded case, complete with spare battery, user guide and space for accessories. The LCR40 (for Inductors, Capacitors and Resistors) is ideal for the hobbyist and professional alike. The DCA55 (for most semiconductors) provides fast component identification, pinout identification and wide component support. LCR40 Handheld LCR analyser providing measurements for inductance, capacitance and resistance. The component type is automatically detected for you, just connect and press 'test'. The test frequency is automatically selected to provide the best measurement resolution. Test frequencies include DC, 1kHz, 15kHz and 200kHz. Inductance from 1uH to 10uH, minimum resolution of 1uH, typical accuracy of ±1.5% between 100uH and 100mH. Capacitance from 1pF to 10,000uF, minimum resolution of 1pF typical accuracy of ±1.5% between 200pF and 500nF. Resistance from 1R to 2MR, typical accuracy of ±1%. Test frequency is displayed with the measurement. Inductor DC resistance also displayed when testing inductors. Supplied with removable gold plated hook probes, battery and user guide. Compatible with standard 2mm test connectors. Not designed for in-circuit use. Automatic component type detection: Inductor, Capacitor or Resistor Automatic test frequency selection: DC, 1kHz, 15kHz and 200kHz Inductance from 1uH to 10H Capacitance from 1pF to 10,000uF Resistance from 1Ohm to 2MOhm Inductance measurement also shows DC winding resistance Test frequency displayed for all measurements Typical accuracy of 1.5% for inductors and capacitors (see spec table for details) Typical accuracy of 1% for resistors Test lead complete with gold plated 2mm plugs and sockets Supplied with removable gold plated hook probes DCA55 Connect any way round to automatically identify and measure a wide range of semiconductor devices. The DCA55 will automatically identify the type of the part, pinout and many component parameters. Components supported include bipolar NPN/PNP transistors, darlingtons, diode-protected transistors, transistors with built-in resistors, enhancement mode MOSFETs, depletion mode MOSFETs, diodes, diode networks, LEDs, 2 and 3 lead bicolour LEDs, JFETs and many more. Further measurements are displayed including transistor gain, leakage current, pn voltage drops, LED voltages, MOSFET threshold voltages and much more. Even if you don't know anything about the part, just connect it in any configuration and the DCA55 will identify the type of part for you and also identify all the leads. Supplied with universal gold plated hook probes, battery and illustrated user guide. Not designed for in-circuit testing. Automatic pinout detection and identification, connect any way round Automatic part type identification Supports semiconductors including transistors, MOSFETs, diodes, LEDs, JFETs and much more Detection of special component features such as transistors with diodes or transistors with built-in resistors Transistor gain measurement Transistor leakage measurement MOSFET gate threshold measurement Semiconductor voltage drop measurement Supplied with gold plated red/green/blue universal hook probes Included LCR40 DCA55 Extra GP23 Battery Dual Carry Case
€ 169,95
Members € 152,96
PeakTech PeakTech 8200 Measuring Accessories Set
This comprehensive collection of test accessories for the electronics area ensure the best suitable measuring adapter for the desired application for each digital multimeter. All clips and cables are manufactured to the latest safety standards and provide a safe implementation in every application for the user. The material used is a flexible and non-slip plastic that can endure the harshest kind of usage. Included in the set: PeakTech 7010 2 x Tapping clamps (red/black) 5 A with round-hook PeakTech 7015 2 x Safety Alligator Clips 10 A (red/black) PeakTech 7020 4 x 4 mm Safety Connection Leads (red/black) PeakTech 7025 2 x 4 mm Safety Connection Leads with Connector (red/black) TKS-8 Test Leads with 2mm Probe Tip and sleeves PeakTech TF-50 Temperature Bead Probe -40 … +204°C PeakTech TF-55 Universal- Temperature Probe -50...+300°C
