Multimeters

The OWON XDM1241 is a fast, high-precision digital True RMS benchtop multimeter with a high-resolution 3.5-inch LCD and 50,000 counts. Its DC voltage accuracy is up to 0.05% and it can measure up to 65 values per second. Features 3.5' high-resolution LCD (480x320 pixels) 55000 counts, DC voltage accuracy up to 0.05% Up to 65 readings per second Dual line display supported Trend analysis accessible in chart mode AC True RMS measurements (bandwidth: 20 Hz – 1 kHz) SCPI support: Remote control the multimeter through PC software via USB port Data record function, you can record the measured data into internal memory, and then read and process the recorded data with your computer. Specifications Measurement Range Resolution Accuracy DC Voltage 50.000 mV 0.001 mV 0.1% +10 500.00 mV 0.01 mV 0.05% +5 5.0000 V 0.0001 V 0.05% +5 50.000 V 0.001 V 0.05% +5 500.00 V 0.01 V 0.1% +5 1000.0 V 0.1 V 0.1% +10 AC Voltage 500 mV～750 V 20 Hz～45 Hz 1% +30 45 Hz～65 Hz 0.5% +30 65 Hz～1 KHz 0.7% +30 DC Current 500 uA 0.01 uA 0.15% +20 5000 uA 0.1 uA 0.15% +10 50 mA 0.001 mA 0.15% +20 500 mA 0.01 mA 0.15% +10 5 A 0.0001 A 0.5% +10 10 A 0.001 A 0.5% +10 AC Current 500 uA～500 mA 20 Hz～1 KHz 0.5% +20 5 A-10 A 1.5% +20 Resistance 500 Ω 0.01 Ω 0.15% +10 5 KΩ 0.0001 KΩ 0.15% +5 50 KΩ 0.001 KΩ 0.15% +5 500 KΩ 0.01 KΩ 0.15% +5 5 MΩ 0.0001 MΩ 0.3% +5 50 MΩ 0.001 MΩ 1% +10 Frequency 10.000 Hz～60 MHz / ±(0.2% +10) Capacitance 50 nF～500 uF / 2.5% +10 5 mF～50 mF 5% +10 Diode 3.0000 V 0.0001 V / Continuity 1000 Ω 0.1 Ω Adjustable threshold Temperature K type, PT100 Max Display 55,000 counts Data-logging Function Logging Duration 15ms～9999.999s Logging Length 1,000 points Display 3.5' TFT LCD (480x320 pixels) Power supply Lithium battery via USB-C or 5 V DC input Dimensions 235 x 88 x 65 mm Weight approx. 0.5 kg Included 1x OWON XDM1241 Multimeter 2x Test leads 1x USB cable 1x USB to DC cord 1x Manual Downloads Programming Manual PC Software

Read more less

The OWON XDS3102A is a 12-bit 2-channel digital storage oscilloscope (100 MHz) with digital multimeter and 2-channel arbitrary waveform generator (25 MHz). It features a touchscreen, a VGA output, WiFi and a 13200 mA battery. Performance 8-bit, 12-bit or 14-bit high-resolution ADC, restoring the waveform detail fully 40M record length, max 75,000 wfms/s waveform refresh rate Ow background noise, vertical sensitivity in 1 mV/div - 10 V/div Multi-trigger, and bus decoding function SCPI and LabVIEW supported Features Ultra-thin body-design, less space accommodation Multi-interface integration – USB host, USB device, USB port for PictBridge, LAN, AUX, and more VGA port – a better solution for video expansion, and teaching demonstration 8 inch 800 x 600 high-resolution LCD Optional multi-point touch screen, more user-friendly operation experience Specifications Bandwidth 100 MHz Sample Rate 1 GS/s Vertical Resolution (A/D) 12 bits Record length 40M Horizontal Scale (s/div) 2 ns/div - 1000s/div, step by 1 - 2 - 5 Channel 2 + 1 (external) Display 8" color LCD, 800 x 600 pixels Waveform Math   ＋, －, ×, ÷, FFT, FFTrms, Intg, Diff, Sqrt, User Defined Function, digital filter (low pass, high pass, band pass, band reject) Trigger Type Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I²C, SPI, RS232 Bus Decoding I²C, SPI, RS232 Communication Interface USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN Power Supply 100-240 V AC, 50/60 Hz, CAT II Power Consumption ＜15 W Fuse 2A, T class, 250 V Dimension 340 x 177 x 90 mm Weight 2.6 kg

