Search results for "KIT DE"
Soldered LED Dice Solder Kit
If you are looking for an easy way to get started with soldering or simply want to make a small portable gadget, this set is a great opportunity. "LED cube" is an educational set for learning the soldering skill, with which you get a small electronic game at the end. After you turn on and shake this board, certain leds will light up randomly and symbolize the number, as if a real die had been thrown. It is based on the Attiny404 microcontroller, programmed in Arduino, and there is a battery on the back which makes this gadget portable. There is also a keychain so you can always carry your new game with you! Soldering is easy according to the markings on the board. Included 1x PCB 1x ATtiny404 microcontroller 7x LEDs 7x Resistors (330 ohm) 1x Resistor (10 kohm) 1x Battery holder 1x CR2032 battery 1x Switch 1x Vibration sensor SW-18020P 1x Keychain ring
€ 9,95
Members € 8,96
Evil Mad Science DIYIC Proto Board Kit
The matte-black circuit board is extra thick and has subtle white markings, including an alphanumeric grid and PIN labels. The wiring pattern — that of classic breadboards — is easy to see by looking at the exposed traces on the bottom of the board.The kit comes complete with the 'Integrated Circuit Leg' stand and 8 colour-coded thumbscrew terminal posts. Using the terminal posts and solder points, you can hook up to your 'IC' with bare wires, lugs, alligator clips, and/or solder joints. Connections to the 8 terminal posts are through the three-position strips on the PCB; each is labelled with the corresponding PIN.Features Anodized aluminium stand 8-32 size press-fit threaded inserts (8 pieces) pre-installed in the protoboard All materials (including the circuit board and stand) are RoHS compliant (lead-free) Tri lobular thread forming screws (6 pieces, black, 6-32 thread size) and spacers for mounting the stand. Dimensions: 13.25 cm × 8.06 cm x 2.54 mm Dimensions assembled: 13.25 cm × 9.9 cm × 4.3 cm
€ 34,95
Members € 31,46
Soldered Reaction Game Solder Kit
If you are looking for a simple way to learn soldering, or just want to make a small gadget that you can carry, this set is a great opportunity. Reaction game is an educational kit which teaches you how to solder, and in the end, you get to have your own small game. The goal of the game is to press the button next to the LED as soon as it turns on. With every correct answer, the game gets a bit harder – the time you have to press the button shortens. How many correct answers can you get? It’s based on ATtiny404 microcontroller, programmed in Arduino. At its back, you’ll find CR2032 battery which makes the kit portable. There’s keychain holder as well. Soldering process is easy enough based on the mark on the PCB. Included 1x PCB 1x ATtiny404 microcontroller 4x LEDs 4x Pushbuttons 1x Switch 4x Resistors (330 ohm) 1x CR2032 battery holder 1x Battery CR2032 1x Keychain holder
€ 9,95
Members € 8,96
SparkFun SparkFun Sensor Kit
These are some of our favourite sensors from each category. But wait, there's more! The SparkFun Sensor Kit now includes several of our sensor boards that feature the Qwiic Connect System for rapid prototyping! This version of the kit has received a complete overhaul! This huge assortment of sensors makes an amazing gift for that exceptional electronics enthusiast in your life! Included Large Piezo Vibration Sensor (With Mass): A flexible film able to sense for vibration, touch, shock, etc. When the film moves back and forth an AC wave is created, with a voltage of up to ±90. Reed Switch: Senses magnetic fields, makes for a great non-contact switch. 