Elektor Super Servo Tester Kit

  • BrandElektor Labs

Description

The Elektor Super Servo Tester can control servos and measure servo signals. It can test up to four servo channels at the same time.

The Super Servo Tester comes as a kit. All the parts required to assemble the Super Servo Tester are included in the kit. Assembling the kit requires basic soldering skills. The microcontroller is already programmed.

The Super Servo Tester features two operating modes: Control/Manual and Measure/Inputs.

  • In Control/Manual mode the Super Servo Tester generates control signals on its outputs for up to four servos or for the flight controller or ESC. The signals are controlled by the four potentiometers.
  • In Measure/Inputs the Super Servo Tester measures the servo signals connected to its inputs. These signals may come from for instance an ESC, a flight controller, or the receiver or another device. The signals are also routed to the outputs to control the servos or the flight controller or ESC. The results are shown on the display.

Specifications

Operating modes Control/Manual & Measure/Inputs
Channels 3
Servo signal inputs 4
Servo signal outputs 4
Alarm Buzzer & LED
Display 0.96' OLED (128 x 32 pixels)
Input voltage on K5 7-12 VDC
Input voltage on K1 5-7.5 VDC
Input current 30 mA (9 VDC on K5, nothing connected to K1 and K2)
Dimensions 113 x 66 x 25 mm
Weight 60 g

Included

Resistors (0.25 W)
R1, R3 1 kΩ, 5%
R2, R4, R5, R6, R7, R9, R10 10 kΩ, 5%
R8 22 Ω, 5%
P1, P2, P3, P4 10 kΩ, lin/B, vertical potentiometer
Capacitors
C1 100 µF 16 V
C2 10 µF 25 V
C3, C4, C7 100 nF
C5, C6 22 pF
Semiconductors
D1 1N5817
D2 LM385Z-2.5
D3 BZX79-C5V1
IC1 7805
IC2 ATmega328P-PU, programmed
LED1 LED, 3 mm, red
T1 2N7000
Miscellaneous
BUZ1 Piezo buzzer with oscillator
K1, K2 2-row, 12-way pinheader, 90°
K5 Barrel jack
K4 1-row, 4-way pin socket
K3 2-row, 6-way boxed pinheader
S1 Slide switch DPDT
S2 Slide switch SPDT
X1 Crystal, 16 MHz
28-way DIP socket for IC2
Elektor PCB
OLED display, 0.96', 128 x 32 pixels, 4-pin I²C interface

Links


Product form

The Elektor Super Servo Tester can control servos and measure servo signals. It can test up to four servo channels... Read more

€ 59,95 € 49,95 (incl. VAT)
Members identical

    Details

    SKU: 20624
    EAN: 7442105132164

    Description

    The Elektor Super Servo Tester can control servos and measure servo signals. It can test up to four servo channels at the same time.

    The Super Servo Tester comes as a kit. All the parts required to assemble the Super Servo Tester are included in the kit. Assembling the kit requires basic soldering skills. The microcontroller is already programmed.

    The Super Servo Tester features two operating modes: Control/Manual and Measure/Inputs.

    • In Control/Manual mode the Super Servo Tester generates control signals on its outputs for up to four servos or for the flight controller or ESC. The signals are controlled by the four potentiometers.
    • In Measure/Inputs the Super Servo Tester measures the servo signals connected to its inputs. These signals may come from for instance an ESC, a flight controller, or the receiver or another device. The signals are also routed to the outputs to control the servos or the flight controller or ESC. The results are shown on the display.

    Specifications

    Operating modes Control/Manual & Measure/Inputs
    Channels 3
    Servo signal inputs 4
    Servo signal outputs 4
    Alarm Buzzer & LED
    Display 0.96' OLED (128 x 32 pixels)
    Input voltage on K5 7-12 VDC
    Input voltage on K1 5-7.5 VDC
    Input current 30 mA (9 VDC on K5, nothing connected to K1 and K2)
    Dimensions 113 x 66 x 25 mm
    Weight 60 g

    Included

    Resistors (0.25 W)
    R1, R3 1 kΩ, 5%
    R2, R4, R5, R6, R7, R9, R10 10 kΩ, 5%
    R8 22 Ω, 5%
    P1, P2, P3, P4 10 kΩ, lin/B, vertical potentiometer
    Capacitors
    C1 100 µF 16 V
    C2 10 µF 25 V
    C3, C4, C7 100 nF
    C5, C6 22 pF
    Semiconductors
    D1 1N5817
    D2 LM385Z-2.5
    D3 BZX79-C5V1
    IC1 7805
    IC2 ATmega328P-PU, programmed
    LED1 LED, 3 mm, red
    T1 2N7000
    Miscellaneous
    BUZ1 Piezo buzzer with oscillator
    K1, K2 2-row, 12-way pinheader, 90°
    K5 Barrel jack
    K4 1-row, 4-way pin socket
    K3 2-row, 6-way boxed pinheader
    S1 Slide switch DPDT
    S2 Slide switch SPDT
    X1 Crystal, 16 MHz
    28-way DIP socket for IC2
    Elektor PCB
    OLED display, 0.96', 128 x 32 pixels, 4-pin I²C interface

    Links


    Login

    Forgot password?

    Don't have an account yet?
    Create account