This category offers a wide spectrum of platforms to choose from. They all have different features and you can choose the platform that best suits your needs or project.
Platforms
JOY-iT Joy-Pi Note - 11.6” Raspberry Pi 4-based Notebook
3-in-1 Solution: Notebook, Learning Platform and Experiment Center The Joy-Pi Note is the new flagship in the Joy-Pi family. With its 11.6' IPS screen and a detachable, wireless keyboard, it takes the Joy-Pi‘s basic concept in a new, high-quality and attractive format. With 46 courses and 18 projects, the Joy-Pi Note is not only suitable as an experiment center, but is also ideal for use in the education sector. With over 22 integrated sensors and modules, there are no limits to the user‘s own joy of experimentation. This simplifies the introduction to electrical engineering and programming. Due to the installed learning platform, which was developed especially for the Joy-Pi Note, the installed units can be operated and learned independently of one‘s own previous knowledge. It is also possible to connect additional sensors and modules via the pins of the Raspberry Pi, which are routed to the outside, and thus also carry out more complex projects. Of course, the Joy-Pi Note can also be used as a „classic“ notebook. All programs compatible with the Raspberry Pi 4 can be installed. The integrated 2 MP camera also makes video conferencing possible, for example. All Raspberry Pi 4 models can be used (we recommend 4 GB RAM or higher). On the bottom of the device, you will find a compartment where you can insert a power bank to also operate the Joy-Pi Note mobile. Specifications Main Features Screen 11.6' 1920x1080 IPS LCD Camera 2 MP Special features Fully equipped set, completely integrated experiment center, pre-installed learning platform, detachable wireless keyboard, integrated compartment for powerbank & accessories Lessons of the learning platform 46 courses & 18 projects for Python and Scratch Power supply 12 V hollow plug, 5 V USB Compatible to Raspberry Pi 4 (4 GB and 8 GB RAM) Keyboard layouts DE (default) + US, UK, FR, IT, PT and Nordic Dimensions 291 x 190 x 46 mm Weight 1.3 kg Included sensors, modules & accessories Display 7-segment display, 16x2 LCD module, 8x8 RGB Matrix Sensors DHT11 temperature & humidity sensor, tilt sensor, motion sensor, sound sensor, touch sensor, RFID module, light sensor, ultrasonic distance sensor Motors Servo interface, stepper motor interface, vibration motor Control Joystick, 4x4 button matrix, Raspberry Pi & PCB connection switch, motion sensor, sensitivity controller, sound sensor sensitivity controller, 16x2 LCD module brightness controller Others Relay, fan, GPIO extension, GPIO LED indicator, breadboard, IO/ADC/I²C/UART expansion interface, infrared sensor interface, buzzer, display driver Accessories RFID chip, RFID card, 12 V power supply, servo motor, stepper motor, infrared receiver, infrared remote control, DC motor with fan attachment, HDMI connector, screwdriver, microSD card (32 GB), SD card reader, electronic accessories, wireless mouse, wireless keyboard Included Joy-Pi Note Accessories Quick guide Required Raspberry Pi 4 (4 GB or 8 GB RAM)
JOY-iT JOY-iT Mega 2560 Microcontroller Learning Kit
The set consists of 86 pieces. These are a Mega 2560 microcontroller board, 2 breadboards, one USB cable, a battery holder, an IR remote control, one 4-digit segment display, 2x 1-digit segment displays, one 8x8 LED matrix, a potentiometer, one RGB LED, 5 blue LEDs, 5 yellow LEDs, 5 red LEDs, 4 buttons,a temperature sensor (LM35), 2 tilt switches, an IR receiver, one active buzzer, one passive buzzer, 3 photo resistors, a flame sensor, 18 resistors (5x 1 kΩ, 8x 220 Ω, 5x 10 kΩ), a shift register (SN74HC595N) and 30 cables. Features Model Mega 2560 Learning Kit Microcontroller ATmega 2560 R3 Projects 20 different projects Manual Incl. project manual of 63 pages as download and a printed quick reference guide Specifications Input Voltage 7-12 V Ipput Voltage (max.) 6-20 V Digital IO 54 (14 with PWM) Analog IO 16 DC Current IO 40 mA DC Current 3.3 V 50 mA Memory 256 kB (8 kB Bootloader) SRAM 8 kB EEPROM 4 kB Clock Speed 16 MHz Dimensions 11.52 x 53,3 mm
€ 54,95
Members € 49,46
JOY-iT JOY-iT Robot Car Kit 01 for Arduino
