Search results for "PeakTech"
PeakTech PeakTech 3350 Multimeter
The PeakTech 3350 was specially developed for use in the craftsmanship and industry and offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight, which is used to illuminate the area where the measurement has to be taken. A multi-colored LED bar is located above the 6000-digit display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is found in NCV mode, yellow when measuring large capacities or flashes red when the phase tester mode is active (LIVE).The PeakTech 3350 was manufactured according to the latest development aspects and has a double-insulated injection-molded housing with rubber coating, a tilt stand on the back, which can be removed to replace the batteries. The fuses are located underneath the stand as well, if it is neccessary to replace these. With this device the measuring range is selected automatically, which enable particularly fast response times.Features True RMS voltage up to 600 V and current up to 10 A AC/DC 6,000 LCD display with automatic backlight Multi-colored warning LED for various measuring functions Automatic range selection Manual range selection possible using selection buttons Integrated LED flashlight for lighting the area where the measurement has to be taken Auto off and battery status display Safety: EN 61010-1; CAT III 600 V Accessories: bag, test leads, temperature sensor, temperature adapter, batteries and user manual Specifications Basic Accuracy DC +/- 0.5% Battery 1.5 V AAA Capacitance max. 60 mF Digital counts 6000 Display Type LCD Info-LEDs ■ LED-lamp ■ NCV ■ Over voltage category CAT III 600 V Range selection Auto True RMS ■ V DC max. 600 V A AC max. 10 A Hz max. 10 MHz OHM max. 60 MΩ Temp. max. 1000 °C Temp. min. -18 °C mA DC max. 600 mA mV DC max. 600 mV µA DC max. 6000 µA V AC max. 600 V mV AC max. 600 mV A DC max. 10 A mA AC max. 600 mA µA AC max. 6000 µA Downloads Manual_PeakTech 3350 (German-English) Manual_PeakTech 3350 (French)
€ 59,95
Members € 53,96
PeakTech PeakTech 3442 Bluetooth Multimeter
The PeakTech 3442 is a digital multimeter for heavy duty use with a high variety of useful measurement functions.By keystroke, the display of the device can be switched between 3 5/6-digit LCD and a high resolution 4 5/6-digit LCD, whereas all measurements are gathered as True RMS values. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this new developed device has a 4-20 mA% current loop measurement, low-pass filter and an Auto-Hold function, among many other things.Through these many technical qualities, this device is suitable for the daily use of every electrician, technician and engineer in the service, construction or industrial sector.Features Bluetooth 4.0 interface for data transfer to Android smartphones Windows software for data transmission and remote control 4 5/6-digits measurement value display (max. 59999) LCD-Display with Relative-value measurement 42-segment bargraph True RMS measurement Continuity and diode-test Auto-Hold, Min, Max and AVG function 4-20 mA% current loop measurement Duty Cycle (Hz / %) Low Pass filter function Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V; TÜV/GS Accessories: Carrying case, Test Leads, K-type Thermocouple, Batteries and manual Specifications DCV 600 mV / 6 / 60 / 600 / 1000 V +/-0,9% + 5 dgt. ACV 600 mV / 6 / 60 / 600 / 1000 V +/-1,0% + 5 dgt. Frequency range 50 Hz … 5 kHz DCA 600 / 6000 µA / 60 / 600 mA / 10 A +/-1,5% + 5 dgt. ACA 600 / 6000 µA / 60 / 600 mA / 10 A +/-2,5% + 5 dgt. Frequency range 50 Hz … 5 kHz ACA 500 / 5000 µA / 50 / 500 mA / 10 A +/-0,8% + 5 dgt. Frequency range 50 Hz … 5 kHz Ohm 600 Ω / 6 / 60 / 600 kΩ / 6 / 60 MΩ +/- 1,2% + 5 dgt. Capacitance 60 / 600 nF / 6 / 60 / 600 µF / 6 mF +/-1,0% + 2 dgt. Frequency 60 Hz … 10 MHz +/- 1,0% + 2 dgt. Temperature -50.0 °C … +760 °C +/-2,0% + 3 °C Operating Voltage 4 x 1,5 V AAA Batteries Dimensions (WxHxD) 80 x 175 x 50 mm Weight 400 g
