Description
This laboratory power supply offers a controllable 0...60 V or 0...6 A DC main output with a maximum continuous power of 150 W. For developers, this laboratory power supply offers two switchable USB outputs with their own LCD display with voltage and current values.
If you use a load up to 2.5 A, you can set the output voltage up to 60 V. If you want to use a higher current up to 6 A, set the load to a maximum of 25 V. Of course, all stages are also adjustable in between, e.g. 30 V/5 A, 40 V/3.7 A or 50 V/3 A.
The current and voltage setting also can be done when the output is switched off. By pressing the knob for current or voltage, the setting resolution can be fine/coarse switched from 1 mA to 100 mA or 10 mV to 1 V.
Due to the high range of functions and the simple operation with the best price-performance ratio, this laboratory power supply is ideal for the education, hobby, development and service sector.
- Blue LCD display showing the output voltage and current values
- Green LCD display showing the USB output voltage and current values
- 150 W constant output power
- Adjustable voltage range: 0~60 V at 0~2.5 A and 0~25 V at 2.5~6 A
- Voltage and current pre-selection with switchable output
- C.C. (Constant Current) and C.V. (Constant Voltage) mode with connected load
- Protection against short circuit, overload and overtemperature
- Accessories: Power cable, Connection Leads and Manual
Output Voltage |
0 ~ 60 V DC (@2,5 A) |
Output Current |
0 ~ 6 A DC (@ 25 V) |
Output Power |
150 W |
Display Resolution (V) |
10 mV |
Display Resolution (A) |
1 mA |
Setting Resolution (V) |
10 mV / 1 V switchable |
Setting Resolution (A) |
1 mA / 100 mA switchable |
Ripple & noise |
≤ 5 mV RMS; ≤ 20 mA RMS |
Load regulation |
≤ 0.05% + 5 mV, ≤ 0.5% + 5 mA |
Line regulation |
≤ 0.1% + 3 mV, ≤ 0.2% + 3 mA |
Display accuracy |
+/- 0,5% + 5 dgt. |
Protection |
Overload, overtemperature, short circuit |
Operating voltage |
115 / 240 V AC; 50/60 Hz |
Dimensions (WxHxD) |
80 x 160 x 260 mm |
Weight |
1.6 kg |