€ 54,95
Members € 49,46
PeakTech PeakTech 3445 Bluetooth Multimeter
The PeakTech 3445 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions.As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness.In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.Through these many technical qualities, this device is suitable for the outdoor use of every electrician, technician and engineer in the service, construction or industrial sector.Features Automatic illuminated functions keys and rotary switch Integrated powerful LED Flashlight Bleutooth 4.0 interface for data transfer to Android or iOS smartphones TrueRMS measurement ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z) 3 5/6-digits measurement value display (max. 5999) LCD-Display with Relative-value measurement and 42-segment bargraph Continuity with buzzer and diode-test Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %) Heavy Duty Case, IP67 dust- and waterproof Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V Accessories: Carrying case, Test Leads, K-type Specifications DCV 600 mV / 6 / 60 / 600 / 1000 V +/-0,8% + 5 dgt. ACV + DCV @ 10 MΩ 6 / 60 / 600 / 1000 V +/-1,5% + 20 dgt. ACV + DCV @ 3 kΩ (LO Z) 6 / 60 / 600 / 1000 V +/-3% + 30 dgt. ACV + DCV Frequency range 50 Hz … 400 Hz ACV 6 / 60 / 600 / 1000 V +/-1% + 5 dgt. ACV Frequency range 50 Hz … 1000 Hz DCA 600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt. ACA 600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt. ACA Frequency range 50 Hz … 400 Hz Ohm 600 Ω / 6 / 60 / 600 kΩ / 6 / 60 MΩ +/- 1,5% + 5 dgt. Capacitance 60 / 600 nF / 6 / 60 / 600 / 6000 µF +/-3% + 5 dgt. Frequency 10 Hz … 10 kHz +/- 1,0% + 5 dgt. Temperature 20.0 °C … +760 °C +/-1,0% + 5 °C Interface Bluetooth 4.0 Low Energy Operating Voltage 4 x 1,5 V AAA Batteries Dimensions (WxHxD) 75 x 170 x 50 mm Weight 400 g
€ 149,95
Members € 134,96
PeakTech PeakTech 1240 2-ch Oscilloscope (60 MHz)
Digital storage osczilloscope of the latest generation with high-resolution color display, backlight, high bandwidth and high sampling rate, VGA-output, large internal memory, USB port and LAN connection for integration into networks. The amazing value for money and modern technology allows a wide range of applications in education, service and quality assurance area. High-resolution TFT color display with 800 x 600 pixels and 65536 colors USB port for real-time data transmission or reading of internal memory Saving of measured values and graphics directly onto the USB-stick VGA-output port for external monitor Autoset and autoscale function for easy operation LAN connection for remote access via network Internal memory of 10 million points per channel or 15 waveforms 20 automatic measurement modes and FFT function PASS/FAIL function Safety: EN 61010-1; CAT II Accessories: 2 pcs. BNC cable, USB cable, software CD for Windows 2000/XP/Vista/7/8/10, power cable, 2 probes, carrying case and manual Bandwidth 60 MHz Display 20 cm (8”) TFT with 65536 colors Resolution 800 x 600 Pixel Channel 2 CH Sampling mode normal/peak detect/average Sampling rate each Channel 250 MSa/s Input coupling AC, DC, GND Input impedance 1 MΩ +/- 2 % in parallel with 10 pF +/- 5 pF Input voltage 400 V DC or ACpp Sensitivity 2 mV - 10 V/Skt/div. Rise time < 5,8 ns Accuracy +/- 3 % Vertical resolutions 8 Bits (2 CH simultaneously) Horizontal scale 5ns-100s/Skt./div Sampling range 0,5 - 250 S/s Trigger type Edge/Video/Pulse/Slope Trigger mode Auto, Normal, Single Trigger coupling DC, AC, LF, HF 20 automat. measurements peak-peak, cycle RMS, Vmax, Vmin, Vtop, Vbase, Vamp, overshoot, preshoot, rise time, fall time, +width, -width, +duty, -duty, delay A→B (rising), delay A→B(falling), frequency, period, min, max Phase difference +/- 3° Record length 10.000.000 points/CH Interfaces USB Device 2.0, USB Host 2.0, VGA, LAN Operation voltage 100 ~ 240 V ACrms / 50/60 Hz Dimensions (WxHxD) 340 x 155 x 70 mm Weight 1.8 kg
€ 499,00
Members € 449,10