0.25' Magnet Square: Plays nicely with the reed switch. Embed the magnet into stuffed animals or inside a box to create a hidden actuator to the reed switch. 0.5' Force Sensitive Resistor: A force-sensing resistor with a 0.5' diameter sensing area. Great for sensing pressure (i.e., if it's being squeezed). Flex Sensor (2.2'): As the sensor is flexed, the resistance across the sensor increases. Useful for sensing motion or positioning. SoftPot: These are very thin variable potentiometers. By pressing on various positions along the strip, you vary the resistance. Mini Photocell: The photocell will vary its resistance based on how much light it's exposed to. Will vary from 1kΩ in the light to 10kΩ in the dark. PIR Motion Sensor: Easy-to-use motion detector with an analog interface. Power it with 5-12VDC, and you'll be alerted of any movement. QRD1114 Optical Detector/Phototransistor: An all-in-one infrared emitter and detector. Ideal for sensing black-to-white transitions or can be used to detect nearby objects. IR Diode: This LED can handle up to 50mA of current and outputs in the 940-950nm IR spectrum. Use to send signal to talk to the included IR receiver diode or just turn off your neighbor's TV. IR Receiver Diode: This simple IR receiver will detect an IR signal coming from a standard IR remote control or the IR diode included in the kit. Resistor 1.0M Ohm 1/4 Watt PTH: Two 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards. The large resistor helps dampen any voltage spikes when using the large piezo vibration sensor with a microcontroller. Resistor 10K Ohm 1/4 Watt PTH – 20 pack (Thick Leads): 1/4 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10KΩ resistors make excellent pullups, pulldowns, and current limiters. Resistor 330 Ohm 1/4 Watt PTH – 20 pack (Thick Leads): 1/4 Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ω resistors make excellent current-limiting resistors for LEDs. SparkFun 9DoF IMU Breakout – ISM330DHCX, MMC5983MA (Qwiic): This breakout board includes a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. Connect this board over I2C using a Qwiic cable or solder wires or headers to the SPI pins to get started using one of the three sensors or using all three together to determine 3D orientation. SparkFun Atmospheric Sensor Breakout – BME280 (Qwiic): The SparkFun BME280 Atmospheric Sensor Breakout is an easy way to measure barometric pressure, humidity, and temperature readings, all without taking up too much space. SparkFun Indoor Air Quality Sensor – ENS160 (Qwiic): The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. SparkFun Capacitive Touch Slider – CAP1203 (Qwiic): This little board acts great as a non-mechanical button. Use the three pads on the board or connect your own input for a great touch button or slider with no moving parts. Flexible Qwiic Cable (100 mm): Use these to connect up to four Qwiic boards in your kit. RGB and Gesture Sensor (APDS-9960): This board does a little bit of everything. You can measure ambient light or color as well as detect proximity and do gesture sensing all over I2C. Soil Moisture Sensor (with screw terminals): Ever wonder if your plant needs water? This sensor outputs an analog signal based on the resistance of the soil. Since water is conductive, the soil water content will be reflected in the soil resistance. Sound Detector: Ever need to know if there is noise in an area? This board will not only tell you, but it will also output amplitude as well as the full audio signal. Break Away Headers (Straight): Solder these pins to any of the breakouts to prototype on a breadboard. You'll want to solder these to boards that do not have Qwiic connectors such as the gesture sensor and sound detector.