€ 149,00
Members € 134,10
PeakTech PeakTech 4350 Clamp Meter
AC/DC True RMS Current Clamp Meter (3 4/5-digit) This power clamp meter in the most modern design is suitable for small cable diameters up to 17 mm, leakage currents up to 5 A in high-precision resolution of 1 mA and also currents up to 80 A with 100 mA resolution. Furthermore, this device is topped by its exact measurement functions for voltage, current, capacitance, resistance and frequency measurements, as well as a temperature measurement with the enclosed K-Type probe.In addition to the measurement features, the device also offers function keys for minimum and maximum value display, a data hold function and a switchable LED flashlight for the measuring area. Through this and also the True RMS measurement, this device is the perfect tool for every electrician in the energy and building sector and other service technicians in the wide range of electronics. Features 3 4/5-digits 27mm LCD display (max. 4999) with backlight illumination Current measurements up to 5 A at 1 mA resolution Current measurements up to 80 A with 100 mA resolution Multimeter measurement functions for voltage, frequency, resistance and capacitance Continuity and diode test Temperature measurement function with K-type probe Data-Hold, MAX/MIN-Hold Relative value measurement function LED to measuring station lighting Auto Power Off Safety: EN 61010-1, CAT III 600 V Accessories: Case, test leads, K-Type thermocouple, battery and manual Specifications DCV 500 mV/5/50/500/600 V; 0,1 mV; +/- 1,5 % + 2 dgt. ACV 500 mV/5/50/500/600 V; 0,1 mV; +/- 2,0 % + 4 dgt., Frequency range: 40 ... 400 Hz DCA 5000 mA/80 A; 1 mA; +/- 2,5 % + 30 dgt. ACA 5000 mA/80 A; 1 mA; +/- 2,5 % + 25 dgt. Frequency range: 40 ... 400 Hz Ohm 500 Ω/5/50/500 kΩ/5/50 MΩ; 0,1 Ω; +/- 1,5 % + 2 dgt. Capacitance 50/500 nF/5/50/500 µF; 10 pF; +/- 3,5 % + 10 dgt. Frequency 5 Hz ... 10 MHz; 1 mHz; +/- 1,2 % + 3 dgt. Temperature -20 ... +760°C; 0,1°C; +/- 2,0 % + 3°C Operation voltage 9 V-Battery Dimensions (WxHxD) 70 x 210 x 37 mm Weight 200 g
€ 79,95
Members € 71,96
PeakTech PeakTech 8200 Measuring Accessories Set
This comprehensive collection of test accessories for the electronics area ensure the best suitable measuring adapter for the desired application for each digital multimeter. All clips and cables are manufactured to the latest safety standards and provide a safe implementation in every application for the user. The material used is a flexible and non-slip plastic that can endure the harshest kind of usage. Included in the set: PeakTech 7010 2 x Tapping clamps (red/black) 5 A with round-hook PeakTech 7015 2 x Safety Alligator Clips 10 A (red/black) PeakTech 7020 4 x 4 mm Safety Connection Leads (red/black) PeakTech 7025 2 x 4 mm Safety Connection Leads with Connector (red/black) TKS-8 Test Leads with 2mm Probe Tip and sleeves PeakTech TF-50 Temperature Bead Probe -40 … +204°C PeakTech TF-55 Universal- Temperature Probe -50...+300°C
€ 54,95
Members € 49,46
PeakTech PeakTech 3445 Bluetooth Multimeter
