Bestsellers

The Waveshare 400 GPIO Header Extension is designed for Raspberry Pi 400 and provides a color-coded header and easy expansion. Features Designed for Raspberry Pi 400 Color-Coded Header Easy Expansion Included 1x PI400-GPIO-ADAPTER-B 1x Screws pack

Read more less

Features SPI-compatible, easy to drive Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Operating voltage 5 V Digits 4 Dispaly size 0.4 inch LED color red Driver 74HC595 Display part no. FJ4401AH Dimensions 52 × 21 mm

Read more less

The ETH-USB-Hub-Box is a Hub kit with ETH/USB Hub HAT (B) inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. This Hub Box will provide RJ45 Ethernet port and more USB capability for your Zero, make it easy to connect the Internet and sorts of USB devices. Features Designed for Raspberry Pi Zero, compatible with Zero series boards 3x extended USB ports, compatible with USB 2.0 / 1.1 Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH Angle rounded design, smooth hand feeling, 'simple snap' case lid Quality ABS material, dull polish surface, anti-fingerprint Comes with two different lids, changing as you like Included 1x ETH/USB Hub HAT (B) 1x ABS case 1x Rubber feet 4pcs 1x Screws pack 1x Screwdriver Downloads Documentation

Read more less

The Pico-Eval-Board is an overall evaluation solution designed for Raspberry Pi Pico. With 3.5-inch 65K colorful LCD display and misc helpful onboard components, this evaluation board allows you to try almost every on chip peripheral of the RP2040, eliminating the mess wiring. It is an ideal choice for user to fast get started with the Raspberry Pi Pico, as well as the RP2040 chip. Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards 3.5-inch resistive touch screen, 65K colorful, bringing clear and vivid display effect Standard 3.5 mm audio jack, for headphone or other audio peripherals Micro SD card slot through the SDIO interface, faster access speed than SPI interface Integrates battery header and recharge circuit, allows it keep running without wired power supply Other rich resources like buzzer, photoresistor, and RGB LED... Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) LCD Specifications Operating voltage 5 V Resolution 480×320 Pixels Touch type resistive Display colors 65K colorful Communication bus SPI Display size 73.44 × 48.96 mm Display panel IPS Pixel size 0.153 × 0.153 mm Controller ILI9488/XPT2046 Dimension 86.00 × 57.20 mm

Read more less

Features 480 x 320 resolution, IPS screen, 65K colors, clear and colorful displaying effect Dedicated touch controller, bringing more smooth touching effect than AD-controlled solutions MicroSD card slot for storing images and direct displaying them easily Programmable backlight control, power saving Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Operating voltage 5 V Resolution 480 x 320 pixels Communication interface SPI Display size 73.44 x 48.96 mm Display panel IPS Pixel size 0.153 x 0.153 mm Driver ILI9488 Dimensions 86.00 x 57.20 mm Touch controller XPT2046 Downloads Wiki

Read more less

Features Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires Two sets of 2x20 male header, allows connecting more Raspberry Pi Pico expansion modules Clear pinout labels on the front side, easy to use Immersion gold process, beautiful & practical, stunning aesthetic looking

Read more less

The Pico-Clock-Green is an LED digits electronic clock designed for Raspberry Pi Pico. It incorporates high precision RTC chip DS3231, photosensor, buzzer, and buttons, features multiple functions including accurate electronic clock, temperature display, auto brightness adjustment, alarm, and button config. The important part is, rich open source codes and development tutorials are also provided to help you fast get started with Raspberry Pi Pico and make your own original electronic clock. Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Onboard high precision RTC chip DS3231, with backup battery holder, maintains accurate timekeeping when main power is off Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100 Optional format: 24-hour OR 12-hour with an AM/PM indicator 2x programable alarm clock Digital temperature sensor output: ±3°C accuracy Embedded photosensor for auto brightness adjustment due to the ambient light, power saving and eye care Embedded buzzer for alarm or hourly ring, etc. 3x buttons for configuration Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Scrolling display Alarm/hourly ring Temperature in °F or °C format 12/24 time format Day of week auto adjustment Timekeeping without main power Timer configuration Manual/auto brightness adjustment Button configuration Program/debug port: USB Power supply: 5 V via USB connection Outline dimensions: 216 × 79 × 25 mm Display size: 190 × 60 mm LED digit: jade green Included 1x Pico-Clock-Green 1x Case 1x USB-A to micro-B cable 1.2 m 1x Button cell CR2032 1x Screws pack

