Search results for "JOY-iT 3.2" Touch Display for Raspberry Pi"
JOY-iT JOY-iT 3.5" Touchscreen for Raspberry Pi
With the 3.5 inch large TFT touch screen display, you can build a mini tablet PC based on a Raspberry Pi. The display, with a maximum resolution of 480x320 pixels, is simply plugged into the existing GPIO connectors. Specifications Display: 3.5' (8.89 cm) Resolution: 480x320 pixels Touchscreen Type: Resistive Touch screen controller: XPT2046 Colors: 65536 Backlight: LED Connection: GPIO header Aspect ratio: 8:5 Display Size: 85 x 56 mm
€ 34,95
Members € 31,46
JOY-iT JOY-iT 7" Touchscreen for Raspberry Pi
Resolution: 1024 x 800 pixels Supported Devices: Raspberry Pi A+/ B+/ 2B / 3B, Banana Pi, Banana Pro, Windows-PCs Special features: Can also be used as an independent HDMI-Display LCD Type: TFT Connections: HDMI, Micro-USB Touch Controller: GT811 Touch-Panel: Type Capacitive (5 Multi-Touch) Backlight: LED Display-Size: 154.21 x 85.92 mm
€ 79,95
Members € 71,96
JOY-iT Case for 7" RGB-Touch-Display for Raspberry Pi
Case for 7' RGB-Touch-Display for Raspberry Pi
€ 12,95€ 6,95
Members identical
Waveshare Waveshare 3.5" Touch Display Module for Raspberry Pi Pico (480x320)
Features 480 x 320 resolution, IPS screen, 65K colors, clear and colorful displaying effect Dedicated touch controller, bringing more smooth touching effect than AD-controlled solutions MicroSD card slot for storing images and direct displaying them easily Programmable backlight control, power saving Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Operating voltage 5 V Resolution 480 x 320 pixels Communication interface SPI Display size 73.44 x 48.96 mm Display panel IPS Pixel size 0.153 x 0.153 mm Driver ILI9488 Dimensions 86.00 x 57.20 mm Touch controller XPT2046 Downloads Wiki
€ 29,95
Members € 26,96
JOY-iT JOY-iT Explorer Board for Raspberry Pi Pico
The Explorer Board is the easy and efficient way to develop your Raspberry Pi Pico projects. Since the most important components are already integrated, you save time and effort on wiring. The Explorer Board has a wide range of interface connectors so you can connect your projects to a variety of modules and devices. With the integrated breadboard, you can quickly build and realize your own projects. Thanks to the possibility to connect or disconnect all modules individually, you can use your pins, which are additionally led separately to the outside, for other projects or experiment on the integrated breadboard at any time. Features Fast and efficient experimenting with the Raspberry Pi Pico Raspberry Pi Pico can be plugged in directly All modules can be switched on and off individually Additional integrated breadboard for own development Specifications Integrated modules: 4 RGB LEDs, buzzer, relay, 1.8“ TFT display, DHT11 temperature sensor, 4 buttons, breadboard Interfaces: 4x servo motor, SPI, I²C, UART, 5x crocodile clip connector Power supply: 5 V USB-C Dimensions: 219 x 110 x 27 mm Downloads Manual Examples and libraries
€ 27,95
Members € 25,16
JOY-iT JOY-iT 5" Touchscreen for Raspberry Pi
Display: 5' (12.7 cm) Weight: 159 g Resolution: 800 x 480 pixels Display Type: Touch-Control Amount HDMI-HDMI Adapter: 1x Micro USB Interface (only Power): 1x Supports Raspberry: Raspbian, Ubuntu Dimensions, without mounting: 120 x 79 x 7 mm Scope of supply: 5 inch HDMI LCD, HDMI-HDMI Adapter, Touchpen
€ 62,95
Members € 56,66
JOY-iT JOY-iT Explorer 700 Expansion Board for Raspberry Pi
The JOY-iT Explorer 700 Expansion Board for Raspberry Pi expansion board has the following functions: Pin-Header to put directly on the Raspberry Pi B+, 2B, 3B or 4B UART interface: connect easily UART modules like for example RS232, RS485, USB to UART (TTL-cable) AD/DA IO interface: connected cable via screws definable 1-WIRE interface: to connect a 1-WIRE device Sensor interface: digital and analogue sensors can be connected 0.96 inch OLED display: SSD1306 Driver, 128 x 64 Pixel, SPI interface Buzzer USB to UART, converter with CP2102 chipset (mini USB-Port) PCF8591: 8-bit analog / digital converter, I²C interface BMP180: sensor for atmospheric pressure, temperature and height over normal zero, I²C interface PCF8574: I/O Chip for I²C interface DS3231: high precision RTC chip, I²C interface Power LED Programmable LED Joystick LFN0038K IR infrared receiver Interfaces UART, AD/DA: connected cables can be fixed with screws, 1-Wire, Sensor Display 0.96“ OLED Display (SSD1306 Driver, 128x64 Pixel) Dimensions 85 mm x 56 mm x 17 mm Weight 30 g For more information, check out the user manual here.