Read more less

The PCW03A True RMS digital multimeter is an innovative tool for any electrician, technician, or ambitious hobbyist. It can measure AC/DC voltage, current, and resistance, as well as frequency, duty ratio, and temperature. Due to its smart measurement function, the PCW03A detects the inteded measurement (continuity, voltage, resistance) and chooses the correct measurement range/function for the user, making super easy to use and beginner-friendly. Another great feature of the device, especially for beginners, are the illuminated input sockets. Here the device indicates which input sockets to use for the chosen measurement function. This way it is almost impossible to connect the measurement leads to the wrong socket and it will prevent the device from damage. With its 9999 counts and bright colors, the HD display provides precise measurement read-outs. Additionally, the CAT III 1000V; CAT IV 600V rating ensures safety while in use for various applications. Its smartphone-like design is easy and intiutive to use, making it a joy for daily operations. The double insulation, ceramic fuse, and removable rubber casing provide durability and protection for device and the user. Features CAT III 1000V; CAT IV 600V 9999 counts & True RMS Auto Range & smart measurement function: device automatically recognizes intended measurement (continuity, voltage, resistance) and chooses correct measurement range/function LED illuminated input sockets – the device shows you which input socket to use according to the measurement function chosen. Perfect for beginners to avoid damage to the device. AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty ratio, and temperature measurement NCV (non-contact voltage detection), live line, continuity, and diode test Double insulation & ceramic fuses Removable rubber casing with cushioning function for extra protection Large colour HD display with backlight Data hold with Min/Max function LED work light Innovative design and 5 button operating concept: like a smartphone Great packaging design and manual with pictures in various languages: EN, GER, ES, FR, PT, IT, GR Dimensions: 165 x 85 x 25 mm Weight: 255 g Included PCW03A Multimeter Batteries High-quality test leads K-type temp. probes Transport case

Read more less

UT196 True RMS solar digital multimeter is an ideal tool for solar power system maintenance. This rugged meter is designed for technicians who work in rugged outdoor environments. UT196 can measure up to 1700 V DC and 1500 V AC voltages, and 3000 A AC current with an external current clamp sensor. This solar meter offers IP65 protection and able to withstand 2 m drop as well. UT196 solar digital multimeter is designed with 1700 V DC, 1500 Vrms AC overload protection and tested for safe usage in CAT III 1000 V, CAT IV 600 V environments. Features True RMS Measure up to 1700 V DC and 1500 V AC for high voltage applications e.g. solar array, wind IP65 protection CAT III 1000V, CAT IV 600 V Analog bar Frequency response: 45 Hz~1 kHz Low-pass filter function Low impedance mode Built-in flashlight, bright backlight and visual alarm Applications High DC voltage measurement Output voltage and frequency measurement Voltage and frequency measurement Current and frequency measurement Specifications Range UT196 DC voltage (V) 1700 V ±0.2% +5 AC voltage (V) 1500 V ±0.8% +3 Frequency (Hz) 1 MHz ±0.08% +4 Resistance (Ω) 60 MΩ ±0.8% +2 Capacitance (F) 60 mF ±1.9% +5 Power 9 V battery Dimensions 195 x 95 x 58 mm Included UT196 Solar Digital Multimeter Battery Test leads Downloads Datasheet Manual