Read more less

Features Advanced Color ePaper (ACeP) technology, supports 7-color display No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3/5 V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Specifications Operating voltage 3.3/5 V Display color ACeP 7-Color Interface 3-wire SPI, 4-wire SPI Grey scale 2 Outline dimensions 138.5 x 100.5 mm Full refresh time <35s Display size 114.9 x 85.8 mm Refresh power 50 mW (typ.) Dot pitch 0.1915 x 0.1915 mm Standby time <0.01 uA (almost none) Resolution 600 x 448 pixels Viewing angle >170° Downloads Wiki

Read more less

Features 2.13' capacitive touch e-Paper display, 5-point touch, 250×122 pixels Supports waken up by user-defined gesture No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W Comes with development resources and manual (examples for Raspberry Pi) Included 1x 2.13inch Touch e-Paper HAT 1x ABS case 1x Screwdriver 1x Thermal tape 1x Rubber feet 4pcs 2x Screws Downloads Documentation

Read more less

The Pico-GPS-L76B is a GNSS module designed for Raspberry Pi Pico, with multi satellite systems support including GPS, BDS, and QZSS. It has advantages such as fast positioning, high accuracy, and low power consumption, etc. Combined with the Raspberry Pi Pico, it's easy to use global navigating function.Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards Multi satellite systems support: GPS, BDS, and QZSS EASY, self track prediction technology, help quick positioning AlwaysLocate, intelligent controller of periodic mode for power saving Supports D-GPS, SBAS (WAAS/EGNOS/MSAS/GAGAN) UART communication baudrate: 4800~115200bps (9600bps by default) Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts 4x LEDs for indicating the module operating status Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications GNSS Frequency band:GPS L1 (1575.42 Mhz)BD2 B1 (1561.098 MHz) Channels: 33 tracking ch, 99 acquisition ch, 210 PRN ch C/A code SBAS: WAAS, EGNOS, MSAS, GAGAN Horizontal position accuracy(autonomous positioning) <2.5 m CEP Time-To-First-Fix @ -130 dBm(EASY enabled) Cold starts: <15s Warm starts: <5s Hot starts: <1s Sensitivity Acquisition: -148 dBm Tracking: -163 dBm Re-acquisition: -160 dBm Dynamic performance Altitude (max): 18000 m Velocity (max): 515 m/s Acceleration (max): 4 g Others Communication interface UART Baudrate 4800~115200bps (9600bps by default) Update rate 1 Hz (default), 10 Hz (max) Protocols NMEA 0183, PMTK Power supply voltage 5 V Operating current 13 mA Overall current consumption < 40 mA@5 V (Continue mode) Operating temperature -40℃ ~ 85℃ Dimensions 52 × 21 mm Included 1x Pico-GPS-L76B 1x GPS Antenna

Read more less

Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, requires minimal IO pins Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Operating voltage 3.3 V Display color red, black, white Interface 3-wire SPI, 4-wire SPI Grey scale 2 Outline dimensions 74.00 × 37.5 0mm Full refresh time 15s Display size 60.088 × 30.704 mm Refresh power 42.4 mW (typ.) Dot pitch 0.203 × 0.202 mm Standby current <0.01 uA (almost none) Resolution 296×152 pixels Viewing angle >170° Downloads Wiki

Read more less

Features Adopts both 4-wire SPI and I²C interface, better compatibility, fast data rate Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Logical voltage 3.3 V Viewing angle >160° Operating voltage 3.3 V/5 V Resolution 128×32 pixels Communication interface 4-wire SPI, I²C Display size 55.02 × 13.10 mm Display panel OLED Pixel size 0.41 × 0.39 mm Driver SSD1305 Dimensions 63.00 × 26.00 mm

