IoT & LoRa

3 products


  •  -40% SparkFun RFID Qwiic Reader

    SparkFun SparkFun RFID Qwiic Reader

    Plug a reader into the headers, use a Qwiic cable, scan your 125kHz ID tag, and the unique 32-bit ID will be shown on the screen. The unit comes with a read LED and buzzer, but don't worry, there is a jumper you can cut to disable the buzzer if you want. Utilizing SparkFun's handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1'-spaced pins if you prefer to use a breadboard. Utilizing the onboard ATtiny84A, the Qwiic RFID takes the six byte ID tag of your 125kHz RFID card, attaches a timestamp to it, and puts it onto a stack that holds up to 20 unique RFID scans at a time. This information is easy to get at with some simple I²C commands.

    € 24,95€ 14,95

    Members identical

  • SparkFun RFID Qwiic Kit

    SparkFun SparkFun RFID Qwiic Kit

    This kit comes with everything you need to get started. The SparkFun RFID Qwiic Reader, an ID-12LA reader, a couple of RFID cards, and a cable to get you hooked up. Just plug this into any Qwiic enabled development board, and you are good to go. Utilizing the onboard ATtiny84A, the Qwiic RFID takes the six byte ID tag of your 125kHz RFID card, attaches a timestamp to it, and puts it onto a stack that holds up to 20 unique RFID scans at a time. This information is easy to get at with some simple I²C commands. The unit comes with a read LED and buzzer, but don't worry, there is a jumper you can cut to disable the buzzer if you want. Features Mates with three ID-XXLA RFID Modules ID-3LA ID-12LA ID-20LA 125kHz Read Frequency Scan range of 5-6 inches Buzzer and blue LED scan indicator Address Jumper Buzzer disconnect Jumper Interrupt disconnect Jumper Included 1 x SparkFun RFID Qwiic Reader 1 x RFID Reader ID-12LA (125kHz) 2 x RFID Tag (125kHz) 1 x Qwiic Cable - 100mm

    € 69,95

    Members € 62,96

  • SparkFun Thing Plus Matter (MGM240P)

    SparkFun SparkFun Thing Plus Matter (MGM240P)

    The SparkFun Thing Plus Matter is the first easily accessible board of its kind that combines Matter and SparkFun’s Qwiic ecosystem for agile development and prototyping of Matter-based IoT devices. The MGM240P wireless module from Silicon Labs provides secure connectivity for both 802.15.4 with Mesh communication (Thread) and Bluetooth Low Energy 5.3 protocols. The module comes ready for integration into Silicon Labs' Matter IoT protocol for home automation.What is Matter? Simply put, Matter allows for consistent operation between smart home devices and IoT platforms without an Internet connection, even from different providers. In doing so, Matter is able to communicate between major IoT ecosystems in order to create a single wireless protocol that is easy, reliable, and secure to use.The Thing Plus Matter (MGM240P) includes Qwiic and LiPo battery connectors, and multiple GPIO pins capable of complete multiplexing through software. The board also features the MCP73831 single-cell LiPo charger as well as the MAX17048 fuel gauge to charge and monitor a connected battery. Lastly, a µSD card slot for any external memory needs is integrated.The MGM240P wireless module is built around the EFR32MG24 Wireless SoC with a 32-bit ARM Cortext-M33 core processor running at 39 MHz with 1536 kb Flash memory and 256 kb RAM. The MGM240P works with common 802.15.4 wireless protocols (Matter, ZigBee, and OpenThread) as well as Bluetooth Low Energy 5.3. The MGM240P supports Silicon Labs' Secure Vault for Thread applications.Specifications MGM240P Wireless Module Built around the EFR32MG24 Wireless SoC 32-bit ARM-M33 Core Processor (@ 39 MHz) 1536 kB Flash Memory 256 kB RAM Supports Multiple 802.15.4 Wireless Protocols (ZigBee and OpenThread) Bluetooth Low Energy 5.3 Matter-ready Secure Vault Support Built-in Antenna Thing Plus Form-Factor (Feather-compatible): Dimensions: 5.8 x 2.3 cm (2.30 x 0.9') 2 Mounting Holes:4-40 screw compatible 21 GPIO PTH Breakouts All pins have complete multiplexing capability through software SPI, I²C and UART interfaces mapped by default to labeled pins 13 GPIO (6 labeled as Analog, 7 labeled for GPIO)All function as either GPIO or Analog Built-in-Digital to Analog Converter (DAC) USB-C Connector 2-Pin JST LiPo Battery Connector for a LiPo Battery (not included) 4-Pin JST Qwiic Connector MC73831 Single-Cell LiPo ChargerConfigurable charge rate (500 mA Default, 100 mA Alternate) MAX17048 Single-Cell LiPo Fuel Gauge µSD Card Slot Low Power Consumption (15 µA when MGM240P is in Low Power Mode) LEDs: PWR – Red Power LED CHG – Yellow battery charging status LED STAT – Blue status LED Reset Button: Physical push-button Reset signal can be tied to A0 to enable use as a peripheral device Downloads Schematic Eagle Files Board Dimensions Hookup Guide Datasheet (MGM240P) Fritzing Part Thing+ Comparison Guide Qwiic Info Page GitHub Hardware Repo

    € 34,95

    Members € 31,46

What is the Internet of Things (IoT)?

The Internet of Things, or IoT, is a system of interconnected computing devices, physical objects with sensors, processing power, software, and other technologies that have unique identifiers (UID). The IoT network deals with communication between machines, device identification, and communication. Therefore, choosing the best wireless network based on the IoT specifications is essential.

IoT devices can transfer data over a network without the need for human-to-human or human-to-computer interaction. As a result, users may experience difficulties with security, integration, process capability, scalability, and accessibility. Solving these problems requires a smart approach to IoT device management.

What are LoRa and LoRaWAN?

LoRa enables transmissions over very long distances (more than 10 km in rural areas) with low power consumption. It is a widely used technology for IoT networks worldwide. Thanks to LoRa technology, we can solve some of the world's biggest problems: energy management, natural resource reduction, environmental protection, infrastructure efficiency, disaster relief, and more.

However, the low bandwidth of LoRa cannot be used for just any application. Due to limitations in the frequency range it uses, the protocol is unable to transmit continuously.

LoRaWAN is a low-power, wide area networking protocol built on LoRa radio modulation technology. It connects devices wirelessly to the Internet and manages communications between end-node devices and network gateways. Thus, LoRaWAN defines the communication protocol and system architecture for the network, while the physical layer of LoRa enables the long-distance communication link, with the help of the gateway.

The gateway helps to realize transmission from an electrical device to the cloud, especially in environments where other types of networks are not usable due to technical limitations.

What can you do with LoRa technology? What does Elektor offer? What accessories are there?

LoRa is an excellent choice for indoor use in a broad spectrum of applications, including smart cities, buildings, agriculture, metering, healthcare, and logistics. It is safe, bidirectional, low-power, and has a long range.

Accessories help users optimize their IoT setups. Elektor offers a wide choice of components, including gateways, RFID readers, IoT shields, and different types of sensors (e.g. temperature, position, and humidity) to meet the diverse needs of a wide range of customers.

The future of LoRa

LoRa will help reduce the costs of creating IoT solutions and enable large-scale IoT applications. It is expected to play a key role as a communications network. For example, we expect it to be used for a wide range of applications, such as numerous smart lighting systems, hydropower usage tracking, and industrial data monitoring and analysis.

Login

Forgot password?

Don't have an account yet?
Create an account