Description
The board's main processor is a low-power ARM Cortex-M0 32-bit SAMD21, like in the other boards within the Arduino MKR family. The WiFi and Bluetooth connectivity is performed with a module from u-blox, the NINA-W10, a low-power chipset operating in the 2.4 GHz range. On top of that, secure communication is ensured through the Microchip ECC508 crypto chip. Besides that, you can find a battery charger, and an RGB LED on-board.
Official Arduino WiFi Library
You can get your board to connect to any kind of existing WiFi network, or use it to create your own Arduino Access Point. The specific set of examples we provide for the MKR WiFi 1010 can be consulted at the WiFiNINA library reference page.
Compatible with other Cloud Services
It is also possible to connect your board to different Cloud services, Arduino's own among others. Here are some examples of how to get the MKR WiFi 1010 to connect to:
-
Blynk: a simple project from the Arduino community connecting to Blynk to operate your board from a phone with little code
-
IFTTT: in-depth case of building a smart plug connected to IFTTT
-
AWS IoT Core: Arduino made this example on how to connect to Amazon Web Services
-
Azure: visit this GitHub repository explaining how to connect a temperature sensor to Azure's Cloud
-
Firebase: you want to connect to Google's Firebase, this Arduino library will show you how
Specifications
| Microcontroller | SAMD21 Cortex-M0+ 32bit low power ARM MCU |
| Radio Module | u-blox NINA-W102 |
| Power Supply | 5 V |
| Secure Element | ATECC508 |
| Supported Battery | Li-Po Single Cell, 3.7 V, 1024 mAh Minimum |
| Operating Voltage | 3.3 V |
| Digital I/O Pins | 8 |
| PWM Pins | 13 |
| UART | 1 |
| SPI | 1 |
| I2C | 1 |
| Analog Input Pins | 7 |
| Analog Output Pins | 1 |
| External Interrupts | 10 |
| Flash Memory | 256 KB |
| SRAM | 32 KB |
| EEPROM | no |
| Clock Speed | 32.768 kHz, 48 MHz |
| LED_Builtin | 6 |
| USB | Full-Speed USB Device and embedded Host |
| Length | 61.5 mm |
| Width | 25 mm |
| Weight | 32 g |