€ 134,95
Members € 121,46
JOY-iT JOY-iT Sensor Kit X40
This high-quality sensor kit has been specially developed for the most common open-source platforms. It is compatible with single-board computers (Raspberry Pi, Banana Pi, CubieBoard, CubieTruck, Beaglebone, pcDuino) and microcontrollers (Arduino, ATmega, AVR, PIC, STM32, etc.). It contains a total of 40 different sensors. You can either solder the sensors or stick them on a board to work on different circuits or experiments. Comprehensive sensor set with 40 sensors including analogue- and voltage-converter High-quality, reliable sensors Universally applicable Kit contents KY-001 Temperature sensor module KY-002 Vibration switch module KY-003 Hall magnetic field sensor module KY-004 Button module KY-005 Infrared transmitter module KY-006 Passive Piezo buzzer module KY-009 RGB LED SMD module KY-010 Light barrier module KY-011 2-color (Red+Green) 5 mm LED module KY-012 Active Piezo buzzer module KY-013 Temperature sensor module KY-015 combi sensor temperature+humidity KY-016 RGB 5 mm LED module KY-017 Tilt switch module KY-018 Photoresistor module KY-019 5 V relais module KY-020 Tilt switch module KY-021 Mini magnetic reed module KY-022 Infrared receiver module KY-023 Joystick module (XY-axis) KY-024 Linear magnetic hall sensor KY-025 Reed module KY-026 Flame sensor module KY-027 Magic light cup module KY-028 Temperature sensor module (Thermistor) KY-029 2-color (Red+Green) 3 mm LED module KY-031 Knock sensor module KY-032 Obstacle detect module KY-033 Tracking sensor module KY-034 7 clour LED flash module KY-035 Bihor magnetic sensor module KY-036 Metal-touch sensor module KY-037 Microphone sensor module (high sensitivity) KY-038 Microphone sound sensor module KY-039 Heartbeat sensor module KY-040 Rotary Encoder KY-050 Ultrasonic distance sensor KY-051 Voltage Translator / Level Shifter KY-052 Pressure sensor / Temperatur sensor (BMP180) KY-053 Analog-digital converter A detailed list with a short description of the functions, programming examples and software, can be found at http://sensorkit.en.joy-it.net.
€ 59,95
Members € 53,96
Soldered Stop Me Game Solder Kit
If you are looking for a simple way to learn soldering, or just want to make a small gadget that you can carry, this set is a great opportunity. Stop me game is an educational kit which teaches you how to solder, and in the end, you get to have your own small game. The LEDs go up and down, and your goal is to press the button as soon as the green LED turns on. With every correct answer, the game gets a bit harder – the time you have to press the button shortens. How many correct answers can you get? It’s based on ATtiny404 microcontroller, programmed in Arduino. At its back, you’ll find CR2032 battery which makes the kit portable. There’s keychain holder as well. Soldering process is easy enough based on the mark on the PCB. Included 1x PCB 1x ATtiny404 microcontroller 7x LEDs 1x Pushbutton 1x Switch 7x Resistors (330 ohm) 1x CR2032 battery holder 1x Battery CR2032 1x Keychain holder
€ 9,95
Members € 8,96
Franzis Franzis Voice Changer Kit
For your next Undercover Mission With this technological gadget, your voice is guaranteed to remain unrecognizable. The voice changer modifies the frequencies of your voice so that even your best friends won't recognize it. The ideal tool for remaining 'undercover' or playing a prank! Additionally required: 1 x 9 V battery
€ 29,95
Members € 26,96
Elektor Bundles Elektor Ultimate Sensor Kit
This bundle consists of a high-quality sensor kit and comprehensive project book. It has been specifically developed to enable use of sensors across multiple open-source microcontroller platforms including Arduino, Raspberry Pi, and ESP32. The bundle contains a total of 40 different sensors that are applied in multiple projects. All described projects are supported with software examples. The projects provided in the kit include the following: Changing LED brightness RGB LEDs Creating rainbow colours Magic wand Silent door alarm Dark sensor with relay Secret key Magic light cup Decoding commercial IR handsets Controlling TV channels with IT sensors Target shooting detector Shock time duration measurement Ultrasonic reverse parking Toggle lights by clapping hands Playing melody Measuring magnetic field strength Joystick musical instrument Line tracking Displaying temperature Temperature ON/OFF control Mobile phone-based Wi-Fi projects Mobile phone-based Bluetooth projects Sending data to the Cloud
€ 79,95€ 64,95
Members identical
SpikenzieLabs Solder:Time Watch Kit
Easy to solder real time watch kit with a unique laser cut acrylic casing. Four individual acrylic parts cut to fit the internal PCB, battery and switch perfectly. Included is a velcro wrist band. After soldering the Solder:Time, the watch is built by stacking the acrylic parts with the PCB and holding it together with the included screws.The Solder:Time was designed to be a wrist watch. It doesn't have to be limited to living on your wrist, you could also use it as a badge or desk clock.Features Great looking laser cut acrylic case Unique watch Easy to solder Stand alone project – no computer or other programmer required. Just solder it and it's ready! On board Dallas DS1337+ Real Time Clock (RTC) for super accurate time keeping Jumper (on bottom) for always on use. Hackable: Programming and I²C pads labeled on bottom Clear front and back casing to show the internal electronics Adjustable wrist band Can be also be worn as a badge with optional badge clip. Long lasting battery, with special LED lighting method and very low power processor sleeping. Included Solder:Time PCB with all of the electronics Laser cut acrylic casing with four screws Easy to use Velcro type wrist band (long enough for huge wrists, trim-able for smaller ones. CR2032 Battery DownloadsDocumentationRequiredSoldering Iron, solder and wire snips.