The PeakTech 3445 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions.As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness.In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.Through these many technical qualities, this device is suitable for the outdoor use of every electrician, technician and engineer in the service, construction or industrial sector.Features Automatic illuminated functions keys and rotary switch Integrated powerful LED Flashlight Bleutooth 4.0 interface for data transfer to Android or iOS smartphones TrueRMS measurement ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z) 3 5/6-digits measurement value display (max. 5999) LCD-Display with Relative-value measurement and 42-segment bargraph Continuity with buzzer and diode-test Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %) Heavy Duty Case, IP67 dust- and waterproof Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V Accessories: Carrying case, Test Leads, K-type Specifications DCV 600 mV / 6 / 60 / 600 / 1000 V +/-0,8% + 5 dgt. ACV + DCV @ 10 MΩ 6 / 60 / 600 / 1000 V +/-1,5% + 20 dgt. ACV + DCV @ 3 kΩ (LO Z) 6 / 60 / 600 / 1000 V +/-3% + 30 dgt. ACV + DCV Frequency range 50 Hz … 400 Hz ACV 6 / 60 / 600 / 1000 V +/-1% + 5 dgt. ACV Frequency range 50 Hz … 1000 Hz DCA 600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt. ACA 600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt. ACA Frequency range 50 Hz … 400 Hz Ohm 600 Ω / 6 / 60 / 600 kΩ / 6 / 60 MΩ +/- 1,5% + 5 dgt. Capacitance 60 / 600 nF / 6 / 60 / 600 / 6000 µF +/-3% + 5 dgt. Frequency 10 Hz … 10 kHz +/- 1,0% + 5 dgt. Temperature 20.0 °C … +760 °C +/-1,0% + 5 °C Interface Bluetooth 4.0 Low Energy Operating Voltage 4 x 1,5 V AAA Batteries Dimensions (WxHxD) 75 x 170 x 50 mm Weight 400 g
€ 149,95
Members € 134,96
PeakTech PeakTech 2710 Digital RCD Tester
Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations. The various selectable test currents and characteristics of the FI allow flexible use of this instrument. FI testers allow a fault current to flow and determine at which fault current the FI reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated switch. 3-digit LCD display with backlight Normal (N) or Selective (S) -type RCD test Applicable measurement standards: IEC 61557-6, NF EN 61557-6, VDE 0413-6 Accessories: Carrying case, Test leads, Batteries and User manual Technical Specifications Nominal test current 10/30/100/500/1000mA Current selection 0.5x, 1x, 2x, 5x nominal current Trip time 10-2000 ms at 0.5 x 10-500 ms at 1x 10-150 ms at 2x 10-40 ms at 5x Ramp test 0.4 x to 1.4 times nominal rated current RCD Types Type-A, Type-AC Operation voltage 6 x 1,5 V AA (UM-3) batteries Dimensions (WxHxD) 92 x 200 x 50 mm Weight 700 g
€ 159,95
Members € 143,96
PeakTech PeakTech 3440 Multimeter with Bluetooth & Datalogger
This innovative graphical multimeter convinces through its modern design and the high variety of measurement functions, as well as the consistent design only to the latest technical achievements.The backlit TFT color display shows the various menus of the graphical user interface, the measurement points of the data logger recording, and the measured values of the multimeter function with its reliable, high precision 4 5/6-digits LCD display.The resulting measurement data can be displayed and saved via Bluetooth by an App (iOS / Android) on your smart-phone. In addition, the new PeakTech multimeter app has the ability to forward the data directly from the mobile phone by e-mail or to save it as a data table.Due to the extensive measurement capabilities and intuitive operation mode, this device is well suited for each professional repairman, electronic engineers or technicians who are interested in a sturdy, highly precise and technically powerful multimeter. 