Read more less

This Industrial 6-Channel Relay Module is suitable for Raspberry Pi Zero with pre-soldered pinheader. It provides RS485/CAN Bus, Power Supply Isolation, and Photocoupler Isolation.Features RS485 half-duplex communication: using SP3485, UART control, auto RX/TX switch CAN half-duplex communication: using MCP2515 + SN65HVD230 solution, SPI control Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal Onboard photocoupler isolation, prevent interference from external high-voltage circuit connected to the relay Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic Onboard resettable fuses and protection diodes, ensuring current/voltage stable output, preventing over current/voltage, better shock-resistance performance High quality relay, contact rating: ≤10A 250V AC or ≤10A 30V DC ABS protection enclosure with rail-mount support, easy to install, safe to use Comes with development resources and manual (wiringPi and python examples) Specifications Operating voltage: 7~36 V (industrial input voltage compatible) Relay channel: 6ch Communication Protocol: RS485, CAN Contact form: 1NO 1NC Included 1x ABS protection enclosure (top and bottom) 1x RPi Zero Relay 1x Screwdriver 1x OPTIONS 12 V, 1 A power adapter 1x Screws pack DownloadsDocumentation

Read more less

The Pico-10DOF-IMU is an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I²C bus for communication. Combined with the Raspberry Pi Pico, it can be used to collect environment sensing data like temperature and barometric pressure, or to easily DIY a robot that detects motion gesture and orientation. Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Onboard ICM20948 (3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer) for detecting motion gesture, orientation, and magnetic field Onboard LPS22HB barometric pressure sensor, for sensing the atmospheric pressure of the environment Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications Operating voltage 5 V Accelerometer Resolution: 16-bitMeasuring range (configurable): ±2, ±4, ±8, ±16gOperating current: 68.9uA Gyroscope Resolution: 16-bitMeasuring range (configurable): ±250, ±500, ±1000, ±2000°/secOperating current: 1.23mA Magnetometer Resolution: 16-bitMeasuring range: ±4900µTOperating current: 90uA Baroceptor Measuring range: 260 ~ 1260hPaMeasuring accuracy (ordinary temperature): ±0.025hPaMeasuring speed: 1Hz - 75Hz

Read more less

Specifications CM4 socket Suitable for all variants of Compute Module 4 Networking Gigabit Ethernet RJ45 connectorM.2 M KEY, supports communication modules or NVME SSD Connector Raspberry Pi 40-PIN GPIO header USB 2x USB 2.0 Type A2x USB 2.0 via FFC connector Display MIPI DSI display port (15-pin 1.0 mm FPC connector) Camera 2x MIPI CSI-2 camera port (15-pin 1.0 mm FPC connector) Video 2x HDMI port (including one port via FFC connector), supports 4K 30fps output RTC N/A Storage MicroSD card socket for Compute Module 4 Lite (without eMMC) variants Fan header No fan control, 5 V Power input 5 V Dimensions 85 x 56 mm Included 1x CM4-IO-BASE-A 1x SSD mounting screw Downloads Wiki

Read more less

Features No backlight Displays last images even when powered down Ultra low power consumption SPI interface Compatible with 3.3 V and 5 V Specifications Operating voltage 3.3 V / 5 V Interface 3-wire SPI, 4-wire SPI Outline dimension 89.5 x 38 mm Display size 66.89 x 29.05 mm Dot pitch 0.138 x 0.138 Resolution 296 x 128 Display color red, black, white Grey level 2 Full refresh time 15 s Refresh power 26.4 mW Standby power <0.017 mW Viewing angle >170° For more information check out the waveshare wiki here.

Read more less

The Solar Power Manager is compatible with general 6~24 V solar panels. It can recharge the 18650 rechargeable Li-ion batteries through solar panel or USB TYPE-C connection, and provides 5 V/3 A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP). The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects. Features Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel Flexible battery recharging: from solar panel or USB-C power adapter Compatible with 6~24 V solar panels, DC-002 jack input or screw terminal input Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance Embedded battery holder, supports 3x 18650 rechargeable Li-ion batteries Several LED indicators, for monitoring the status of solar panel and battery Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to use Specifications Solar In 6~24 V (1 V by default) Recharging USB Battery 3x 18650 Li-ion battery (NOT included) USB input 5 V (USB-C, with PD quick charge support) 5 V output 5 V/3 A (USB-OUT, USB-C) Recharging cutoff voltage 4.2 V ±1％ Over discharging protection voltage 3.0 V ±1％ Solar panel recharging efficiency ~78% USB recharging efficiency ~93% Batteries boost outout efficiency ~90% Quiescent current (max) <2 mA Case Metal case Operating temperature -40°C ~ 85°C Dimensions 119.0 x 71.0 x 25.2 mm Included 1x Solar Power Manager (C) 1x Adapter Downloads Wiki