Read more less

The PeakTech 3445 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions.As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness.In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.Through these many technical qualities, this device is suitable for the outdoor use of every electrician, technician and engineer in the service, construction or industrial sector.Features Automatic illuminated functions keys and rotary switch Integrated powerful LED Flashlight Bleutooth 4.0 interface for data transfer to Android or iOS smartphones TrueRMS measurement ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z) 3 5/6-digits measurement value display (max. 5999) LCD-Display with Relative-value measurement and 42-segment bargraph Continuity with buzzer and diode-test Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %) Heavy Duty Case, IP67 dust- and waterproof Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V Accessories: Carrying case, Test Leads, K-type Specifications DCV 600 mV / 6 / 60 / 600 / 1000 V +/-0,8% + 5 dgt. ACV + DCV @ 10 MΩ 6 / 60 / 600 / 1000 V +/-1,5% + 20 dgt. ACV + DCV @ 3 kΩ (LO Z) 6 / 60 / 600 / 1000 V +/-3% + 30 dgt. ACV + DCV Frequency range 50 Hz … 400 Hz ACV 6 / 60 / 600 / 1000 V +/-1% + 5 dgt. ACV Frequency range 50 Hz … 1000 Hz DCA 600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt. ACA 600 / 6000 µA / 60 / 600 mA / 10 A +/-1% + 3 dgt. ACA Frequency range 50 Hz … 400 Hz Ohm 600 Ω / 6 / 60 / 600 kΩ / 6 / 60 MΩ +/- 1,5% + 5 dgt. Capacitance 60 / 600 nF / 6 / 60 / 600 / 6000 µF +/-3% + 5 dgt. Frequency 10 Hz … 10 kHz +/- 1,0% + 5 dgt. Temperature 20.0 °C … +760 °C +/-1,0% + 5 °C Interface Bluetooth 4.0 Low Energy Operating Voltage 4 x 1,5 V AAA Batteries Dimensions (WxHxD) 75 x 170 x 50 mm Weight 400 g

Read more less

The OWON HDS2202s is a portable 3-in-1 multifunctional tester, which can be used as a 2-ch oscilloscope with a bandwidth of 200 MHz, multimeter and signal generator. It features a high-contrast 3.5-inch color display suitable for outdoor facility maintenance, rapid on-site measurement, automobile maintenance, power detection. etc. Features Oscilloscope + multimeter + waveform generator, multifunction in one 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use 18650 lithium battery, can work continuously for 3-6 hours USB Type-C interface, support power bank, support PC software connection Self-calibration function SCPI supported, facilitate secondary development Specifications Bandwidth 200 MHz Channels 2-ch Oscilloscope + 1-ch Generator Sample Rate 1 GSa/s Acquisition Model Normal, Peak detect Record Length 8K Display 3.5-inch LCD Waveform Refresh Rate 10,000 wfrms/s Input Coupling DC, AC, and Ground Input Impedance 1 MΩ ±2%, in parallel with 16pF ±10pF Probe Attenuation Factors 1X,10X,100X,1000X,10000X Max. input Voltage 400 V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation) Bandwidth Limit (typical) 20 MHz Horizontal Scale 2ns/div - 1000s/div, step by 1 - 2 - 5 Vertical Sensitivity 10mV/div - 10V/div Vertical Resolution 8 bits Trigger Type Edge Trigger Modes Auto, Normal, single Automatic Measurement Frequency, Period, Amplitude, Max, Min, Mean, PK-PK Cursor Measurement ΔV, ΔT, ΔT&ΔV between cursors Communication Interface USB Type-C Multimeter Specifications Max. Resolution 20,000 counts Testing Mode Voltage, Current, Resistance, Capacitance, Diode, and Continuity test Input Impedance 10 MΩ Max Input Voltage AC 750 V, DC 1000 V Max Input Current DC: 10 A, AC: 10 A Diode 0-2 V Waveform Generator Specifications Frequency Output Sine 0.1 Hz - 25 MHz Square 0.1 Hz - 5MHz Ramp 0.1 Hz - 1 MHz Pulse 0.1 Hz - 5 MHz Arbitrary 0.1 Hz - 5 MHz Sampling Rate 125 MSa/s Channel 1-ch Amplitude Range (high impedance) 20 mVpp - 5 Vpp Waveform Length 8K Vertical Resolution 14 bits Output Impedance 50Ω Included 1x OWON HDS2202s 1x Power adapter 1x USB cable 1x Passive probes 2x Crocodile clip cable 1x Set of multimeter probes (one red and one black) 1x User manual 1x Probe correction adjustment knife Downloads User Manual Specifications SCPI Protocol Quick Guide Software