€ 21,95
Members € 19,76
JOY-iT JOY-iT Explorer 500 Expansion Board for Raspberry Pi
The JOY-iT Explorer 500 Expansion Board for Raspberry Pi expansion board has the following functions: Pin-Header to put directly on the Raspberry Pi B+, 2B or 3B UART interface: you can easily connect UART modules like for example RS232, RS485, USB to UART (TTL-cable) 8x I/O interface: you can easily connect with I/O controlled modules SPI interface for SPI controlled modules I²C interface for I²C controlled modules LCD interface for HD44780 industrial standard LCD module USB to UART, converter with CP2102 chipset (mini USB port) Power LED 4x programmable LED 4x programmable buttons Potentiometer: control of contrast for LCD displays (point 6) RTC battery holder 32.768K quartz: RTC quartz CP2102: onboard USB to UART chip for debugging CP2102: Jumper for: on / off RTC: Jumper for: on / off User LEDs Jumper for: on / off (point 9) User keys Jumper for: on / off (point 10) It can be directly plugged onto the Raspberry. Interfaces UART, 8x I/O, SPI, I²C, HD44780 Industry-Standard-LCD RTC Battery-Holder, PCF8564-RTC-Chip incl. 32.789K RTC-Quartz Jumper (ON / OFF) RTC, CP2102 (USB to UART), User LEDs, User Keys Dimensions 85 mm x 17 mm x 56 mm Weight 36 g For more information, check out the user manual here.
€ 16,95
Members € 15,26
Pimoroni HyperPixel 4.0 - Hi-Res Display for Raspberry Pi (Touch Version)
HyperPixel 4.0 is the perfect way to use your RPi without a bunch of cables or a bulky display. Design your own interface to control your project, display data, or turn your Pi into a tiny media centre. This version of HyperPixel has a gorgeous IPS display, with wide viewing angles, custom-made cover glass, and the alternate I²C interface is broken out for advanced users. Features High-speed DPI interface 4.0' IPS (wide viewing angle, 160°) display (86.4 x 51.8 mm) 800x480 pixels (~235 PPI) 18-bit colour (262,144 colors) 60 FPS frame rate Contrast ratio: 500:1 Capacitive touch 40-pin female header included to boost height for Raspberry Pi B+, 2, 3, 3B+ and 4 Standoffs included to securely attach to your RPi Compatible with all 40-pin header Raspberry Pi models One-line installer Dimensions: 58.5 x 97 x 12 mm (WxHxD, depth includes header and display) HyperPixel uses a high-speed DPI interface, allowing it to shift 5x more pixel data than the usual SPI interface that these small Pi displays use. It has a 60 FPS frame rate and a resolution of approximately 235 pixels per inch (800x480) on its 4.0' display. The display can show 18-bits of colour (262,144 colors). This Touch version has a capacitive touch display that's more sensitive and responsive to touch than a resistive touch display, and it's capable of multi-touch! Everything comes fully-assembled, and there's no soldering required! The display is securely stuck down to the HyperPixel 4.0 PCB and connected via a neat little flush-mounting FPC cable. Just pop HyperPixel 4.0 on your RPi and run our installer to get everything set up! Please note: when installing HyperPixel 4.0 onto your RPi make sure not to press down on the screen surface! Hold the board by its edges and wiggle it to mate with the extended header (or GPIO header). Also take care not to pull on the edges of the glass display when removing your HyperPixel. It'll work with any 40-pin version of the RPi, including RPi Zero and RPi Zero W. If you're using it with a larger RPi then use the extra 40-pin header that's included to boost it up to the required height. If you're using a Zero or Zero W then just pop it straight onto the GPIO. The included standoff kit allows you to mount your HyperPixel 4.0 safely and securely to your RPi. Just screw them into the posts on the underside of the HyperPixel 4.0 PCB and then secure with screws through the mounting holes on your RPi. Downloads GitHub
€ 79,95