Read more less

This is an I/O expansion kit designed for Raspberry Pi, which provides 5 sets of 2x20 pinheaders, that means a handy way to 'stack' multi different HATs together, and use them as a specific combination / project. Features Standard Raspberry Pi connectivity, directly pluggable OR through ribbon cable 5 sets of 2x20 pinheaders, connect multi HATs together USB external power port, provides enough power supply for multi HATs Clear and descriptive pin labels for easy use Reserved jumper pads on the bottom side, pin connections are changeable by soldering, to avoid pin conflicts Note: make sure there are no any pin conflicts between the HATs you want to use together before connecting. Specifications Dimensions: 183 × 65 mm Mounting hole size: 3 mm Included 1x Stack HAT 1x Ribbon cable 40-Pin 1x 2x20 male pinheader 1x RPi screws pack (4pcs) x1

Read more less

This polysilicon solar panel (18 V/10 W) provides stable performance with a high conversion efficiency of >20%. Specifications Solar cell type Polysilicon Output power tolerance ±3% Operating voltage 17.6 V Open circuit voltage 21.6 V Cell quantity 36 (4x9) Power 10 Wp (max) Conversation efficiency >20% Operating current 0.57 A Short circuit current 0.61 A Standard system voltage 1000 V (Max) Operating temperature -40°C ～ +85°C Pressure on panel 30 m/s (200 kg/sq.m) (Max) Cable Length 90 cm, DC plug, OD 3.5 mm ID 1.35 mm Frame material Anodic oxidation aluminum alloy Dimensions 340 x 232 x 17 mm Weight 0.935 kg

Read more less

The USB-CAN-FD is an industrial-grade high-performance USB to CAN-FD adapter, CAN/CAN-FD bus communication interface card, and CAN/CAN-FD protocol data analyzer. Onboard dual independent CAN-FD interfaces with electrical isolation and multiple protection circuits. Supports Windows system, comes with drivers, CAN-FD Tools related software, secondary development examples, and tutorials. It can be connected to the PC or industrial control host via a USB port to realize transceiver control, data analysis, collection and monitoring of CAN/CAN-FD bus network. It is compact in size and easy to use, which can be used for learning and debugging of CAN/CAN-FD bus, as well as for secondary development and integration into various industrial, power communication, and intelligent control applications that require CAN/CAN-FD bus communication. Specifications Product type Industrial grade: USB to CAN-FD interface converter, CAN/CAN-FD bus communication interface card, CAN/CAN-FD protocol data analyzer USB Operating voltage 5 V (directly powered by USB port without external power supply) Connector USB-B CAN/CAN FD interface CAN/CAN FD channel Dual-channel: CAN1 and CAN2 (independent and full-isolated, isolated voltage: 3000 V DC) Connector CAN bus screw terminal (OPEN6 5.08 mm pitch) Terminal resistor Each CAN/CAN-FD channel has two built-in 120Ω terminal resistors, which can be enabled by switch Baud Rate 100Kbps~5Mbps (configurable via software) Protocol Support CAN2.0A, CAN2.0B, and ISO 11898-1 CAN-FD protocol V.1.0 Transfer speed The receiving and sending speed of each CAN/CAN-FD channel can reach 20000 frames/s and 5000 frames/s Transmit buffer 1500 frames receiving buffer and 64 frames sending buffer per channel (automatically retransmit when the transmission fails) Indicators PWR Power indicator SYS System status indicator, normally off; keeps on when there is a bus error CAN1 CAN1 channel indicator (blinking when sending and receiving data) CAN2 CAN2 channel indicator (blinking when sending and receiving data) System support Windows Windows XP/7/8/10/11 (32/64 bits); Does Not support the Linux system now, and the related drivers are under development. Operating temperature −40 to +85°C Case material Aluminum alloy case + 3D flame-retardant insulating sheets on both sides (This design can provide better protection against metal tip discharge, also improves product safety, and extends service life) Dimensions 104 x 70 x 25 mm Included Waveshare USB-CAN-FD USB-A to USB-B cable 4-pin cable Screwdriver Downloads Wiki

