Soldering Accessories
Fumetractor with LED Light
The soldering fume is sucked in by a 60 mm fan and released upwards through an easily replaceable activated carbon filter. All SMD components are already assembled; the user must assemble the rest. Features Small, compact design Quiet operation Enhanced LED lighting Easy to change the activated carbon filter Dimensions: 130 x 83 x 74mm 1-button usability Short press: turn the fan on or off Longer press (>0,5 s): turn the fan and the LED light on Extra long press (>1 s): turn everything on and change the brightness of LED-light Included in the kit: 1 x Board (all SMD parts pre-assembled, tested, with firmware, depending on variant) 1 x Fan (60 mm, >60.000 h) 1 x Fan guard grille 1 x Plug/socket for fan 1 x Short-travel pushbutton, angled 1 x LED light kit 4 x M4 screws (fan mounting) 4 x Nuts M4 + fuse 8 x Screws M3 (housing) 8 x Square nuts M3 2 x Activated carbon filter For more information, please visit the eHajo Dokuwiki.
Aoyue 8486 Fume Extractor
The Aoyue 8486 fume extractor utilizes 3 filters including HEPA and activated carbon beads for the max. extraction efficiency. It removes 97% of particles greater than 0.3 um. Easily position the fume extractor soldering hose exactly where you need it over the work. Dial in the perfect amount of fume extraction power using the large front panel readout and control dial. Aoyue 8486 redirects soldering smoke caused by burning flux and other fumes away from your face so you can breathe. Features Desktop fume extraction system with HEPA filter (high efficiency particulate air filter) for removing the dust particles and enhanced activated carbon filtration system. With actual carbon filter beads. Powerful suction, quiet operation. Electronic control panel with variable airflow adjustment. Sub-filters extend the life of main filters. Free standing arms. Arms can be bent as desired and maintain their shape after adjustment. Unit has mount holes so it can be attached to walls to free up desk space. Specifications Voltage input 220 V DC voltage 12 V Suction fan 3.59 m/s Suction power 18-100% HEPA filter H11 class Carbon filter Activated carbon 800 IV (cylinder type) Dimensions 184 x 184 x 152 mm (W x H x D) Weight 1.8 kg Included Main unit Flexible extractor tube Filter hood HEPA filter Activated carbon filter Sub air filter DC power brick Instruction manual
€ 179,95
Members € 161,96
Eurorack Stripboard
The Eurorack Stripboard is the most convenient way to build a simple DIY Eurorack synthesizer module. It works like a standard protoboard, but with specific additions for the Eurorack format. You can also use the Stripboard with the 4HP Front Panel. You can place up to 5 potentiometers or 5 jack connectors on the dedicated locations. The potentiometers can be any of 9 or 16 mm types, Alpha PKN160 for example. The Jack connectors are Cliff S6/BB mono style. With the Eurorack power supply interface, it's extremely easy to connect either a 16-pin or a 10-pin Eurorack power connector. The clear and detailed silkscreen labels indicate where the different voltages are located on the PCB. You can also add 2 filtering capacitors and 2 protection diodes. How to connect jacks and potentiometers The jack connectors are Cliff CL1384. They use the strips A, B, D and E. A and B are switched open when the male jack connector is inserted. D and E are the contacts to the male connector. E is Tip (the signal) and D is Ring (usually the 0V reference, often designated as “ground”). Note that Cliff jacks are insulated from the panel. The potentiometers are 9 mm (2.5 mm pin pitch) or 16 mm (5 mm pin pitch). Alpha 9 mm are a good choice. They align pretty nicely with Cliff jacks on the front panel. They connect to strips B, C and D. B is Counter Clock Wise pole. D is Clock Wise pole. and C is Wiper pole. Dimensions The PCB is 100 mm high and 50 mm wide. Thus, the depth for the Eurorack module will be 50 mm behind the panel. Downloads Documentation DIY Layout Creator
€ 9,95
Members € 8,96
Replacement Filter Set for Aoyue 8486 Fume Extractor
This complete replacement filter set for the Aoyue 8486 Fume Extractor contains a HEPA (High Efficiency Particulate Air) filter, a cotton air (sub) filter and an activated carbon air filter.
€ 49,95€ 34,95
Members identical
Fumetractor - USB-Charge-Addon
Fumetractor – USB-Charge-Addon
€ 19,95
Members € 17,96
T80-D Soldering Tip for Soldering Station AE970D
T80-D (T80-D12) Soldering Tip for Soldering Station AE970D (1.2 mm, chisel)
€ 9,95
Members € 8,96
T80-B Soldering Tip for Soldering Station AE970D
T80-B (T80-D08) Soldering Tip for Soldering Station AE970D (0.8 mm, pointed)
€ 9,95
Members € 8,96
T80-C Soldering Tip for Soldering Station AE970D
T80-C (T80-D16) Soldering Tip for Soldering Station AE970D (1.6 mm, chisel)
€ 9,95
Members € 8,96
T80-K Soldering Tip for Soldering Station AE970D
T80-K (T80-BC1) Soldering Tip for Soldering Station AE970D (1 mm, beveled)
€ 9,95
Members € 8,96
T80-I Soldering Tip for Soldering Station AE970D
T80-I (T80-BC3) Soldering Tip for Soldering Station AE970D (3 mm, beveled)