4 5/6-digits measurement value display (max. 49999) 5.6 cm (2.2') TFT color display with backlighting Graphical user interface with menu control Data logger function with graph Internal memory for 10.000 measured values (Datalogger 20.000) Bluetooth interface for data transfer to a smart-phone via Android or iOS App App for smart-phones to download Lithium-Polymer Battery - Runtime ~ 8h Safety: TÜV/GS, EN 61010-1; CAT III 1000 V / CAT IV 600 V Accessories: Carrying case, Test leads, K-type thermocouple, 7.4 V Li-Ion battery, Battery charge adapter and manual Specifications DCV 500mV / 5 / 50 / 500 / 1000 V +/-0,05% + 5 dgt. ACV 500mV / 5 / 50 / 500 / 1000 V +/-0,5% + 5 dgt. Frequency range 50 Hz … 20 kHz ACV+DCV 5 / 50 / 500 / 1000 V +/-1,2% + 20 dgt. Frequency range 50 Hz … 5 kHz DCA 500 / 5000µA / 50 / 500 mA / 10 A +/-0,2% + 5 dgt. ACA 500 / 5000µA / 50 / 500 mA / 10 A +/-0,8% + 5 dgt. Frequency range 50 Hz … 5 kHz Ohm 500 Ω / 5 / 50 / 500 kΩ / 5 / 50 MΩ +/-0,2% + 5 dgt Capacitance 5 / 50 / 500 nF / 5 / 50 / 500 µF / 10 mF +/-1,0% + 5 dgt. Frequency 80 Hz … 10 MHz +/-0,01% + 5 dgt. Temperature -100.0 °C … +1350 °C +/-1,0% + 3 °C Operating Voltage 7.4 V-Li-Ion Battery Dimensions (WxHxD) 80 x 175 x 50 mm Weight 400 g
€ 219,00
Members € 197,10
PeakTech PeakTech 1265 2-ch Oscilloscope (30 MHz)
The PeakTech 1265 is an affordable 30 MHz 2-channel digital storage oscilloscope with a high-resolution TFT color display and extensive additional functions. It has a sampling rate of up to 250 MS/s and convinces with its high quality and easy handling with the best price/performance ratio. To quickly display each incoming waveform, simply press the Autoset key and the oscilloscope itself searches for the best possible display. With Autoscale, however, the scaling of the time base can be adjusted in a user-friendly manner. This oscilloscope has a VGA output for displaying the oscilloscope display on an external monitor or projector. Features 2-channel oscilloscope with 30 MHz analog bandwidth at max. 250 MS/s sampling rate 8 inch (20 cm) TFT color display with 800 x 600 pixels LAN, USB host, USB device & VGA interface Autoset function for user-friendly operation Recording length of max. 10,000 points Automatic measurement modes, XY mode and FFT function Specifications Bandwidth 30 MHz Channels 2 Screen size (TFT) 8' (20 cm) Resolution 800 x 600 Pixel Display Type Color-TFT Sampling 1 CH 250 MS/s Sampling 2 CH 125 MS/s Hor. scale max. 100 s/div Hor. scale min. 5 ns/div Memory depth 10,000 Points Rise Time < 14 ns Vert. resolution 8 Bit Vert. scale max. 10 V/div Vert. scale min. 2 mV/div Interfaces 1x USB, 1x LAN, 1x VGA Mains voltage 110/240 V AC; 50/60 Hz Included PeakTech 1265 Oscilloscope USB cable Software CD for Windows Power cord 2 probes BNC cable Carrying case Manual Downloads Software Datasheet_DE-EN Datasheet_FR Datasheet_IT Datasheet_ES
€ 459,00
Members € 413,10
PeakTech Additional Camera for PeakTech 5600 (2 m flexible)
Dust and waterproof additional camera for our PeakTech 5600 with 6 dimmable LEDs for illumination of any object. The diameter of the flexible camera is only 8.2 mm and small enough to enter even the smallest openings. Suitable for all applications, the wide viewing angle of 60 °, as well as the automatic depth of focus from 30 mm to 'infinite' ensure a clear view of the object. Features 8,2 mm camera with 6 dimmable LEDs for illumination Camera is dust and waterproof according to IP67 2 m camera with flexible 'Goose-Neck' Specifications Diameter Camera 8.2 mm Viewing angle 60° Length Camera Shaft 200 cm (flexible), oil resistant lluminatin Camera 6x high-intensity LED white, dimmable Weight 350 g
€ 69,95
Members € 62,96
PeakTech PeakTech 1404 2-ch Oscilloscope (100 MHz)