Members € 71,96
Waveshare Waveshare 7" Capacitive Touch Display Kit for Raspberry Pi Zero (1024x600)
The Zero-DISP-7A is a 7″ touch display kit for Raspberry Pi Zero with IPS Display Expansion Board featuring 1024x600 pixels and 5-point capacitive touch. Features 7-inch IPS touch display with a hardware resolution of 1024x600. 5-point touch control, toughened glass panel with up to 6H hardness. When working with Raspberry Pi Zero, supports Raspberry Pi OS, Ubuntu, Kali, and Retropie systems. Onboard ETH/USB HUB function, adapting RJ45 and USB port serving as an alii-in-one mini computer. Onboard 4-pin speaker header and 3.5 mm audio jack, support for HDMI audio output. Specifications Zero connectors Mini HDMI port, 2x USB Micro male port (1x HUB, 1x Power supply) Display 7-inch 1024 x 600 pixels, 5-point capacitive touch Networking 100M Ethernet RJ45 port USB 2x USB 2.0 port Audio Headphone jack, 4-pin speaker header Power input USB Type-C Interface, 5V Included 1x Zero-DISP-7A 1x Button board 1x Button board cable (9 cm) 4x White nylon spacer Downloads Wiki
€ 64,95
Members € 58,46
Pimoroni HyperPixel 4.0 Square Touch - Hi-Res Display for Raspberry Pi
HyperPixel 4.0 Square has all the great features of our standard HyperPixel 4.0 – a crisp, brilliant IPS display with touchscreen, and high-speed DPI interface – it's just more square!This square version of HyperPixel 4.0 is great for custom interfaces and control panels, and works really well for Pico-8 games. Everything is pre-soldered and ready to go, just pop it onto your RPi, run our installer, and away you go!Features High-speed DPI interface 4.0' IPS (wide viewing angle, 160°) display (72x72 mm) 720x720 pixels (~254 PPI) 18-bit colour (262,144 colors) 60 FPS frame rate Optional capacitive touchscreen 40-pin female header included to boost height for Raspberry Pi B+, 2, 3, 3B+ and 4 Standoffs included to securely attach to your RPi Compatible with all 40-pin header Raspberry Pi models One-line installer HyperPixel 4.0 Square uses a high-speed DPI interface, allowing it to shift 5x more pixel data than the usual SPI interface that these small RPi displays normally use. It has a 60 FPS frame rate and a resolution of approximately 254 pixels per inch (720x720px) on its 4.0' display. The display can show 18-bits of colour (262,144 colors).This Touch version has a capacitive touch display that's more sensitive and responsive to touch than a resistive touch display, and it's capable of multi-touch!Please note: when installing HyperPixel 4.0 Square onto your RPi make sure not to press down on the screen surface! Hold the board by its edges and wiggle it to mate with the extended header (or GPIO header). Also take care not to pull on the edges of the glass display when removing your HyperPixel.It'll work with any 40-pin version of the RPi, including RPi Zero and RPi Zero W. If you're using it with a larger RPi then use the extra 40-pin header that's included to boost it up to the required height. If you're using a Zero or Zero W then just pop it straight onto the GPIO.The included standoff kit allows you to mount your HyperPixel 4.0 Square safely and securely to your RPi. Just screw them into the posts on the underside of the HyperPixel 4.0 Square PCB and then secure with screws through the mounting holes on your RPi.DownloadsGitHub
€ 79,95
Members € 71,96
Waveshare Waveshare 2.13" Touch E-Paper E-Ink Display for Raspberry Pi Zero (incl. Case)
Features 2.13' capacitive touch e-Paper display, 5-point touch, 250×122 pixels Supports waken up by user-defined gesture No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W Comes with development resources and manual (examples for Raspberry Pi) Included 1x 2.13inch Touch e-Paper HAT 1x ABS case 1x Screwdriver 1x Thermal tape 1x Rubber feet 4pcs 2x Screws Downloads Documentation
€ 34,95
Members € 31,46