Motorised Volume Pot
High-end with remote control
Published in issue 383, November 2008
Many audio enthusiasts still prefer a good potentiometer for adjusting the audio volume. It would be even nicer if this potentiometer could also be controlled remotely. This is possible with a high-quality motorised potentiometer from Alps and a handful of electronics, as is described here.
Resistors R1,R3 = 10kohm R2 = 82ohm R4 = 390ohm P1 = Alps 10kohm logarithmic stereo motor potentiometer (e.g. RK27112MC) Capacitors C1,C7,C8 = 100nF ceramic, lead pitch 5mm C3 = 100pF, lead pitch 5mm C4,C5 = 22pF, lead pitch 5mm C9 = 220uF 25 V radial, lead pitch 2.5mm C10-C13 = 22nF ceramic, lead pitch 5mm Semiconductors D1 = 2-pin dual-LED IC1 = ATMEGA8-16PU, programmed, Elektor SHOP # 071135-41 IC2 = SFH5110-36 (possibly via 3-way SIL pinheader) IC3 = 7805 Miscellaneous B1 = B80C1500 (80Vpiv, 1.5A) (round case) K1,K6,K9 = 2-way SIL pinheader K2,K7,K8 = 4- way SIL pinheader K3 = 7- way SIL pinheader K4,K5 = 2-way PCB screw terminal block, lead pitch 5mm X1 = 4MHz quartz crystal PCB, ref. 071135-1 from www.thepcbshop.com Controller software: free download 071135-11.zip
|
Click below to download a PDF copy of this article from Elektor magazine.
Please note. In view of the complexity of international markets, Elektor cannot guarantee the availability of components for this project.
|