Enter the world of robotics without any complications and at a reasonable price with the Car Kit 01 for Arduino. This is a kit that can be used as a basic framework for a car/robot. The set is very easy to assemble and ready to go in no time. The supplied geared motors (with double-ended shaft) can be operated in a voltage range of 3 to 9 volts. The speed varies between 90 and 300 revolutions per minute. The torque (gf/cm) between 800 and 1200. The Car Kit is compatible with all Arduino boards. Note: You will also need to add other components such as a power source (batteries) and a controller such as an Arduino with a motor controller. The base plate already contains the holes for mounting an Arduino. User Manual
JOY-iT Joy-Car Robot for BBC micro:bit
The Joy-Car is an autonomous robot based on micro:bit and offers a modular robotics learning kit. With the help of the detailed manual, all assemblies and their functions as a whole machine are explained, as well as details of programming and codes.Sensors such as line tracking, ultra sonic, infrared and wheel speed sensors provide functions such as autonomous driving and even the control via Bluetooth via a second, separate micro:bit.The additional equipment simulates indicators, lights, reversing light and horn, thus complement the experience of an autonomous robot car. With addressable LEDs, individual lighting scenarios can also be realized.SpecificationsPower Supply 4x AA batteries Alternatively: 4.5-9 VDC Functions & Features Learning the individual components as a whole machine Suitable from 9 years on, ideal for school purposes Detailed instructions for programming including codes Programming languages: Micro:Python and MakeCode Autonomous driving by line finder, ultrasonic and infrared BT-control via separate 2nd micro:bit possible Simulation of indicators, lights, reversing light and horn Compatible with micro:bit v1 and v2 Included sensors 2x Speed sensor 3x Line tracking sensor 1x Ultrasonic sensor 2x Obstacle sensor Included electronic assembly 1x Joy-Car mainboard 2x Gear motor 2x Servo motor 4x LED board 1x Battery case Dimensions189 x 171 x 77 mmIncluded items Joy-Car Acryl Kit Sensors Electronics assembly Mounting material Connection cables RequiredBBC micro:bit v1 or v2Downloads Manual MakeCode Tutorials Websitehttps://joycar.joy-it.net/en/
€ 64,95
Members € 58,46
JOY-iT JOY-iT Grab-it Robot Arm Kit
The Grab-it Robot arm is produced in a special solid model. The frame of the arm exists of very solid, black anodized aluminium. Included in delivery are 6 PWN controlled servo motors, that are constructed for a pressure of 20 kg/cm. So there is a high range of usage and enough power reserves for your projects. The pressure range of the precision claw is adjusted to the arm and able to work under the same pressure. The arm will be delivered with a rotary plate (360°) where it has to be mounted. The rotary plate will fixed on a 28.5 x 16 cm base plate. There are already bores for all current single-board computers and development boards (Raspberry Pi, Banana Pi, Arduino,…). For an easy and accurate controlling, we recommend MotorPi (for Raspberry Pi) or Motorino (for Arduino). Highlights & Details Material: robust aluminium, black anodized incl. 6 pieces 20 kg/cm PWM/servo motors Voltage range 5 to 7.4 V DC Metal gear incl. base plate with bores for all current single-board computers and development boards incl. high-quality precision claw Motors 21.5 kg/ cm torque at 7.4V5V-7.4 V DC voltage360° mechanical angle, 180° operating rangemetal gearcontrolable via PWMCurrent intake 5 mA to 2 A (per motor) Frame Aluminum profile Dimensions Base plate 28.5 x 16 cmHeight: depending on the position of the arm, up to 42 cm Range About 30 cm from the center of the rotary plate Base plate 4.5 mm acrylic with mounting possiblity for Raspberry Pi A+/B+/2/3, CubieBoard, Arduino Mega, Banana Pi M2, pcDuino and many more.Holes with spacers allowing the attachment to a ground plate Components Robot arm in single plarts incl. rotary-plate, claw, base-plate and mounting-material, 6 motors Recommended accessories MotoPi (motor control for Raspberry Pi)Motorino (motor control for Arduino)
€ 184,95
Members € 166,46