PeakTech PeakTech 4350 Clamp Meter
AC/DC True RMS Current Clamp Meter (3 4/5-digit) This power clamp meter in the most modern design is suitable for small cable diameters up to 17 mm, leakage currents up to 5 A in high-precision resolution of 1 mA and also currents up to 80 A with 100 mA resolution. Furthermore, this device is topped by its exact measurement functions for voltage, current, capacitance, resistance and frequency measurements, as well as a temperature measurement with the enclosed K-Type probe.In addition to the measurement features, the device also offers function keys for minimum and maximum value display, a data hold function and a switchable LED flashlight for the measuring area. Through this and also the True RMS measurement, this device is the perfect tool for every electrician in the energy and building sector and other service technicians in the wide range of electronics. Features 3 4/5-digits 27mm LCD display (max. 4999) with backlight illumination Current measurements up to 5 A at 1 mA resolution Current measurements up to 80 A with 100 mA resolution Multimeter measurement functions for voltage, frequency, resistance and capacitance Continuity and diode test Temperature measurement function with K-type probe Data-Hold, MAX/MIN-Hold Relative value measurement function LED to measuring station lighting Auto Power Off Safety: EN 61010-1, CAT III 600 V Accessories: Case, test leads, K-Type thermocouple, battery and manual Specifications DCV 500 mV/5/50/500/600 V; 0,1 mV; +/- 1,5 % + 2 dgt. ACV 500 mV/5/50/500/600 V; 0,1 mV; +/- 2,0 % + 4 dgt., Frequency range: 40 ... 400 Hz DCA 5000 mA/80 A; 1 mA; +/- 2,5 % + 30 dgt. ACA 5000 mA/80 A; 1 mA; +/- 2,5 % + 25 dgt. Frequency range: 40 ... 400 Hz Ohm 500 Ω/5/50/500 kΩ/5/50 MΩ; 0,1 Ω; +/- 1,5 % + 2 dgt. Capacitance 50/500 nF/5/50/500 µF; 10 pF; +/- 3,5 % + 10 dgt. Frequency 5 Hz ... 10 MHz; 1 mHz; +/- 1,2 % + 3 dgt. Temperature -20 ... +760°C; 0,1°C; +/- 2,0 % + 3°C Operation voltage 9 V-Battery Dimensions (WxHxD) 70 x 210 x 37 mm Weight 200 g
€ 79,95
Members € 71,96
PeakTech PeakTech 3442 Bluetooth Multimeter
The PeakTech 3442 is a digital multimeter for heavy duty use with a high variety of useful measurement functions.By keystroke, the display of the device can be switched between 3 5/6-digit LCD and a high resolution 4 5/6-digit LCD, whereas all measurements are gathered as True RMS values. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this new developed device has a 4-20 mA% current loop measurement, low-pass filter and an Auto-Hold function, among many other things.Through these many technical qualities, this device is suitable for the daily use of every electrician, technician and engineer in the service, construction or industrial sector.Features Bluetooth 4.0 interface for data transfer to Android smartphones Windows software for data transmission and remote control 4 5/6-digits measurement value display (max. 59999) LCD-Display with Relative-value measurement 42-segment bargraph True RMS measurement Continuity and diode-test Auto-Hold, Min, Max and AVG function 4-20 mA% current loop measurement Duty Cycle (Hz / %) Low Pass filter function Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V; TÜV/GS Accessories: Carrying case, Test Leads, K-type Thermocouple, Batteries and manual Specifications DCV 600 mV / 6 / 60 / 600 / 1000 V +/-0,9% + 5 dgt. ACV 600 mV / 6 / 60 / 600 / 1000 V +/-1,0% + 5 dgt. Frequency range 50 Hz … 5 kHz DCA 600 / 6000 µA / 60 / 600 mA / 10 A +/-1,5% + 5 dgt. ACA 600 / 6000 µA / 60 / 600 mA / 10 A +/-2,5% + 5 dgt. Frequency range 50 Hz … 5 kHz ACA 500 / 5000 µA / 50 / 500 mA / 10 A +/-0,8% + 5 dgt. Frequency range 50 Hz … 5 kHz Ohm 600 Ω / 6 / 60 / 600 kΩ / 6 / 60 MΩ +/- 1,2% + 5 dgt. Capacitance 60 / 600 nF / 6 / 60 / 600 µF / 6 mF +/-1,0% + 2 dgt. Frequency 60 Hz … 10 MHz +/- 1,0% + 2 dgt. Temperature -50.0 °C … +760 °C +/-2,0% + 3 °C Operating Voltage 4 x 1,5 V AAA Batteries Dimensions (WxHxD) 80 x 175 x 50 mm Weight 400 g
€ 149,00
Members € 134,10