Measuring Tools

2 products


  • Envox EEZ Bench Box 3 (BB3) 4-ch – Modular Test & Measurement Solution

    Envox Envox EEZ Bench Box 3 (BB3) 4-ch - Modular Test & Measurement Solution

    Out of stock

    Need a modular, open and hackable test and measurement chassis? The four-channel Envox EEZ Bench Box 3 (BB3) includes includes two DCP405 advanced DC power modules and one DCM224 dual output supplementary DC power module (max. output power 465 W). It is a great solution for product development, debugging, and circuit testing.Features Modular design – use up to three modules in any combination 4.3' TFT color touchscreen display with customizable and responsive GUI Four types of power outputs coupling under firmware control (incl. in series for max. 80 V and parallel for max. 10 A) Max. output power: 465 W Multiple output values views including YT-view for DCP405 modules Programmable lists Tracking mode OVP, OCP, OPP and OTP protection Speed controlled cooling fan SCPI programming via USB or Ethernet MicroPython scripting, Node-RED integration RTC with NTP synchronization MQTT support Easily programmable with 400+ SCPI commands Built-in Ethernet, USB and UART for remote control Build-in removable 8 GB micro SD card for data logging and programming Fast boot, FreeRTOS firmware Quiet operation thanks to multi-sensor fan speed control Software simulator Quick and easy upgrade of the DIB module’s firmware Easy maintenance, disassembling and repair Typical Applications Product development and debugging Laboratories and educational facilities Quality control and assessment Automobile electronic circuit testing Production automation testing Device or circuit characteristic verification and troubleshooting Technical Specifications STM32F769 32-bit ARM Cortex-M7 MCU, 216 MHz, 2 MB Flash, 512 KB SRAM Digital I/O: 2x buffered inputs and 2x buffered outputs (alternative functions: UART, PWM out) Rotary encoder with switch 1x user switch 3x dedicated SPI channels (2x Chip selects per channel), 40-pin IDC connector (DIB v1.0) Battery backup (CR2032 button cell type) USB FS OTG Ethernet PHY (10/100 Mbit/s) 32 KB I²C system EEPROM 8 MB SDRAM 8 GB Micro SD card 4.3' TFT color resistive touchscreen display with brightness control SWG/JTAG connector (optional) Small on-board speaker Four power relays for various power outputs coupling Full range autoswitch AC input (115 / 230 Vac) AC Soft-start (In-rush current limitation) and stand-by AC IEC C14 inlet with two 20 x 5 mm fuse AC power switch AC power input protection and EMI filter Standby LED indicator Ø80 mm DC cooling fan with speed control Kensington lock slot™ Compact size: 290 (W) x 123 (H) x 240 (D) mm Weight (populated with 2x DCP405 and 1x DCM224): 4.05 kg

    Out of stock

    € 899,00

    Members € 809,10

  • Envox EEZ Bench Box 3 (BB3) 2-ch – Modular Test & Measurement Solution

    Envox Envox EEZ Bench Box 3 (BB3) 2-ch - Modular Test & Measurement Solution

    Out of stock

    Need a modular, open and hackable test and measurement chassis? The two-channel Envox EEZ Bench Box 3 (BB3) includes two DCP405 advanced DC power modules (max. power 310 W). It is a great solution for product development, debugging, and circuit testing.Features Modular design – use up to three modules in any combination 4.3' TFT color touchscreen display with customizable and responsive GUI Four types of power outputs coupling under firmware control (incl. in series for max. 80 V and parallel for max. 10 A) Max. output power: 310 W Multiple output values views including YT-view for DCP405 modules Programmable lists Tracking mode OVP, OCP, OPP and OTP protection Speed controlled cooling fan SCPI programming via USB or Ethernet MicroPython scripting, Node-RED integration RTC with NTP synchronization MQTT support Easily programmable with 400+ SCPI commands Built-in Ethernet, USB and UART for remote control Build-in removable 8 GB micro SD card for data logging and programming Fast boot, FreeRTOS firmware Quiet operation thanks to multi-sensor fan speed control Software simulator Quick and easy upgrade of the DIB module’s firmware Easy maintenance, disassembling and repair Typical Applications Product development and debugging Laboratories and educational facilities Quality control and assessment Automobile electronic circuit testing Production automation testing Device or circuit characteristic verification and troubleshooting Technical Specifications STM32F769 32-bit ARM Cortex-M7 MCU, 216 MHz, 2 MB Flash, 512 KB SRAM Digital I/O: 2x buffered inputs and 2x buffered outputs (alternative functions: UART, PWM out) Rotary encoder with switch 1x user switch 3x dedicated SPI channels (2x Chip selects per channel), 40-pin IDC connector (DIB v1.0) Battery backup (CR2032 button cell type) USB FS OTG Ethernet PHY (10/100 Mbit/s) 32 KB I²C system EEPROM 8 MB SDRAM 8 GB Micro SD card 4.3' TFT color resistive touchscreen display with brightness control SWG/JTAG connector (optional) Small on-board speaker Four power relays for various power outputs coupling Full range autoswitch AC input (115 / 230 Vac) AC Soft-start (In-rush current limitation) and stand-by AC IEC C14 inlet with two 20 x 5 mm fuse AC power switch AC power input protection and EMI filter Standby LED indicator Ø80 mm DC cooling fan with speed control Kensington lock slot™ Compact size: 290 (W) x 123 (H) x 240 (D) mm Weight (populated with 2x DCP405 and 1x DCM224): 4.05 kg

    Out of stock

    € 799,00

    Members € 719,10

Discover Elektor's measuring instruments collection

Elektor is the place for professionals and enthusiasts involved in electronics. We not only offer a source of education and inspiration, but also an extensive range of measuring instruments. These tools are essential for anyone who wants to take their projects to the next level of precision. Whether you are working on a complex design or testing a basic component, Elektor measuring instruments guarantee reliability and quality.

Essential measuring tools for your Projects

Elektor understands that good measuring instruments are the heart of every electronics project. That is why we have a wide range of oscilloscopes, multimeters, signal generators and more in our range. These tools have been carefully selected to meet the needs of both the hobbyist and the professional. With our measuring instruments you can tackle any electronics challenge with confidence.

In the rapidly changing world of electronics, it is crucial to have access to the latest technology. Our measuring instruments are equipped with the latest developments in electronics, so that you are always ahead of the curve. At Elektor you will find everything you need to support your electronics projects, from simple tools to advanced measuring equipment.

More than just measuring instruments

At Elektor it is more than just offering tools; we provide a community and a platform for knowledge sharing. In addition to measuring instruments, Elektor magazine offers ideas, information and inspiration for your next project. We are a source of innovation for electronics designers, both for professional use and for hobby projects.

Order your measuring instruments from Elektor

  • Quality and Diversity: An extensive range of high-quality measuring instruments.
  • Competitive Prices: Competitive prices with extra benefits for Elektor members.
  • Expertise and Support: Years of experience in electronics and a reliable source of knowledge and inspiration.

Prepare for success in your electronics projects with Elektor measuring instruments. Visit our collection today and find the perfect tools to suit your needs. With Elektor you choose quality, innovation and a community that is as passionate about electronics as you are.

Login

Forgot password?

Don't have an account yet?
Create an account