€ 32,95
Members € 29,66
Cleaning Nozzle Drill Kit (0.1-1.0 mm)
Cleaning nozzle drill kit small box containing 10 carbide PCB drills from 0.1 mm to 1 mm all with 4 mm shaft. Ideal for drilling small precision holes in pcb's, plastic or soft metal.
€ 8,95
Members € 8,06
Arduino Arduino Sensor Kit Base
Grove is an open-source, modulated, and ready-to-use toolset and takes a building block approach to assemble electronics. This Kit includes a Base Shield to which the various Grove modules can be connected both individually, or together in various combinations to create fun and exciting projects. All of the modules use a Grove connector, which connects each of the components to a Base Shield in just a few seconds. The Base Shield can then be mounted onto an Arduino UNO board and can be programmed using the Arduino IDE. Instructions for connecting and programming the different modules are also included in this kit. This kit was elaborated in collaboration with Seeed Studio and provides the Arduino community with the opportunity to build projects with minimal effort of both wiring and coding. This kit acts as a bridge to the world of Grove and provides a flexible way for Makers to extend their projects to include other complex Grove modules. The Kit comes includes access to an online platform with all the instructions required to plug, sketch and play with the different Grove Modules. Please note: This kit does not include the Arduino Uno board. Included 1 Base Shield that is designed to fit on top of an Arduino UNO board. It comes equipped with 16 grove connectors, which, when placed on top of the UNO, provides the functionality to various pins. It includes: 7x digital connections 4x analog connections 4x I²C connections 1x UART connection 10 Grove modules included can be connected to the base shield, either through the digital, analog, or I2C connectors on the shield. Let's take a quick look at them: The LED - a simple LED that can be turned ON or OFF, or dimmed. The button - pushbutton can either be in a HIGH or LOW state. The potentiometer - a variable resistor that increases or decreases resistance when turning its knob. The buzzer - a piezo speaker that is used to produce binary sounds. The light sensor - a photoresistor that reads light intensity. The sound sensor - a tiny microphone that measures sound vibrations. The air pressure sensor - reads air pressure, using the I²C protocol. The temperature sensor - reads temperature and humidity at the same time. The accelerometer - a sensor used for orientation, used for detecting movement. The OLED screen - a screen that values or messages can be printed to. 6 Grove cables allow you to easily connect the modules to the Base Shield without any soldering required. The Arduino Sensor Kit Library is a wrapper that contains links to other libraries related to certain modules such as the accelerometer, air pressure sensor, temperature sensor, and OLED display. This library provides easy-to-use APIs that will help you build a clear mental model of the concepts you will be using.
€ 44,95
Members € 40,46
JYE Tech JYE Tech Capacitance Meter DIY Kit
Features Accuracy better than 2% Measure range: 1pF - 500uF Automatic range switch Zeroing available Real time serial output of measurement read-outs with time stamp Low cost and easy to build Weight: 40g
€ 24,95
Members € 22,46