Read more less

Otii Arc is the ultimate developer tool for designing highly energy-efficient devices. It is an easy-to-use, all-in-one, featured-packed tool for every developer's table.It records currents and voltages and displays them in real-time as charts and interactive measurements for analysis and comparisons. Recordings can be synchronized with UART debug logs, giving insights into what drains the energy.Otii Arc is compact, portable, and powered via USB from your laptop (DC supply is optional). It comes with a lifetime subscription of Otii software (standard version), a powerful and easy-to-use desktop application for Ubuntu, Windows & macOS, download here. Channels 10 Sampling Rate 4 kSa/s Main Current (<19.5mA) 1 kSa/s other channels Power Supply Voltage 5 V USB optional 7 V - 9 V DC, up to 5 A Power Consumption < 1 W Operating Temperature 15 °C – 25 °C Storage Temperature -20 °C - 60 °C Cooling Method Convection Dimensions 145 mm x 110 mm x 50 mm Weight 500 g Maximum Measurement Length No limits Testing Modes Main Voltage, Main Current, ADC Voltage, ADC Current, Sense+ Voltage, Sense- Voltage, GPI1 level, GPI2 level, UART RX, UART TX Maximum Output Voltage 3.75 V (USB supply, auto range) 4.20 V (USB supply, high range) 4.55 V (DC supply, auto range) 5.00 V (DC supply, high range) Maximum Output Current 5.0 A peak 2.5 A continuous Maximum Input Voltage 5 V on any pin Maximum Input Current 2.5 A sink capability Range Accuracy Resolution Voltage 5 V ±（0.1% + 1.5 mV) 1 mV Current ±19.5 mA±2.7 A2.7 A - 5.0 A ±（0.1% + 50 nA)±（0.1% + 150 uA)±（1%) 5 nA82 uA1.5 mA For more information, click here.Included Qoitech OTii ARC USB to micro-USB cable

Read more less

The UT8803E is a 6000 counts 3⅚ digital, automatic range, portable desktop, AC powered digital multimeter. Large screen large character display with backlight, more clear and easy to read. UT8803E can be used to measure AC/DC voltage, AC/DC current, resistance, frequency, capacitance, inductance, triode HFE, diode (LED), thyristor (SCR) and circuit on-off. Features Extreme value operation and reference value operation function, with analog bar Multiple measurement items optional D/Q parameters of capacitance and inductance can be measured Reading resolution 3⅚, maximum reading 5999 Specifications Reading resolution 3⅚, maximum reading 5999 Measuring rate 2~3 reading/s DC voltage range 600 mV～1000 V DC current range 600 µA～20 A AC voltage range 600 mV～750 V (True-RMS) AC current range 600 µA～20 A (True-RMS) Resistance range 600 Ω～60 MΩ Capacitance range 6 nF～60 mF Inductance range 600 µH～100 H Frequency measurement range 600 Hz～20 MHz Duty cycle measurement range 5%~95% Mathematical operation Maximum, minimum, relative value, trend chart Interface USB device (it can be connected to the upper computer control software) Frequency response 100 KHz Downloads Datasheet User Manual Programming Manual Software

Read more less

Features 2-in-1 station: Oscilloscope + 3¾ digits multimeter + FFT spectrum analyzer Auto-scale Function: While in auto-scale status, the oscilloscope will switch to the specific trigger mode, vertical scale, and timebase scale according to the type, amplitude, and frequency of the input signal. Trigger Sensitivity Adjustable: While in auto-scale status, the oscilloscope will switch to the specific trigger mode, vertical scale, and timebase scale according to the type, amplitude, and frequency of the input signal. Alternative trigger function: OWON HDS digital oscilloscope alternative trigger function support two simultaneous signal test, improve working efficiency. Rechargeable Li-ion battery (6 hours' backup) Multimeter newly supported SCPI USB data transmission supported Bandwidth: 20 MHz – 200 MHz 20 group automatic measurement options Waveform record & restore

Read more less