Read more less

This solar power management module is designed for 6~24 V solar panel. It can charge the 3.7 V rechargeable Li battery through solar panel or USB connection, and provides 5 V/1 A or 3.3 V/1 A regulated output. The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep working with high-efficiency, stability, and safety. It is suited for solar powered, low-power IoT, and other environmental protection projects. Features Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel Supports solar panel / USB connection battery charging For 6~24 V solar panel, DC-002 jack input or screw terminal input Onboard MPPT SET switch, select the level closed to input level to improve charging efficiency Onboard two power output interfaces: USB port for 5 V output, pinheader for 3.3 V or 5 V output Onboard high capacity aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance 14500 battery holder and PH2.0 battery connector, for connecting multi kinds of 3.7 V rechargeable Li battery Several LED indicators, for monitoring the status of solar panel and battery Multi protection circuits: over charge / over discharge / reverse protection / over heat / over current, stable and safe to use Specifications Solar In 6~24 V (6 V by default) Recharging USB Battery 3.7 V 850mAh 14500 Li-ion battery (NOT included) USB input 5 V (Micro USB) 5 V output 5 V/1 A (USB OUT, pin header) 3.3 V/1 A (pin header) Recharging cutoff voltage 4.2 V ±1％ Over discharging protection voltage 2.9 V ±1％ Solar panel recharging efficiency ~78% USB recharging efficiency ~82% Batteries boost outout efficiency ~86% Quiescent current (max) <2 mA Operating temperature -40°C ~ 85°C Dimensions 65.2 x 56.2 x 22.9 mm Note: 14500 battery is NOT included. Downloads Wiki

Read more less

This 7.5-inch e-paper E-Ink display HAT for Raspberry Pi with SPI interface provides low power consumption, wide viewing angle and a paper-like display of 3 colors (red, black, white) without electricity. Advantages Of E-Ink E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect. Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40-pin GPIO extension header, supports Raspberry Pi series boards, Jetson Nano SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3/5 V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Specifications Operating voltage 3.3/5 V Interface 3-wire SPI, 4-wire SPI Display size 163.2 x 97.92 mm Dot pitch 0.205 x 0.204 mm Resolution 800 x 480 pixels Display color Red, black, white Viewing angle >170° Gray scale 2 Full refresh time 26s Refresh power 48mW (typ.) Standby current <0.01uA (almost none) Dimensions 170.2 x 111.2 mm Included 1x 7.5-inch e-Paper HAT (B) 1x RPi screws pack (2pcs) 1x GH1.25 9-pin cable (20 cm) Downloads Wiki (Manual)

Read more less

Waveshare RP2040-PiZero is a high-performance and cost-effective microcontroller board with onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40-pin GPIO header, easy to develop and integrate into the products. Features RP2040 microcontroller chip designed by Raspberry Pi Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz 264 KB of SRAM, and 16 MB of onboard Flash memory Onboard DVI interface can drive most HDMI screens (DVI compatibility required) Supports using as a USB host or slave via onboard PIO-USB port Onboard TF card slot for reading and writing TF card Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios USB 1.1 with device and host support Drag-and-drop programming using mass storage over USB Low-power sleep and dormant modes 2x SPI, 2x I²C, 2x UART, 4x 12-bit ADC, 16x controllable PWM channels Accurate clock and timer on-chip Temperature sensor Accelerated floating-point libraries on-chip Downloads Wiki

Read more less

This IPS 7.9-inch HDMI touch display with 400 x 1280 resolution, 170° wide viewing angle and built-in ferrite Hi-Fi speaker can be used as a secondary screen for chassis and also supports Raspberry Pi and Jetson Nano. Features 7.9-inch IPS display with a hardware resolution of 400 x 1280. Zinc alloy case, toughened glass panel with up to 6H hardness. When working as a computer monitor, it supports Windows without a driver. When working with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie, driver-free. When working with Jetson Nano, it supports Ubuntu, driver-free. Support backlight control for power saving. Support 5-point capacitive touch control. Specifications Display size 7.9" Viewing angle 170° Resolution 400 x 1280 pixels Display area 191.08 x 60.40 mm IPS version solor gamut 62% NTSC Max brightness 550 cd/m² Backlight adjustment Adjusted by the key/HID software Contrast 900:1 Color depth 16.7M Refresh rate 60 Hz Power port USB-C Display port HDMI interface Dimensions 211 x 73 x 20 mm Included 1x 7.9-inch Side Monitor 1x HDMI to Micro HDMI adapter 1x USB Type-A to Type-C cable (1 m) 1x HDMI flat cable (1 m) 2x Nonskid rubber feet Downloads Wiki

Read more less