Specially developed for the education and hobby sector, this fully-fledged digital storage oscilloscope offers the best possible price/performance ratio without having to compromise on functionality or technical features. Whether Autoset and Autoscale, mathematical measurement functions, FFT, Cursor or XY mode and even a zoom function, all standard market functions are already integrated in this series. The data storage of the waveforms is either internal with memory for 16 waveforms or external on a USB memory in TXT, CSV or BIN format, which can be read out with the included software. Configurations can also be saved internally or screenshots of the display can be saved externally. The display of the waveforms can be achieved quickly and user-friendly through the Autoset function, via AutoScale the measured waveforms can be displayed even more precisely as required, whereby these settings can of course also be carried out completely manually via the key control. Features 2-channel oscilloscope with 100 MHz analogue bandwidth at max. 1 GS/s sampling rate 17.5 cm (7') TFT colour display with 800 x 480 pixels USB device connection for real-time data transmission USB host connection for external USB data carriers Handy and flat housing design with carrying handle Autoset function for user-friendly operation Recording length of max. 10,000 points Automatic measuring modes, XY mode and FFT function Specifications Bandwidth 100 MHz Channels 2 Sampling 1 CH 1 GS/s Sampling 2 CH 500 MS/s Rise Time < 3.5 ns Display Type Color TFT Resolution 800 x 480 Pixels Screen size (TFT) 17.5 cm (7') Hor. scale max. 1000 s/div Hor. scale min. 2 ns/div Memory depth 10,000 Points Vert. resolution 8 Bit Vert. scale max. 5 V/div Vert. scale min. 2 mV/div Mains voltage 110/240 V AC; 50/60 Hz Downloads User Manual Driver Software
€ 299,00
Members € 269,10
PeakTech PeakTech 1525 DC Power Supply (16 V, 40 A)
This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit designs allow units to have small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The dual action (coarse and fine set) control knobs make tuning the voltage and current level ever so smooth, precise and fast, due to the rotary encoder and microprocessor control. Setting the CC current limiting can be done in open circuit at output poles. The three user defined presets of voltage and current limiting levels facilitate quick access to frequently used Volt/Ampere settings. The full remote control functionality offer a wide range of operation possibilities for the industrial and more sophisticated users. High RFI immunity and excellent EMI Over load, Over Temperature and Tracking Over Voltage protections 3 user defined, recallable settings for voltage and current values Full Remote control of voltage and current and output control on and off Isolated ground, Active PFC and high power efficiency, Intelligent fans control from zero to full speed Rotary Encoder Control Knob with coarse and fine tuning Safety: EN 61010-1, EN 60950-1 Accessories: power cable and manual Display 3-digit 15 mm green LED-display Output voltage 1 ~ 16 V DC adjustable Output current 40 A / 5 A (main output (rear panel) / front output) Output power 640 W Residual ripple 5 mV rms Efficiency > 85,5 % Operation voltage 200 ~ 240 V AC; 50/60 Hz Dimension (WxHxD) 200 x 90 x 255 mm Weight 2.6 kg
€ 349,00
Members € 314,10
PeakTech PeakTech 3710 R/C-Pen Meter for SMD
Auto scan pen meter in a set of tweezers for SMD measure precise and fast small ship components, ideal for use in the service- and education-fields. 3 5/6 digit, 11 mm LCD-display; max. 5999 Low battery indication and auto power off Automatic recognize resistance, capacitance and diode, continuity test Measure high resistance and capacitance quickly Accessories: batteries and manual Specifications Resistance 600 Ω/6/60/600 kΩ/6/60 MΩ; ± 1,2% + 2 dgt. Capacitance 6/60/600 nF/6/60/600 µF/6/60 mF; ± 3,0% + 3 dgt. Auto scan mode 600 Ω ~ 6 MΩ / 400 pF ~ 600 µF Operation voltage 2 x 1,5 V AG13 button cells Dimensions (WxHxD) 181 x 35 x 20 mm Weight 65 g
€ 52,95
Members € 47,66